The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs...The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs and the guiderail friction for realizing different levels of vibration isolation.The isolation capacities are investigated on the strategies with both the horizontal and vertical guiderails,with the horizontal rail only,and without guiderails.The compressive preloads generally result in the consumption of most of the initial excitation energy so as to overcome the potential threshold.The isolation onsets at the frequency ratio of 1∓0.095 on the left-hand side(LHS)and the right-hand side(RHS)of the lever are relative to the load plate connector.The observed near resonant isolation thus makes the LEDAR system a candidate for the isolation of the mechanical systems about resonance while opening a path for simultaneous harvesterisolation functions and passive functions at extreme frequencies.展开更多
Aiming at the problems of long time and poor machining precision in processing the tractor lever workpiece,a special fixture suitable for the tractor lever workpiece is designed by analyzing the processing technology ...Aiming at the problems of long time and poor machining precision in processing the tractor lever workpiece,a special fixture suitable for the tractor lever workpiece is designed by analyzing the processing technology of the lever workpiece,and the workpiece is accurately positioned and tightened under the action of the special fixture.Efficient machining of the workpiece can be achieved by using a drill template.The fixture not only has the advantages of high production efficiency,low cost and high life,but also effectively improves the processing technology of the workpiece,and has certain reference value for the subsequent fixture improvement design.展开更多
With the socio-economic change that has taken place over the last years,in addition to an increase in sustainability regulation,stakeholders have gained importance and organizations are more active in relation to gene...With the socio-economic change that has taken place over the last years,in addition to an increase in sustainability regulation,stakeholders have gained importance and organizations are more active in relation to generating social impact,but society demands more and better social impact from organizations.The objectives of this paper are to clarify the concepts of impact and social impact optimization,and to detect levers and barriers to help organizations optimize the social impact that they generate.A qualitative approach based on interviews with social impact leaders from organizations with different forms(big companies,small and medium-sized enterprises,corporate foundations,b-corps,community foundations,public and private foundations,associations and investing firms)is applied,together with focus groups with stakeholders from those organizations that are best practices.展开更多
Unusual head trauma is rare with various mechanisms of occurrence. The injuries can be similar to those of road accidents but sometimes with significant complexities. The objective was to determine the frequency of th...Unusual head trauma is rare with various mechanisms of occurrence. The injuries can be similar to those of road accidents but sometimes with significant complexities. The objective was to determine the frequency of this pathology in our practice, describe the different mechanisms and report the craniocerebral lesions caused by this type of trauma. Materials and Method: This was a descriptive study with retrospective collection spread over a period of 3 years. After selecting the files, the patients and/or their companions were contacted by telephone to inquire about them and then returned to the consultation for reassessment. Disease history and information were obtained from patients’ medical records. Result: The frequency of this pathology was 1.78% and his incidence was 0.4 cases per month. The average age of the patients was 13.47 years. All the victims were male. 41.17% of patients were in school. The mechanisms of trauma were the hoof blow 47.1%, the horn blow 29.4% and the stone blow 11.7% respectively. 23.5% of patients were confused and 11.7% children were in coma. One patient presented an anisocoria. The motor deficit was present in 5 cases. CT-scan made it possible to highlight a skull depressing fracture 58.8% and confirm a craniocerebral wound in 35.3%. The average time between patient admission to hospital and completion of surgery was 24.5 hours. The surgery had consisted of the trimming of cranio-cerebral wounds, exploration, duroplasty and lifting of skull depressing fracture. After 15 months of follow-up, the evolution was favorable in 53.3%, the morbidity was 33.4% and the mortality 17.6%. Conclusion: These are rare but serious conditions because they are fatal and disabling. An early and multidisciplinary management can hope to have a good favorable.展开更多
基金partially supported by the Nottingham Ningbo China Beacons of Excellence Research and Innovation Institute (No. I01211200001)LDS 2023 Educational Foundation of The University of Nottingham Ningbo China (No. E06221200002)
文摘The levered-dual response(LEDAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear springs.It takes the advantages of both the preloads/offsets in linear springs and the guiderail friction for realizing different levels of vibration isolation.The isolation capacities are investigated on the strategies with both the horizontal and vertical guiderails,with the horizontal rail only,and without guiderails.The compressive preloads generally result in the consumption of most of the initial excitation energy so as to overcome the potential threshold.The isolation onsets at the frequency ratio of 1∓0.095 on the left-hand side(LHS)and the right-hand side(RHS)of the lever are relative to the load plate connector.The observed near resonant isolation thus makes the LEDAR system a candidate for the isolation of the mechanical systems about resonance while opening a path for simultaneous harvesterisolation functions and passive functions at extreme frequencies.
基金supported by the Henan Natural Science Foundation (No.222300420168)the Natural Science Foundation of Henan Polytechnic University (B2021-31)Fundamental Research Funds for the Universities of Henan Province (No.NSFRF220415).
文摘Aiming at the problems of long time and poor machining precision in processing the tractor lever workpiece,a special fixture suitable for the tractor lever workpiece is designed by analyzing the processing technology of the lever workpiece,and the workpiece is accurately positioned and tightened under the action of the special fixture.Efficient machining of the workpiece can be achieved by using a drill template.The fixture not only has the advantages of high production efficiency,low cost and high life,but also effectively improves the processing technology of the workpiece,and has certain reference value for the subsequent fixture improvement design.
文摘With the socio-economic change that has taken place over the last years,in addition to an increase in sustainability regulation,stakeholders have gained importance and organizations are more active in relation to generating social impact,but society demands more and better social impact from organizations.The objectives of this paper are to clarify the concepts of impact and social impact optimization,and to detect levers and barriers to help organizations optimize the social impact that they generate.A qualitative approach based on interviews with social impact leaders from organizations with different forms(big companies,small and medium-sized enterprises,corporate foundations,b-corps,community foundations,public and private foundations,associations and investing firms)is applied,together with focus groups with stakeholders from those organizations that are best practices.
文摘Unusual head trauma is rare with various mechanisms of occurrence. The injuries can be similar to those of road accidents but sometimes with significant complexities. The objective was to determine the frequency of this pathology in our practice, describe the different mechanisms and report the craniocerebral lesions caused by this type of trauma. Materials and Method: This was a descriptive study with retrospective collection spread over a period of 3 years. After selecting the files, the patients and/or their companions were contacted by telephone to inquire about them and then returned to the consultation for reassessment. Disease history and information were obtained from patients’ medical records. Result: The frequency of this pathology was 1.78% and his incidence was 0.4 cases per month. The average age of the patients was 13.47 years. All the victims were male. 41.17% of patients were in school. The mechanisms of trauma were the hoof blow 47.1%, the horn blow 29.4% and the stone blow 11.7% respectively. 23.5% of patients were confused and 11.7% children were in coma. One patient presented an anisocoria. The motor deficit was present in 5 cases. CT-scan made it possible to highlight a skull depressing fracture 58.8% and confirm a craniocerebral wound in 35.3%. The average time between patient admission to hospital and completion of surgery was 24.5 hours. The surgery had consisted of the trimming of cranio-cerebral wounds, exploration, duroplasty and lifting of skull depressing fracture. After 15 months of follow-up, the evolution was favorable in 53.3%, the morbidity was 33.4% and the mortality 17.6%. Conclusion: These are rare but serious conditions because they are fatal and disabling. An early and multidisciplinary management can hope to have a good favorable.
