Influence of mode conversions in the skull on transcranial focused ultrasound and temperature fields utilizing the wave field separation method： A numerical study

Transcranial focused ultrasound is a booming noninvasive therapy for brain stimuli. The Kelvin–Voigt equations are employed to calculate the sound field created by focusing a 256-element planar phased array through a monkey skull with the time-reversal method. Mode conversions between compressional and shear waves exist in the skull. Therefore, the wave field separation method is introduced to calculate the contributions of the two waves to the acoustic intensity and the heat source, respectively. The Pennes equation is used to depict the temperature field induced by ultrasound. Five computational models with the same incident angle of 0？and different distances from the focus for the skull and three computational models at different incident angles and the same distance from the focus for the skull are studied. Numerical results indicate that for all computational models, the acoustic intensity at the focus with mode conversions is 12.05%less than that without mode conversions on average. For the temperature rise, this percentage is 12.02%. Besides, an underestimation of both the acoustic intensity and the temperature rise in the skull tends to occur if mode conversions are ignored. However, if the incident angle exceeds 30？, the rules of the over-and under-estimation may be reversed. Moreover,shear waves contribute 20.54% of the acoustic intensity and 20.74% of the temperature rise in the skull on average for all computational models. The percentage of the temperature rise in the skull from shear waves declines with the increase of the duration of the ultrasound.

Creation of High Energy/Intensity Bremsstrahlung by a Multi-Target and Focusing of the Scattered Electrons by Small-Angle Backscatter at a Cone Wall and a Magnetic Field—Enhancement of the Outcome of Linear Accelerators in Radiotherapy

The yield of bremsstrahlung (BS) from collisions of fast electrons (energy at least 6 MeV) with a Tungsten target can be significantly improved by exploitation of Tungsten wall scatter in a multi-layered target. A simplified version of a previously developed principle is also able to focus on small angle scattered electrons by a Tungsten wall. It is necessary that the thickness of each Tungsten layer does not exceed 0.04 mm—a thickness of 0.03 mm is suitable for accelerators in medical physics. Further focusing of electrons results from suitable magnetic fields with field strength between 0.5 Tesla and 1.2 Tesla (if the cone with multi-layered targets is rather narrow). Linear accelerators in radiation therapy only need to be focused by wall scatter without further magnetic fields (a standard case: 31 plates with 0.03 mm thickness and 1 mm distance between the plates). We considered three cases with importance in medical physics: A very small cone with an additional magnetic field for focusing (the field diameter at 90 cm depth: 6 cm), a medium cone with an optional magnetic field (field diameter at 90 cm depth: 13 cm) and a broad cone without a magnetic field (the field diameter at 90 cm depth: 30 cm). All these cases can be positioned in a carousel. Measurements have been performed in the existing carousel positioned in the plane of the flattening filter and scatter foils for electrons.

Second harmonic generation of metal nanoparticles under tightly focused illumination

The near-field and far-field second harmonic （SH） responses of a metal spherical nanoparticle placed in the focal region of a highly focused beam are investigated by using the calculation model based on three-dimensional finite-difference time-domain （FDTD） method. The results show that off-axis backward-propagating SH response can be reinforced by tightly focusing, due to the increase of the relative magnitude of the longitudinal field component and the phase shift along the propagation direction.

Simulating Underwater Plasma Sound Sources to Evaluate Focusing Performance and Analyze Errors

Focused underwater plasma sound sources are being applied in more and more fields. Focusing performance is one of the most important factors determining transmission distance and peak values of the pulsed sound waves. The sound source’s components and focusing mechanism were all analyzed. A model was built in 3D Max and wave strength was measured on the simulation platform. Error analysis was fully integrated into the model so that effects on sound focusing performance of processing-errors and installation-errors could be studied. Based on what was practical, ways to limit the errors were proposed. The results of the error analysis should guide the design, machining, placement, debugging and application of underwater plasma sound sources.

Superpixel-Based Complex Field Modulation Using a Digital Micromirror Device for Focusing Light through Scattering Media

We present a digital micromirror device（DMD） based superpixel method for focusing light through scattering media by modulating the complex field of incident light. Firstly, we numerically and experimentally investigate focusing light through a scattering sample using the superpixel methods with different target complex fields.Then, single-point and multiple-point focusing experiments are performed using this superpixel-based complex modulation method. In our experiment, up to 71.5% relative enhancement is realized. The use of the DMDbased superpixel method for the control of the complex field of incident light opens an avenue to improve the enhancement of focusing light through scattering media.

