Experiment and Numerical Simulation on Axial Compressive Performance of Autoclaved Fly Ash Solid Brick Masonry Columns

To study the influence of slenderness on the axial compressive performance of autoclaved fly ash solid brick masonry columns, compression experiments were conducted on 12 samples of autoclaved fly ash solid brick masonry column and 4 samples of fired clay brick masonry column. The damage patterns and compressive performance were compared and analyzed. The experimental results indicate that the compressive bearing capacity decreases as slenderness increases from 3 to 18, and the compressive bearing capacity of the autoclaved fly ash solid brick masonry columns is lower than that of the fired clay brick masonry columns. The formulae for the axial compressive bearing capacity of autoclaved fly ash solid brick masonry columns were derived based on the experiments. The nonlinear FEA program ANSYS was adopted to simulate the behaviors of masonry columns. By comparing the simulation results and experimental results, it is shown that the simulation results agree well with the experimental ones. The rationality and applicability of the simulation results were verified.

关于东北地区利用粉煤灰制取“双免砖”的可行性研究

利用粉煤灰制取“双免砖”，取６０％～８０％的粉煤灰，２０％～４０％的添加剂，将其混合搅拌碾练后，挤压成型。根据需要及模具不同，可制得各种形状的墙体材料。其优点是不需烧结，不需蒸压养护，节煤节电，不污染环境，生产周期短，原材料来源广，成本低，容重轻，抗冻性能高。

粉煤灰水浸砖的研制开发与工艺设计

粉煤灰水浸砖是以粉煤灰为主要原料，免烧、免蒸养，用化学激发剂水溶液浸渍而制成的一种新型墙体材料。具有密度小、强度高、耐久性好、成本比烧结粘土砖低的特点。文中介绍了粉煤灰水浸砖的研究试制过程、生产工艺、分析了形成强度的机理；指出石灰的掺量、引入石灰原料的种类、激发剂品种、浸渍液温度对砖的强度有较明显的影响；最后结合工程实例简述了粉煤灰水浸砖厂的工艺设计及设计特点。

高碳粉煤灰砖的研究及生产

本文叙述了用高碳粉煤灰生产粉煤灰砖的工艺过程，介绍了工艺控制和产品性能。