Revisiting Effect of Ocean Diapycnal Mixing on Atlantic Meridional Overturning Circulation Recovery in a Freshwater Perturbation Simulation

The effects of ocean density vertical stratification and related ocean mixing on the transient response of the Atlantic meridional overturning circulation （AMOC） are examined in a freshwater perturbation simulation using the Bergen Climate Model （BCM）. The results presented here are based on the model outputs of a previous freshwater experiment： a 300-year control integration （CTRL）, a freshwater integration （FW1） which started after 100 years of running the CTRL with an artificially and continuously threefold increase in the freshwater flux to the Greenland-Iceland-Norwegian （GIN） Seas and the Arctic Ocean throughout the following 150-year simulation. In FW1, the transient response of the AMOC exhibits an initial decreasing of about 6 Sv （1 Sv=106 m3 s^-1） over the first 50-year integration and followed a gradual recovery during the last 100-year integration. Our results show that the vertical density stratification as the crucial property of the interior ocean plays an important role for the transient responses of AMOC by regulating the convective and diapycnal mixings under the enhanced freshwater input to northern high latitudes in BCM in which the ocean diapycnal mixing is stratification-dependent. The possible mechanism is also investigated in this paper.

Mixing of two different electrolyte solutions in electromagnetic rectangular mixers

This study proposes a new electromagnetic rectangular mixer, and numerically examines the mixing characteristics of two different electrolyte solutions in the device under a uniform magnetic field. The mixer consists of a conduit with electrodes equipped on its top and bottom walls. The difference in the electric potentials applied to the sets of electrodes induces the current. The combination of the induced current and magnetic field yields Lorentz force, resulting in the fluid motion for pumping and mixing of the two different fluids. The numerical simulation is carried out with the use of commercial software CFX. The present numerical model is validated by an existing numerical work. The effect of different variables on mixing efficiency is investigated in many different cases with two different heights of the duct and various input voltages of the electrodes. The current simulation results indicate that the mixing performance can be enhanced by using multiple sets of electrodes and applying higher input voltages（absolute values） to the electrodes.

Mass transport in a highly immiscible alloy on extended shear deformation

Forced mixing to a single-phase or supersaturated solid solution(SSS)and its prerequisite microstructure evolution in immiscible systems has been a focus of research for fundamental science and practical applications.Controlling the formation of SSS by shear deformation could enable a material design beyond conventional equilibrium microstructure in immiscible systems.Here,a highly immiscible Cu-50 at.%Cr binary alloy(mixing enthalpy of∼20 kJ mol^(−1))was employed to investigate the microstructure evolution and localized tendencies of SSS during severe shear deformation.Our results demonstrate the dislocation mediated microstructural refinement process in each phase of the binary alloy and the mechanisms associated with localized solute supersaturation as a function of shear strain.Pronounced grain refinement in the softer Cu phase occurs owing to the strain localization driving the preferential dynamic recrystallization.The grain refinement of the Cr phase,however,is enabled by the progressive evolution of grain lamination,splitting,and fragmentation as a function of shear strain.The solute supersaturation is found to be strongly dependent on the local environments that affect the dislocation activity,including the level of microstructure refinement,the interfacial orientation relationship,the mechanical incompatibility,and the localized preferential phase oxidation.Ab initio simulations confirm that it is more favorable to oxidize Cr than Cu at incoherent Cu/Cr interfaces,limiting the mass transport on an incoherent boundary.Our results unveil the mechanism underpinning the non-equilibrium mass transport in immiscible systems upon severe deformation that can be applied to produce immiscible alloys with superior mechanical properties.