Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.

Novel magneto-rheological fluid damper for passive force/torque feedback

The damper is capable of providing a continuously variable dampering force/torque in response to a magnetic field. It consists of an upside cap and an underside cap with a rotor located between them, the magneto-rheological （MR） fluid is filled into the gaps between the rotor and the caps. When the viscosity of the MR fluid increases under the influence of the magnetic field, the movement of the rotor will be resisted. The output torque is made up of the torque caused by the magnetic field, the torque caused by the plastic viscosity of the MR fluid, and the torque caused by the coulomb friction. The viscous torque can be calculated by a simple method and the frictional torque can be obtained by experiments. The torque dependent on the magnetic field is obtained by electromagnetic finite dement analysis. Experiments are done on the damper prototype and the validity of the design is verified.

Experimental Research of Force Feedback Dataglove Based on Pneumatic Artificial Muscle

Force feedback dataglove is an important interface of human-machine interaction between manipulator and virtual assembly system, which is in charge of the bidirectional transmission of movement and force information between computer and operator. The exoskeleton force feedback dataglove is designed taking the pneumatic artificial muscle as actuator, meanwhile, its structure and work principle are introduced, and the force control problem is analyzed and researched by experiment. The mathematic model of grasping rigid object for finger is established. Considering the friction of tendon-sheath system and finger deformation, the closed-loop force control for a single joint, a single finger and multi-fingers are studied respectively by the feedforward proportional-integral（PI） control method with variable arguments. On the premise of the force smoothness, the control error of the force exerted on the finger joint is in the range of ±0.25 N, which meets the requirement of force feedback. By experimental analysis, the reason of force fluctuation is that the finger joint has a small amplitude quiver, and the consistent change tendency of the force between proximal interphalangeal（PIP） joint and distal interphalangeal（DIP） joint results from their angle coupling relationship.

Force Feedback Coupling with Dynamics for Physical Simulation of Product Assembly and Operation Performance

Most existing force feedback methods are still difficult to meet the requirements of real-time force calculation in virtual assembly and operation with complex objects. In addition, there is often an assumption that the controlled objects are completely flee and the target object is only completely fixed or flee, thus, the dynamics of the kinematic chain where the controlled objects are located are neglected during the physical simulation of the product manipulation with force feedback interaction. This paper proposes a physical simulation method of product assembly and operation manipulation based on statistically learned contact force prediction model and the coupling of force feedback and dynamics. In the proposed method, based on hidden Markov model （HMM） and local weighting learning （LWL）, contact force prediction model is constructed, which can estimate the contact force in real time during interaction. Based on computational load balance model, the computing resources are dynamically assigned and the dynamics integral step is optimized. In addition, smoothing process is performed to the force feedback on the synchronization points. Consequently, we can solve the coupling and synchronization problems of high-frequency feedback force servo. low-frequency dynamics solver servo and scene rendering servo, and realize highly stable and accurate force feedback in the physical simulation of product assembly and operation manipulation. This research proposes a physical simulation method of product assembly and operation manipulation.

FORCE FEEDBACK DATAGLOVE BASED ON PNEUMATIC ARTIFICIAL MUSCLES

An exoskeleton force feedback dataglove is developed, which uses the pneumatic artificial muscles as actuators. On the basis of the simplified hand model, the motion equation is deduced according to the theory of Denavit-Hartenberg. The model of the equivalent contact forces exerted by the object on the finger is proposed. By the principle of virtual work, the static equilibrium of finger is established. The force Jacobian matrix of finger is calculated, and then the joint torques of the finger when grasping objects are obtained. The theory and structure of the force feedback datagolve are introduced. Based on the theory of motion stabilization of four-bar linkage, the flexion angles of joints are measured. The torques on finger joints caused by the output forces of pneumatic artificial muscles are calculated. The output forces of pneumatic artificial muscle, whose values are controlled by its inner pressure, can be calculated by the joint torques of the finger when grasping objects. The arms of force, driving torques and the needed output forces of pneumatic muscle are calculated for each joint of the index finger. The criterion of output force of pneumatic muscle is given.

PI force feedback control for large flexible structure vibration with active tendons

Active tendon, consisting of a displacement actuator and a collocated force sensor, was first presented by Preumont and his co-workers to attenuate the vibration of large flexible space structures, and the control algorithm adopted by them was integral force feedback. This paper presents a new proportional-integral （PI） force feedback algorithm to achieve larger damping ratios for the structure without the requirement of structure model. Stability of the control system is shown, and simulations of a structure similar to JPL-MPI demonstrate the effectiveness of the proposed algorithm for vibration control of space structures.

