Analysis of the Caudal Vortices Evolvement around Flapping Foil

The viscous flow field around two-dimensional flapping （ heaving and pitching） foils was numerically computed. The structural characteristics of caudal vortices were investigated and the contour curves at different phase angles were obtained. The relationships between the structural characteristics of the vortices and the force acting on the foil and between the widths of the caudal vortex street and of the caudal flow field were analyzed. A method to determine the shedding frequency of the vortices was proposed.

全附体潜艇粘性流场的RANS模拟及场量和涡量的校验分析

采用相同拓扑结构和相近网格质量的4套网格和5种湍流模型,对全附体Suboff潜艇粘性流场进行RANS模拟,分析了网格密度、节点空间分布规律和湍流模型对计算精度的影响,详细校验了其力积分量、速度场量和涡量特征。结果表明:网格密度最大的G4网格(140万)计算精度最高,总阻力较实验值误差为0.723%,其采用SST湍流模型时最优。计算得到的压力系数和剪切应力系数分布均与实验值吻合很好;桨盘面速度等值线分布计算精度与文献相当,轴向相对速度0.9以上的计算半径稍大于实验值,其余半径与实验吻合较好;桨盘面上0.25倍半径处速度分量沿周向分布计算精度较文献高,轴向分量与实验值吻合较好,径向分量峰值稍小于实验值,但峰值所处周向位置与实验值一致。成功捕捉到了附体端面绕流诱导对旋涡、附体叶根截面下游处项链形涡对、尾翼端面尾缘上方附着涡蹄、附体马蹄涡系、尾翼截面通道流体挤压作用诱导涡以及桨盘面涡量汇集的潜艇涡量场特征,且围壳端面绕流诱导对旋涡沿流动方向持续稳定,不影响桨盘面涡量场,均与文献中由大涡模拟模拟得到的定性结论一致。研究表明,在网格密度较大、节点分布合理、网格质量较高、湍流模型选取适当和壁面函数使用有效的条件下,RANS模拟潜艇粘性流场的场量和涡量特征同样具有很高的计算精度,能够在工程应用中有力支撑新型艇型设计与性能分析。