The quantificational and normative design is the precondition of improving the design of copper staves for blast furnaces. Based on a 3-dimensional temperature field calculation model, from the view point of heat tran...The quantificational and normative design is the precondition of improving the design of copper staves for blast furnaces. Based on a 3-dimensional temperature field calculation model, from the view point of heat transfer and long campaigns note with the core of forming accretion, the forming-accretion-ability （FAA） and the rib hot surface maximum temperature difference （ATmax） as quantificational indexes to direct and evaluate the design of copper staves for blast furnaces were presented. The application of the two indexes in design essentially embodies the new long campaigns in the stage of design. With the application of the two indexes, good results can be obtained. Firstly, it was suggested that the rib height of a copper stave can be reduced to 15 mm, which is a new method and theory for the reduction of copper staves. Secondly, the influence of insert on FAA and ATmax, is decided by the volume of insert. According to this, the principle of design for the hot surface geometry of copper staves was put forward that the ratio of the rib hot surface to the copper stave hot surface （abbreviated as the ratio of rib to stave） must be maintained in the range of 45% to 55%; for the present copper stave with a 35-40 mm thick rib, the ratio of rib to stave in the range of 50% to 55% can optimize the design of copper staves; for the copper stave with a smaller rib thickness, for example 15 ram, the ratio of rib to stave in the range of 45% to 50% can optimize the design of copper staves. It can be summarized that the thicker the rib thickness, the larger is the ratio of rib to stave. 2008 University of Science and Technology Beijing. All rights reserved.展开更多
The long time practice of observational research on earthquake prediction has shown that the information on shortterm and imminent earthquake precursors can hardly be detected, but it is very important for practical ...The long time practice of observational research on earthquake prediction has shown that the information on shortterm and imminent earthquake precursors can hardly be detected, but it is very important for practical and effective earthquake prediction. The result of analysis and study in this paper has shown that the anomaly of quasi static atmospheric electric field may be a kind of reliable information on short term and imminent earthquake precursors.On such a basis, the 20 years′ continuous and reliable data of atmospheric electric field observed at the Baijiatuan seismic station are used to study the correlation between the anomalies in seismic activity and relative quiet periods bear on the occurrence of near earthquakes within 200 km range around Beijing after the Tangshan earthquake. The observational results recently reported before hand in written form and earthquakes that actually occurred in near field in corresponding time periods are compared and analyzed. The efficacy of these written prediction opinions about near earthquakes in the recent 10 years is tested. From the test results, the brilliant prospect that the anomaly of quasi static atmospheric electric field may really become a reliable mark for making short term and imminent earthquake predictions is discussed. Besides, as a preliminary step, some judgment indexes for predicting earthquakes by use of the observational data of atmospheric electric field before earthquakes are put forward. In the last part, it is pointed out that it would be possible to obtain more believable judgment indexes for determining the three elements of near earthquakes before greater earthquakes ( M S5) only if a relatively reasonable station network (2～4 stations every 10 000 km 2) is deployed and further investigation is made.展开更多
基金the National Natural Science Foundation of China(No.60672145).
文摘The quantificational and normative design is the precondition of improving the design of copper staves for blast furnaces. Based on a 3-dimensional temperature field calculation model, from the view point of heat transfer and long campaigns note with the core of forming accretion, the forming-accretion-ability （FAA） and the rib hot surface maximum temperature difference （ATmax） as quantificational indexes to direct and evaluate the design of copper staves for blast furnaces were presented. The application of the two indexes in design essentially embodies the new long campaigns in the stage of design. With the application of the two indexes, good results can be obtained. Firstly, it was suggested that the rib height of a copper stave can be reduced to 15 mm, which is a new method and theory for the reduction of copper staves. Secondly, the influence of insert on FAA and ATmax, is decided by the volume of insert. According to this, the principle of design for the hot surface geometry of copper staves was put forward that the ratio of the rib hot surface to the copper stave hot surface （abbreviated as the ratio of rib to stave） must be maintained in the range of 45% to 55%; for the present copper stave with a 35-40 mm thick rib, the ratio of rib to stave in the range of 50% to 55% can optimize the design of copper staves; for the copper stave with a smaller rib thickness, for example 15 ram, the ratio of rib to stave in the range of 45% to 50% can optimize the design of copper staves. It can be summarized that the thicker the rib thickness, the larger is the ratio of rib to stave. 2008 University of Science and Technology Beijing. All rights reserved.
文摘The long time practice of observational research on earthquake prediction has shown that the information on shortterm and imminent earthquake precursors can hardly be detected, but it is very important for practical and effective earthquake prediction. The result of analysis and study in this paper has shown that the anomaly of quasi static atmospheric electric field may be a kind of reliable information on short term and imminent earthquake precursors.On such a basis, the 20 years′ continuous and reliable data of atmospheric electric field observed at the Baijiatuan seismic station are used to study the correlation between the anomalies in seismic activity and relative quiet periods bear on the occurrence of near earthquakes within 200 km range around Beijing after the Tangshan earthquake. The observational results recently reported before hand in written form and earthquakes that actually occurred in near field in corresponding time periods are compared and analyzed. The efficacy of these written prediction opinions about near earthquakes in the recent 10 years is tested. From the test results, the brilliant prospect that the anomaly of quasi static atmospheric electric field may really become a reliable mark for making short term and imminent earthquake predictions is discussed. Besides, as a preliminary step, some judgment indexes for predicting earthquakes by use of the observational data of atmospheric electric field before earthquakes are put forward. In the last part, it is pointed out that it would be possible to obtain more believable judgment indexes for determining the three elements of near earthquakes before greater earthquakes ( M S5) only if a relatively reasonable station network (2～4 stations every 10 000 km 2) is deployed and further investigation is made.