Design and Study of Virtual Interventional Surgical System with Force Feedback

A virtual interventional surgical system with force feedback is designed to provide practice before complicated interventional operation and assistance during operation.The collision detection,vessel deformation calculating and virtual force computing of the virtual system are implemented by using skeleton spring model as the physical modeling foundation,which is based on the mass spring model and easy to construct with high computing efficiency.In order to increase the real time performance,the central plane of the vessel model is extracted and then simplified to complete the skeleton filling.The initiative bending kinematics of the virtual catheter is analyzed so as to provide the virtual system with higher fidelity.The experimental results show that the virtual system can well simulate the vessel deformation and force feedback within an interventional surgery,which gives the virtual system better immersion.

Enhancement of Stabilization Control in Remote Robot System with Force Feedback

In this paper, we deal with a remote robot system in which a user can operate an industrial robot with a force sensor at a remote location by using a haptic interface device. We apply a method using the wave filter together with the phase control filter which was previously proposed by the authors to the remote robot system for stabilization control. We also propose a method to enhance the haptic quality. By experiment, we demonstrate the effectiveness of the proposed method. We compare the proposed method with the conventional method quantitatively and clarify which domains the proposed method is applied to more effectively.

ForceCT双能量与低kV扫描技术在头颈CTA中的对比分析

探索并比较Force CT双能量与低kV扫描技术在头颈CTA中的作用。方法 以系统随机化法,将2022.01-2023.01在我院接受头颈CTA检查的40例患者均分为两组各20例。其中观察组患者采用低kV扫描技术,对照组则进行Force CT双能量扫描。比较两组的辐射剂量、图像质量。结果 观察组的辐射剂量指数低于对照组,P<0.05。观察组的大脑中动脉与颈内动脉图像质量均高于对照组,P<0.05。结论 运用低kV扫描技术,能较好地降低头颈CTA检查时的辐射剂量,与此同时还能得到更为高质量的图像,帮助病情的更快诊断,患者能尽快得到个性化的治疗,早日恢复健康。

Force CT高级建模迭代重建算法对门静脉图像质量的影响

目的:探讨Force CT高级建模迭代重建算法(ADMIRE)对门静脉图像质量影响。方法:回顾性分析2022年1—4月于中山大学附属第八医院行上腹部CT平扫及增强的40例患者影像资料,在syngo.via后处理工作站重建,采用门脉期原始数据重建出滤波反投影算法(FBP)、ADMIRE1、ADMIRE3、ADMIRE5 4组不同重建算法的图像,在4组不同算法图像上测量门静脉干中心位置、肝实质及同层竖脊肌的CT值和噪声值,计算门静脉和肝实质的信噪比(SNR)和对比噪声比(CNR)。此外,由两位具有5年以上诊断经验的医生对图像进行主观评分。结果:随着迭代等级的增高,图像的CNR、SNR呈现上升的趋势,图像的噪声值呈现下降的趋势,其中ADMIRE5组图像中门静脉和肝脏具有最高的CNR和SNR且具有最低的噪声值,以及最高的主观评分,采用ADMIRE5重建算法的门静脉与周围组织对比非常好,门静脉5级分支显示良好。结论:高级建模迭代重建ADMIRE算法相比于FBP重建算法,降噪效果更好,门静脉的显示更加锐利,能提升门静脉的图像质量。

Orthodontic simulation system with force feedback for training complete bracket placement procedures