Structural and mechanical properties of Al–C–N films deposited at room temperature by plasma focus device

The Al–C–N films are deposited on Si substrates by using a dense plasma focus（DPF） device with aluminum fitted central electrode（anode） and by operating the device with CH_4/N_2 gas admixture ratio of 1：1. XRD results verify the crystalline Al N（111） and Al_3CON（110） phase formation of the films deposited using multiple shots. The elemental compositions as well as chemical states of the deposited Al–C–N films are studied using XPS analysis, which affirm Al–N, C–C, and C–N bonding. The FESEM analysis reveals that the deposited films are composed of nanoparticles and nanoparticle agglomerates. The size of the agglomerates increases at a higher number of focus deposition shots for multiple shot depositions. Nanoindentation results reveal the variation in mechanical properties（nanohardness and elastic modulus）of Al–C–N films deposited with multiple shots. The highest values of nanohardness and elastic modulus are found to be about 11 and 185 GPa, respectively, for the film deposited with 30 focus deposition shots. The mechanical properties of the films deposited using multiple shots are related to the Al content and C–N bonding.

Redistributing the energy flow of tightly focused ellipticity-variant vector optical fields

The redistribution of the energy flow of tightly focused ellipticity-variant vector optical fields is presented.We theoretically design and experimentally generate this kind of ellipticity-variant vector optical field, and further explore the redistribution of the energy flow in the focal plane by designing different phase masks including fanlike phase masks and vortex phase masks on them. The flexibly controlled transverse energy flow rings of the tightly focused ellipticity-variant vector optical fields with and without phase masks can be used to transport multiple absorptive particles along certain paths, which may be widely applied in optical trapping and manipulation.

A novel technique for improving of ultrasonic TOFD data

Traditional ultrasonic TOFD （ time of flight diffraction） has the major shortcoming of low amplitude of diffractive wave which brings about lack of sensitivity for weld defect detection. Aimed at the technological limitation, a novel TOFD method is proposed by developing a focusing probe. Through the analyses and calculation of sound field distribution based on geometric acoustics, a cylindrical surface wedge is designed and produced. Artificial defect containing testing piece is made and tested using both traditional and focusing TOFD, and the received signal and image are compared. The result shows that the proposed focusing method can converge the emitted sound energy effectively and improve testing sensitivity greatly. Compared with traditional TOFD tested data, focusing TOFD tested defect wave in A-scan line and defect diffractive stripe in D-scan image can be identified easily.

Tuning the fields focused by a high NA lens using spirally polarized beams(Invited Paper)

We show the power of spirally polarized doughnut beams as a tool for tuning the field distribution in the focus of a high numerical aperture （NA） lens. Different and relevant states of polarization as well as field distributions can be created by the simple turning of a λ/2 retardation wave plate placed in the excitation path of a micro- scope. The realization of such a versatile excitation source can provide an essential tool for nanotechnology investigations and biomedical experiments.

Light field head-mounted display with correct focus cue using micro structure array

A new type of light fiehl display is proposed using a head-mounted display （HMD） and a micro structure array （MSA, lens array or pinhole array）. Each rendering point emits abundant rays from different directions into the viewer＇s pupil, and at one time the dense light field is generated inside the exit pupil of the HMD through the eyepiece. Therefore, the proposed method not only solves the problem of accommodation and convergence conflict in a traditional HMD, but also drastically reduces the huge data in real three-dimensional （3D） display. To demonstrate the proposed method, a prototype is developed, which is capable of giving the observer a real perception of depth.

Detecting the vector of nanoscale light field with atomic defect

Modulation of a vector light field has played an important role in the research of nanophotonics.However,it is still a great challenge to accurately measure the three-dimensional vector distribution at nanoscale.Here,based on the interaction between the light field and atomic-sized nitrogen-vacancy(NV)color center in diamonds,we demonstrate an efficient method for vectorial mapping of the light-field distribution at nanoscale.Single NV centers with different but well-defined symmetry axes are selected and then interact with the same tightly focused light field.The excitation of a single NV center is related to the angle between the NV center axis and the polarization of the light field.Then the fluorescence patterns of different NV centers provide the information on the vectorial light field distribution.Subsequently analyzing the fluorescence patterns with the help of a deep neural network,the intensity and phase of the light-field vectorial components are fully reconstructed with nanometer resolution.The experimental results are in agreement with theoretical calculations.It demonstrates that our method can help to study light–matter interaction at nanoscale and extend the application of vector light fields in research on nanophotonics.