Propagation Dynamics of Forced Pulsating Waves for a Time Periodic Lotka-Volterra Cooperative System with Nonlocal Effects in Shifting Habitats

In this paper, we will concern the existence, asymptotic behaviors and stability of forced pulsating waves for a Lotka-Volterra cooperative system with nonlocal effects under shifting habitats. By using the alternatively-coupling upper-lower solution method, we establish the existence of forced pulsating waves, as long as the shifting speed falls in a finite interval where the endpoints are obtained from KPP-Fisher speeds. The asymptotic behaviors of the forced pulsating waves are derived. Finally, with proper initial, the stability of the forced pulsating waves is studied by the squeezing technique based on the comparison principle.

Forced Oscillation of Neutral Advanced Dynamic Equations with Positive and Negative Coeffcients on Time Scales

In this paper,we consider the forced neutral advanced dynamic equations with positive and negative coeffcients[x(t)-R(t)x(t+r)]+P(t)x(t+τ)△Q(t)x(t+δ)= f(t),t≥t0 on a time scale T.Several suffcient conditions are obtained for the oscillation of the dynamic equations.The main result is illustrated by an example.

Expiratory Flow Limitation and Its Relation to Dyspnea and Lung Hyperinflation in Patients with Chronic Obstructive Pulmonary Disease: Analysis Using the Forced Expiratory Flow-Volume Curve and Critique

Background: Tidal expiratory flow limitation (tEFL) is defined as absence of increase in air flow during forced expiration compared to tidal breathing and is related to dyspnea at rest and minimal exertion in patients with chronic airflow limitation (CAL). Tidal EFL has not been expressed as a continuous variable (0% - 100%) in previous analyses. Objective: To relate the magnitude of tEFL to spirometric values and Modified Medical Research Council (MMRC) score and Asthma Control Test (ACT). Methods: Tidal EFL was computed as percent of the tidal volume (0% - 100%) spanned (intersected) by the forced expiratory-volume curve. Results: Of 353 patients screened, 192 (114 M, 78 F) patients (136 with COPD, 56 with asthma) had CAL. Overall characteristics: (mean ± SD) age 59 ± 11 years, BMI 28 ± 7, FVC (% pred) 85 ± 20, FEV1 (% pred) 66 ± 21, FEV1/FVC 55% ± 10%, RV (% pred) 147 ± 42. Tidal EFL in patients with tEFL was 53% ± 39%. Using univariate analysis, strongest correlations were between tEFL and FVC and between tEFL and RV in patients with BMI < 30 kg/m2. In patients with nonreversible CAL, tEFL was positively associated with increasing MMRC, negatively with spirometric measurements, and positively with RV/TLC. In asthmatics, ACT scores were higher in patients with mean BMI ≥ 28 kg/m2 (p < 0.00014) and RV/TLC values > 40% (p < 0.03). Conclusions: Dyspnea is strongly associated with tEFL and lung function, particularly in patients with nonreversible CAL. Air trapping and BMI contribute to tEFL.

FINITE TIME BLOW UP OF THE SOLUTIONS TO BOUSSINESQ EQUATION WITH LINEAR RESTORING FORCE AND ARBITRARY POSITIVE ENERGY

Finite time blow up of the solutions to Boussinesq equation with linear restoring force and combined power nonlinearities is studied. Sufficient conditions on the initial data for nonexistence of global solutions are derived. The results are valid for initial data with arbitrary high positive energy. The proofs are based on the concave method and new sign preserving functionals.