Background A virtual system that simulates the complete process of orthodontic bracket placement can be used for pre-clinical skill training to help students gain confidence by performing the required tasks on a virtual patient.Methods The hardware for the virtual simulation system is built using two force feedback devices to support bi-manual force feedback operation.A 3D mouse is used to adjust the position of the virtual patient.A multi-threaded computational methodology is adopted to satisfy the requirements of the frame rate.The computation threads mainly consist of the haptic thread running at a frequency of>1000Hz and the graphic thread at>30Hz.The graphic thread allows the graphics engine to effectively display the visual effects of biofilm removal and acid erosion through texture mapping.Using the haptic thread,the physics engine adopts the hierarchy octree collision-detection algorithm to simulate the multi-point and multi-region interaction between the tools and the virtual environment.Its high efficiency guarantees that the time cost can be controlled within 1 ms.The physics engine also performs collision detection between the tools and particles,making it possible to simulate paint and removal of colloids.The surface-contact constraints are defined in the system;this ensures that the bracket will not divorce from or embed into the tooth during the adjustment of the bracket.Therefore,the simulated adjustment is more realistic and natural.Results A virtual system to simulate the complete process of orthodontic bracket bonding was developed.In addition to bracket bonding and adjustment,the system simulates the necessary auxiliary steps such as smearing,acid etching,and washing.Furthermore,the system supports personalized case training.Conclusions The system provides a new method for students to practice orthodontic skills.

NOVEL 6-DOF WEARABLE EXOSKELETON ARM WITH PNEUMATIC FORCE-FEEDBACK FOR BILATERAL TELEOPERATION

A particular emphasis is put on a novel wearable exoskeleton arm, ZJUESA, with 6 degrees of freedom, which is used for the robot teleoperation with the force-feedback in the unknown environment. In this external structure mechanism, the 3-revolution-prismatic-spherical （3RPS） parallel mechanism is devised from the concept of the human upper-limb anatomy and applied for the shoulder 3-DOF joint. Meanwhile, the orthogonal experiment design method is introduced for its optimal design. Aiming at enhancing the performance of teleoperation, the force feedback is employed by the pneumatic system on ZJUESA to produce the vivid feeling in addition to the soft control interface. Due to the compressibility and nonlinearity of the pneumatic force feedback system, a novel hybrid fuzzy controller for the precise force control is proposed and realized based on the Mega8 microcontroller units as the units of the distributed control system on ZJUESA. With the results of several experiments for master-slave control with force feedback, the feasibility of ZJUESA system and the effect of its hybrid fuzzy controller are verified.

Force-feedback based active compliant position control strategy for a hydraulic quadruped robot

Most existing legged robots are developed under laboratory environments and, corre- spondingly, have good performance of locomotion. The robots＇ ability of walking on rough terrain is of great importance but is seldom achieved. Being compliant to external unperceived impacts is cru- cial since it is unavoidable that the slip, modeling errors and imprecise information of terrain will make planned trajectories to be followed with errors and unpredictable contacts. The impedance control gives an inspiration to realize an active compliance which allows the legged robots to follow reference trajectories and overcome external disturbances. In this paper, a novel impedance force/ position control scheme is presented, which is based on Cartesian force measurement of leg＇ s end effector for our hydraulic quadruped robot The simulation verifies the efficiency of the impedance model, and the experimental results at the end demonstrate the feasibility of the proposed control scheme.

Miniature 6-axis force/torque sensor for force feedback in robot-assisted minimally invasive surgery

In order to restore force sensation to robot-assisted minimally invasive surgery(RMIS),design and performance evaluation of a miniature 6-axis force/torque sensor for force feedback is presented.Based on the resistive sensing method,a flexural-hinged Stewart platform is designed as the flexible structure,and a straightforward optimization method considering the force and sensitivity isotropy of the sensor is proposed to determine geometric parameters which are best suited for the given external loads.The accuracy of this method is preliminarily discussed by finite element methods(FEMs).The sensor prototype is fabricated with the development of the electronic system.Calibration and dynamic loading tests for this sensor prototype are carried out.The working ranges of this sensor prototype are 30 N and 300 N·mm,and resolutions are 0.08 N in radial directions,0.25 N in axial direction,and 2.4 N·mm in rotational directions.It also exhibits a good capability for a typical dynamic force sensing at a frequency close to the normal heart rate of an adult.The sensor is compatible with surgical instruments for force feedback in RMIS.

FORCE FEEDBACK MODEL OF ELECTRO-HYDRAULIC SERVO TELE-OPERATION ROBOT BASED ON VELOCITY CONTROL

The tele-operation robotic system which consists of an excavator as the construction robot, and two joysticks for operating the robot from a safe place are useful for performing restoration in damaged areas. In order to accomplish a precise task, the operator needs to feel a realistic sense of task force brought about from a feedback force between the fork glove of slave robot and unfamiliar environment. A novel force feedback model is proposed based on velocity control of cylinder to determine environment force acting on fork glove. Namely, the feedback force is formed by the error of displacement of joystick with velocity and driving force of piston, and the gain is calculated by the driving force and threshold of driving force of hydraulic cylinder. Moreover, the variable gain improved algorithm is developed to overcome the defect for grasping soft object. Experimental results for fork glove freedom of robotic system are provided to demonstrate the developed algorithm is available for grasping soft object.

