Direct synthesis of Fe-Si-B-C-Cu nanocrystalline alloys with superior soft magnetic properties and ductile by melt-spinning

Structure,magnetic properties and ductile of melt-spun Fe_(83-x)Si_(4)B_(13-y)C_(y)Cu_(x)(x=0-1.7;y=0-8)alloys were investigated.The addition of 1.7 at.%Cu in a Fe_(83)Si_(4)B_(13) amorphous alloy generates abundantα-Fe crystals by providing nucleation sites,and further C doping promotes the growth of the crystals by suitable turning amorphous-forming ability,hence they increase saturation magnetic flux density(B_(s))and slightly worse magnetic softness of the as-spun alloys.The as-spun Fe_(81.3)Si_(4)B_(7)C_(6)Cu_(1.7) alloy possesses a combined structure of a fully amorphous layer in wheel side surface and predominating nanocrystalline structure with gradually enlargedα-Fe crystal,whose average size and volume fraction are determined as about 12 nm and 32%,respectively,therefore superior soft magnetic properties and ductile with a high B_(s)of 1.74 T,coercivity(H_(c))of 32.7 A/m,effective permeability(μ_(e),at 1 kHz)of 3200 and high relatively strain at fracture(ε_(f))of 3.61%can be achieved directly in this alloy by only using melt-spinning.The annealing at 578 K releases internal stress,promotes the growth of theα-Fe crystals and remains the amorphous layer of the Fe_(81.3)Si_(4)B_(7)C_(6)Cu_(1.7) alloy,then improves the soft magnetic properties and maintains the superior ductile with increasing the B_(s)andμ_(e)to 1.80 T and 14,100,respectively,lowering the H_(c)to9.4 A/m and slightly reducing theε_(f)to 2.39%.The combination of superior soft magnetic properties and ductile and simplified synthesis process entitles the Fe-Si-B-C-Cu nanocrystalline alloys great potentials in high performance electromagnetic applications.

The influence of Si substitution on soft magnetic properties and crystallization behavior in Fe_(83)B_(10)C_(6-x)Si_xCu_1 alloy system

In this study, the soft magnetic properties and crystallization behavior of Fes3B10C6-xSixCul （x=0-4） nanocrystalline alloys prepared by annealing the melt-spun amorphous ribbons have been investigated. It is found that in the Fe83B10C6-xSixCU1 alloy system, the coercivity （Hc） decreases slightly with increasing Si addition and exhibits a minimum value with composition of x = 2, while the effective permeability （Ue） shows an opposite variation trend. The saturation magnetic flux density （Bs） shows a slightly decreasing trend owing to the decreasing volume fraction of nanocrystalline phase. The Fe83B10CaSi2Cu1 nanocrystalline alloy exhibits excellent soft magnetic properties with a high Bs of 1.78 T, high ue of 13 600 and low Hc of 4 A/m.

Evolution of downsized crescent-shaped dune in wind tunnel experiment

The migration of a downsized crescent-shaped dune was investigated in a wind tunnel experiment.Quantified upwind influx and vertical oscillation of the sand bed were introduced to modulate the saturation level of the sand flux above the dune surface to affect dune evolution.The evolution was recorded by top-view photography and then abstracted as the evolution of self-defined characteristic quantities using a digital image processing algorithm.The results showed that,in contrast to the case for spanwise quantities,the evolution of streamwise quantities corresponds to a linear increase in the modulation magnitude more positively and in a monotonic and convergent manner.In contrast with quantities on the windward face,the changes in quantities with respect to the horns were nonmonotonic with time and almost uncorrelated with the variation in modulation strength,which reveals the distinctiveness of leeside evolution.