Restoring force correction based on online discrete tangent stiffness estimation method for real-time hybrid simulation

In real-time hybrid simulation（RTHS）, it is difficult if not impossible to completely erase the error in restoring force due to actuator response delay using existing displacement-based compensation methods. This paper proposes a new force correction method based on online discrete tangent stiffness estimation（online DTSE） to provide accurate online estimation of the instantaneous stiffness of the physical substructure. Following the discrete curve parameter recognition theory, the online DTSE method estimates the instantaneous stiffness mainly through adaptively building a fuzzy segment with the latest measurements, constructing several strict bounding lines of the segment and calculating the slope of the strict bounding lines, which significantly improves the calculation efficiency and accuracy for the instantaneous stiffness estimation. The results of both computational simulation and real-time hybrid simulation show that：（1） the online DTSE method has high calculation efficiency, of which the relatively short computation time will not interrupt RTHS; and（2） the online DTSE method provides better estimation for the instantaneous stiffness, compared with other existing estimation methods. Due to the quick and accurate estimation of instantaneous stiffness, the online DTSE method therefore provides a promising technique to correct restoring forces in RTHS.

Time-varying nonlinear dynamics of a deploying piezoelectric laminated composite plate under aerodynamic force

Using Reddy’s high-order shear theory for laminated plates and Hamilton’s principle, a nonlinear partial differential equation for the dynamics of a deploying cantilevered piezoelectric laminated composite plate, under the combined action of aerodynamic load and piezoelectric excitation, is introduced. Two-degree of freedom(DOF)nonlinear dynamic models for the time-varying coefficients describing the transverse vibration of the deploying laminate under the combined actions of a first-order aerodynamic force and piezoelectric excitation were obtained by selecting a suitable time-dependent modal function satisfying the displacement boundary conditions and applying second-order discretization using the Galerkin method. Using a numerical method, the time history curves of the deploying laminate were obtained, and its nonlinear dynamic characteristics,including extension speed and different piezoelectric excitations, were studied. The results suggest that the piezoelectric excitation has a clear effect on the change of the nonlinear dynamic characteristics of such piezoelectric laminated composite plates. The nonlinear vibration of the deploying cantilevered laminate can be effectively suppressed by choosing a suitable voltage and polarity.

Distributed Dynamic Load in Structural Dynamics by the Impulse-Based Force Estimation Algorithm

This paper proposes a novel approach for identifying distributed dynamic loads in the time domain.Using polynomial andmodal analysis,the load is transformed intomodal space for coefficient identification.This allows the distributed dynamic load with a two-dimensional form in terms of time and space to be simultaneously identified in the form of modal force,thereby achieving dimensionality reduction.The Impulse-based Force Estimation Algorithm is proposed to identify dynamic loads in the time domain.Firstly,the algorithm establishes a recursion scheme based on convolution integral,enabling it to identify loads with a long history and rapidly changing forms over time.Secondly,the algorithm introduces moving mean and polynomial fitting to detrend,enhancing its applicability in load estimation.The aforementioned methodology successfully accomplishes the reconstruction of distributed,instead of centralized,dynamic loads on the continuum in the time domain by utilizing acceleration response.To validate the effectiveness of the method,computational and experimental verification were conducted.

Solution and Analysis of Chatter Stability for End Milling in the Time-domain

In this paper, the instantaneous undeformed chip thickness is modeled to include the dynamic modulation caused by the tool vibration while the dynamic regenerative effects are taken into account. The numerical method is used to solve the differential equations goveming the dynamics of the milling system. Several chatter detection criteria are applied synthetically to the simulated signals and the stability diagram is obtained in time-domain. The simulation results in time-domain show a good agreement with the analytical prediction, which is validated by the cutting experiments. By simulating the chatter stability lobes in the time-domain and analyzing the influences of different spindle speeds on the vibration amplitudes of the tool under a Fixed chip-load condition, conclusions could be drawn as follows： In rough milling, higher machining efficiency can be achieved by selecting a spindle speed corresponding to the axial depth of cut in accordance with the simulated chatter stability lobes, and in Fmish milling, lower surface roughness can be achieved by selecting a spindle speed well beyond the resonant frequency of machining system.