A Fully Differential Interface Circuit of Closed-loop Accelerometer with Force Feedback Linearization

In this paper,a fifth-order fully differential interface circuit( IC) is presented to improve the noise performance for micromechanical sigma-delta( Σ-Δ) accelerometer. A lead compensator is adopted to ensure the stability of the closed-loop high-order system. A low noise capacitance detection circuit is described with a correlated-double-sampling( CDS) technique to decrease 1 /f noise and offset of the operational amplifier. This paper also proposes a self-test technique for the interface circuit to test the harmonic distortion. An electrostatic force feedback linearization circuit is presented to reduce the harmonic distortion resulting in larger dynamic range( DR). The layout of the IC is implemented in a standard 0. 6 μm CMOS technology and operates at a sampling frequency of 250 kHz. The interface consumes 20 mW from a 5 V supply. The post-simulation results indicate that the noise floor of the digital accelerometer is about- 140 dBV /Hz1 /2at low frequency. The sensitivity is 2. 5 V /g and the nonlinearity is 0. 11%. The self-test function is achieved with 98. 2 dB thirdorder harmonic distortion detection based on the electrostatic force feedback linearization.

A force feedback master finger in exoskeleton type

In order to eliminate the drawbacks of conventional force feedback gloves, a new type of master fin- ger has been developed. By utilizing three ＂four-bar mechanism joint＂ in series and wire coupling mecha- nism, the master finger transmission ratio is kept exactly 1：1.4：1 in the whole movement range and it can make active motions in both extension and flexion directions. Additionally, to assure faster data transmission and near zero delay in the master-slave operation, a digital signal processing/field programmable gate array （DSP/FPGA-FPGA） structure with 200μs cycle time is designed. The operating modes of the master finger can be contact or non-contact, which depends on the motion states of a slave finger, free motion or constrained motion. The position control employed in non-contact mode ensures unconstrained motion and the force control adopted in contact mode guarantees natural contact sensation. To evaluate the performances of the master finger, an experiment between the master finger and a DLR/HTT dexterous finger is conducted. The results demonstrate that this new type master finger can augment telepresence.

Robot Position Control Using Force Information for Cooperative Work in Remote Robot Systems with Force Feedback

This paper proposes robot position control using force information for cooperative work between two remote robot systems with force feedback in each of which a user operates a remote robot by using a haptic interface device while observing work of the robot with a video camera. We also investigate the effect of the proposed control by experiment. As cooperative work, we deal with work in which two robots carry an object together. The robot position control using force information finely adjusts the position of the robot arm to reduce the force applied to the object. Thus, the purpose of the control is to avoid large force so that the object is not broken. In our experiment, we make a comparison among the following three cases in order to clarify how to carry out the control effectively. In the first case, the two robots are operated manually by a user with his/her both hands. In the second case, one robot is operated manually by a user, and the other robot is moved automatically under the proposed control. In the last case, the object is carried directly by a human instead of the robot which is operated by the user in the second case. As a result, experimental results demonstrate that the control can help each system operated manually by the user to carry the object smoothly.

Basic Characteristics of the Hydraulic-Driven Forceps for Force Feedback

A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator systems are suitable for careful work, but they have a few problems. One of the problems is that the manipulator is not equipped with haptic sensing functions. Therefore, the operator must know the advanced techniques for visually detecting the physical contact state during surgical operations. These haptic sensing functions thus need to be incorporated into a surgical manipulator. We have developed hydraulic-driven forceps with a micro bearing and a bellows tube that can convey haptic sense to the operator. This system can measure the small forces acting on the tips of the forceps using Pascal＇s principle. A model of the system is provided from the relationship between the internal pressure of the bellows tube and the refraction angles of the forceps. It was confirmed using this model that the developed system makes it possible to estimate both the strength and the direction of the external force applied to the forceps by measuring the internal pressure of the bellows tube. An operator using a three-dimensional haptic device was able to feel the force response during an experiment in which they used the forceps to hold a blood vessel. This report describes the most appropriate method for letting the operator feel the force conveyed by using our system.