Characteristics of the Function of Ice Force on Vertical Cylindrical Piles

A lot of tests on ice forces on vertical cylindrical piles are conducted in the ice basin of ice laboratory in Tianjin University to identify the characteristics of ice forces on fixed platforms in the Bohai Gulf. A function of ice forces is simplified on basis of test data, and the characteristics of the ice forces including the amplitude of the force and the breaking frequency of the ice sheet is detailed by use of the Fast-Fourier-Transform method, The results show that the ice breaking frequency presents a linear relationship with the ratio of ice moving velocity to ice thickness at low velocities. At high velocities, the frequency remains constant with the increase of the ratio of ice moving velocity to ice thickness. These conclusions are compared those published in literature.

Spatio-temporal Variations in Plantation Forests'Disturbance and Recovery of Northern Guangdong Province Using Yearly Landsat Time Series Observations(1986-2015)

Forest disturbance plays a vital role in modulating carbon storage,biodiversity and climate change.Yearly Landsat imagery from 1986 to 2015 of a typical plantation region in the northern Guangdong province of southern China was used as a case study.A Landsat time series stack(LTSS) was fed to the vegetation change tracker model(VCT) to map long-term changes in plantation forests' disturbance and recovery,followed by an intensive validation and a continuous 27-yr change analysis on disturbance locations,magnitudes and rates of plantations' disturbance and recovery.And the validation results of the disturbance year maps derived from five randomly identified sample plots with 25 km^2 located at the four corners and the center of the scene showed the majority of the spatial agreement measures ranged from 60% to 83%.A confusion matrix summary of the accuracy measures for all four validation sites in Fogang County showed that the disturbance year maps had an overall accuracy estimate of 71.70%.Forest disturbance rates' change trend was characterized by a decline first,followed by an increase,then giving way to a decline again.An undulated and gentle decreasing trend of disturbance rates from the highest value of 3.95% to the lowest value of 0.76% occurred between 1988 and 2001,disturbance rate of 4.51% in 1994 was a notable anomaly,while after 2001 there was a sharp ascending change,forest disturbance rate spiked in 2007(5.84%).After that,there was a significant decreasing trend up to the lowest value of 1.96% in 2011 and a slight ascending trend from 2011 to 2015(2.59%).Two obvious spikes in post-disturbance recovery rates occurred in 1995(0.26%) and 2008(0.41%).Overall,forest recovery rates were lower than forest disturbance rates.Moreover,forest disturbance and recovery detection based on VCT and the Landsat-based detections of trends in disturbance and recovery(LandT rendr) algorithms in Fogang County have been conducted,with LandT rendr finding mostly much more disturbance than VCT.Overall,disturbances and recoveries in northern Guangdong were triggered mostly by timber needs,policies and decisions of the local governments.This study highlights that a better understanding about plantations' changes would provide a critical foundation for local forest management decisions in the southern China.

Derivation of energy-based base shear force coefficient considering hysteretic behavior and P-delta effects

A modified energy-balance equation accounting for P-delta effects and hysteretic behavior of reinforced concrete members is derived. Reduced hysteretic properties of structural components due to combined stiffness and strength degradation and pinching effects, and hysteretic damping are taken into account in a simple manner by utilizing plastic energy and seismic input energy modification factors. Having a pre-selected yield mechanism, energy balance of structure in inelastic range is considered. P-delta effects are included in derived equation by adding the external work of gravity loads to the work of equivalent inertia forces and equating the total external work to the modified plastic energy. Earthquake energy input to multi degree of freedom（MDOF） system is approximated by using the modal energy-decomposition. Energybased base shear coefficients are verified by means of both pushover analysis and nonlinear time history（NLTH） analysis of several RC frames having different number of stories. NLTH analyses of frames are performed by using the time histories of ten scaled ground motions compatible with elastic design acceleration spectrum and fulfilling duration/amplitude related requirements of Turkish Seismic Design Code. The observed correlation between energy-based base shear force coefficients and the average base shear force coefficients of NLTH analyses provides a reasonable confidence in estimation of nonlinear base shear force capacity of frames by using the derived equation.

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.

Constraining Forces Causing the Meissner Effect

As shown in former papers, the nonadiabatic Heisenberg model presents a novel mechanism of Cooper pair formation which is not the result of an attractive electron-electron interaction but can be described in terms of quantum mechanical constraining forces. This mechanism operates in narrow, roughly half-filled superconducting bands of special symmetry and is evidently responsible for the formation of Cooper pairs in all superconductors. Here we consider this new mechanism within an outer magnetic field. We show that in the magnetic field the constraining forces produce Cooper pairs of non-vanishing total momentum with the consequence that an electric current flows within the superconductor. This current satisfies the London equations and, consequently, leads to the Meissner effect. This theoretical result is confirmed by the experimental observation that all superconductors, whether conventional or unconventional, exhibit the Meissner effect.

Introducing driving-force information increases the predictability of the North Atlantic Oscillation

The North Atlantic Oscillation(NAO)is the most prominent mode of atmospheric variability in the Northern Hemisphere.Because of the close relationship between the NAO and regional climate in Eurasia,North Atlantic,and North America,improving the prediction skill for the NAO has attracted much attention.Previous studies that focused on the predictability of the NAO were often based upon simulations by climate models.In this study,the authors took advantage of Slow Feature Analysis to extract information on the driving forces from daily NAO index and introduced it into phase-space reconstruction.By computing the largest Lyapunov exponent,the authors found that the predictability of daily NAO index shows a significant increase when its driving force signal is considered.Furthermore,the authors conducted a short-term prediction for the NAO by using a global prediction model for chaotic time series that incorporated the driving-force information.Results showed that the prediction skill for the NAO can be largely increased.In addition,results from wavelet analysis suggested that the driving-force signal of the NAO is associated with three basic drivers:the annual cycle(1.02 yr),the quasi-biennial oscillation(QBO)(2.44 yr);and the solar cycle(11.6 yr),which indicates the critical roles of the QBO and solar activities in the predictability of the NAO.

Balance and Sharing:Women's Childcare Time and Family's Help

It is of crucial importance for professional women to strike a balance between childcare and work.Help from family can effectively reduce women's time spent on childcare.Based on relevant survey,this paper successively analyzes the time of mother,father and grandparents invested in childcare and explores how women are supported by their family in this duty.Infant and childcare can be as time-consuming as a full-time job.Mothers have always played a primary role in infant and childcare,while grandparents,offering a helping hand to effectively alleviate the mother's workload,can play an alternative role,which is of great significance.This is particularly true in early childhood,when more than 40% of Chinese children are under the care of grandparents,with relatively limited participation of their fathers.Childcare gap between mothers and fathers is even larger in rural China.It is quite common for a family to turn to nursery services when their child are three years old to significantly alleviate the mother's childcare burden.When it comes to the design of relevant public policies and projects,consideration should be given to the role of each family member in taking care of infants and children in different growth stages to explore more options for childcare.More specifically,in addition to motherhood,grandparents' support should be valued,and fatherhood should be enhanced.

Optimization of Crosswalk Width Based on Bi-Directional Pedestrian Crossing Time at Signalized Intersections

The effects of the interactions between bi-directional pedestrians on the crossing time and the crosswalk width are studied. Firstly,the crossing process of bi-directional pedestrians is analyzed.The total crosswalk time is divided into a discharge time and a crossing time. The interactions between bi-directional pedestrians are quantified with the drag force theory. Then,a model is developed to study the crossing time based on the kinetic energy theory and momentum theory. Subsequently,the related parameters of the proposed model are calibrated with observed information. The relationships among crosswalk width,signal time,pedestrian volume and level of service are simulated with the proposed model. The results are verified and compared with other models. The proposed model has an absolute value of relative error of 9. 38%,which is smaller than that of the Alhajyaseen model（ 15. 26%） and Highway Capacity Manual（ HCM） model（ 12. 42%）. Finally,suggested crosswalk widths at different conditions are successfully estimated with the proposed crossing time model.

Adaptive Regression for Nonlinear Interrupted Time Series Analyses with Application to Birth Defects in Children of Vietnam War Veterans

The purpose of this article is to provide an overview of adaptive regression modeling and demonstrate its use in conducting nonlinear analyses of interrupted time series (ITS) data. Adaptive regression modeling is based on heuristic search over alternative models for data controlled by likelihood-cross validation (LCV) scores with larger scores indicating better models. Extended linear mixed models are used for correlated data like ITS data. Power transforms of predictor variables are used to account for nonlinearity. The use of adaptive regression modeling for assessing ITS effects is demonstrated using data on annual proportions of major birth defects in children fathered by male Air Force veterans of the Vietnam War over a 59-year period. The interruption for this ITS is conception after versus before the start of a participant’s first tour in the Vietnam War. Whether the ITS effect is related to dioxin exposure is also addressed. Dioxin is a highly toxic contaminant of the herbicide Agent Orange used in the Vietnam War. The core findings of the reported analyses are that a substantial adverse ITS interruption effect is identified and that this adverse effect can reasonably be attributed to participants having a high dioxin exposure level. Moreover, these results indicate that adaptive regression modeling can identify nonlinear ITS effects in general situations that can lead to consequential insights into nonlinear relationships over time, possibly varying with other available predictors.

Exploratory Study on the Simulated Police Force Allocation of Shopping Mall Emergency Based on AnyLogic Platform

Due to the rapid development of society,public places,especially large shopping malls,are relatively frequent places for emergencies.Such emergencies not only seriously affect public security and property,but also bring great psychological pressure to citizens.Therefore,this study is of great significance for the exploration and study of public place emergencies.The research object of this study is the public shopping mall.Based on the AnyLogic simulation platform and guided by the relevant principles of social force model,this study utilize the pedestrian storehouse in the platform as the core module to build the simulation environment,and attempts to simulate the police force restraining effect on the overall event and the perpetrators after the occur of emergent incident under different police force allocations.In order to ensure the accuracy of the experimental data,the research team conducted field survey to estimate the average flow of people and the general data of the security personnel in shopping malls,also estimated the rest rain and capture time after repeated experiments.The results indicate that increasing additional police force outside the shopping malls and pre-organizing reasonable patrol routes can obviously facilitate police officers to restrain perpetrators.Meanwhile,it is also clear that the AnyLogic platform can effectively simulate pedestrian movement and interaction behaviour in emergencies.

Time-delay damping theory

In this paper,existing damping theories are briefly reviewed.On the basis of the existing damping theories,a new kind of damping theory,i.e.,the time-delay damping theory,is developed.In the time-delay damping theory,the damping force is considered to be directly proportional to the increment of displacement.The response analysis of an SDOF time-delay damping system is carried out,and the methods for obtaining the solution for a time-delay damping system in the time domain as well as the frequency domain are given.The comparison between results from different damping theories shows that the time-delay damping theory is both reasonable and convenient.

Numerical analysis of electromagnetic force field through the use of two examples

In modern processing of conducting materials, such as steel,the time-varying electromagnetic field plays a key role in obtaining the desired microstructure or eliminating solidification defects such as porosity and segregation in cast billets. Up to now,few studies on the induced electromagnetic force （also called the Lorentz force） field in liquid metal have been reported. Compared with the magnetic field, the induced force field is the real and only direct cause for flow control. The electromagnetic force is comprised of two components. One is time-independent and the other is time- dependent. The time-dependent component varies with time in both amplitude and direction. When it reaches the extreme value,it can be one dozen times larger than the time-independent component. In this paper, a new method to quantitatively describe the induced electromagnetic force in liquid metal under a harmonic electromagnetic field,including both its time- independent and dependent components, was proposed based on the formula derivation from the data of amplitude and phase angle. Through this method ,the features of the time-dependent component were discussed, including the directions of rotation and the long axis. As a result, the force pattern was described. With two example calculations, the method was explained in detail. The results of both examples show that the force field in liquid metal can be divided into several regions with different force features. Example 1 shows the effect of coil position on the evolution of the force field pattern in liquid metal. Example 2 is a kind of stirring by the travelling magnetic field ,whose results present the sub-structures in metal and show that most of them have almost the same rotating direction.