Experimental Study on Formation Conditions of Ammoniojarosite and Its Environmental Significance

Formation conditions of ammoniojarosite in system Fe2（SO4）3-（NH4）2SO4-H2O are investigated in this paper. The results show that ammoniojarosite can be formed rapidly under normal temperature and pressure by controlling suitable pH value and Fe2（SO4）3 and （NH4）2SO4 concentrations. The pH value, temperature and concentration of Fe2（SO4）3 medium are key factors influencing the formation of ammoniojarosite. Under normal temperature, precipitation of ammoniojarosite can be seen within 24 hours at pH values between 2.6-3.1, and a great quantity of ammoniojarosite is formed within 48 hours. At about 90℃, the pH value range forming ammoniojarosite extends to 1.2-3.1, and within this range the rise of pH value is advantageous to the formation of ammoniojarosite and high Fe2（SO4）3 concentration is also advantageous. Relative pure ammoniojarosite is synthesized under high Fe2（SO4）3 concentration （≥0.05 M） and ammoniojarosite containing melanterite and colloid amorphous hydroxide vitriol iron is formed at low Fe2（SO4）3 concentration. The deposition process of ammoniojarosite can be used to harness wastewater from mines and other industries and remove S, Fe and other toxic and harmful elements, such as As, Cr, Hg, Pb in water. Rapid formation of ammoniojarosite and other jarosite analogs under normal temperature and pressure has a good potential prospect for harnessing acid wastewater by means of precipitation of jarosite and its analogs.

Geological Conditions and Prospect Forecast of Shale Gas Formation in Qiangtang Basin, Qinghai-Tibet Plateau

The presence of shale gas has been confirmed in almost every marine shale distribution area in North America.Formation conditions of shale gas in China are the most favorable for marine,organic-rich shale as well.But there has been little research focusing on shale gas in Qiangtang Basin,Qinghai-Tibet Plateau,where a lot of Mesozoic marine shale formations developed.Based on the survey results of petroleum geology and comprehensive test analysis data for Qinghai-Tibet Plateau,for the first time,this paper discusses characteristics of sedimentary development,thickness distribution,geochemistry,reservoir and burial depth of organic-rich shale,and geological conditions for shale gas formation in Qiangtang Basin.There are four sets of marine shale strata in Qiangtang Basin including Upper Triassic Xiaochaka Formation （T3x）,Middle Jurassic Buqu Formation （J2b）,Xiali Formation （J2x） and Upper Jurassic Suowa Formation （J3s）,the sedimentary types of which are mainly bathyal-basin facies,open platform-platform margin slope facies,lagoon and tidal-fiat facies,as well as delta facies.By comparing it with the indicators of gas shale in the main U.S.basins,it was found that the four marine shale formations in Qiangtang Basin constitute a multi-layer distribution of organic-rich shale,featuring a high degree of thickness and low abundance of organic matter,high thermal evolution maturity,many kinds of brittle minerals,an equivalent content of quartz and clay minerals,a high content of feldspar and low porosity,which provide basic conditions for an accumulation of shale gas resources.Xiaochaka Formation shale is widely distributed,with big thickness and the best gas generating indicators.It is the main gas source layer.Xiali Formation shale is of intermediate thickness and coverage area,with relatively good gas generating indicators and moderate gas formation potential.Buqu Formation shale and Suowa Formation shale are of relatively large thickness,and covering a small area,with poor gas generating indicators,and limited gas formation potential.The shale gas geological resources and technically recoverable resources were estimated by using geologic analogy method,and the prospective areas and potentially favorable areas for Mesozoic marine shale gas in Qiangtang Basin are forecast and analyzed.It is relatively favorable in a tectonic setting and indication of oil and gas,shale maturity,sedimentary thickness and gypsum-salt beds,and in terms of mineral association for shale gas accumulation.But the challenge lies in overcoming the harsh natural conditions which contributes to great difficulties in ground engineering and exploration,and high exploration costs.

Spectroscopic Features and Formation Conditions of Sphalerite in the Lead-Zinc Deposit, Guangdong,China

Electron paramagnetic resonance spectra, absorption spectra, cathodoluminescence spectra and infrared spectra of sphalerite from the Lechang remoulded sedimentary lead-zinc deposit have been studied so as to provide microscopic evidence for the formation conditions and mineralization stages of the deposit as well as the geochemical processes of mineralization. On the basis of thermodynamic calculations, the stable fields of sphalerite from different mineralization stages were determined and are shown in logfs_2-logfo_2 diagrams; furthermore. the physico-chemical conditions of mineralization and the properties of mineralization solutions are discussed so that reliability of the genetic information provided by the spectroscopy of sphalerite may also be verified. It is suggested that the temperature and pH value of the mineralization system decrease, and so do the fugacities of O_2, S_2, H_2. and H_2S and the activities of HS^- and SO_4^(2-) from the early to late stages of minerahzation.

CONDITIONS FOR INCIPIENT CAVITATION FORMATION

The growth, equilibrium and stabilization of free gas nucleus are analyzed. It is shown that the cavitation results from growth of free gas nucleus to critical radius and conditions of cavitation have been derived.

Conditions for the Formation of Oil and Gas Pools in Tertiary Volcanics in the Western Part of the Huimin Sag, Shandong and Their Distribution

Conditions for the Formation of oil and gas pools in Tertiary volcanics in the western part of the Huimin sag, Shandong and then (?)stribution have been studied based on the geological, seismic and well-logging information. In this paper, the types and lithofacies of the volcanic rocks in the western part of the Huimin sag are described; the relationship between rocks and electrical properties, the seismic reflection structures, the development and distribution of the volcanic rocks are expounded; and the fourfold role of the volcanic activities in the formation of the oil and gas pools is also dealt with. It is considered by the authors that the volcanic activities were not destructive to the formation of oil and gas pools but a factor favourable to the accumulation of organic matters and their conversion to hydrocarbon. The volcanic rocks might have served as reservoir rocks and cap rocks, or as a synsedimentary anticline. The prerequisites and important factors for the formation of oil and gas pools and their distribution are pointed out in the paper.

Formation of CaO-TiO_2-MgO-Al_2O_3 dual phase inclusion in Ti stabilized stainless steel

The formation of CaO-TiO2-MgO-Al2O3 dual phase inclusion in 321 stainless steel was investigated in the laboratory. The result indicated that the condition for the formation of CaO-TiO2-MgO-Al2O3 in 321 steel is [Ca]〉0.001wt%, [Ti]〉0.1wt%, and [A1]〉0.01wt%. The mechanism is the following： Al2O3 inclusion turns into CaO-Al2O3 after Ca-Si wire is fed into the molten steel; [Mg] is then obtained by reducing MgO in slag or crucible wall by [Al] and [Ti]; finally CaO-Al2O3 inclusion is changed into CaO-TiO2-MgO-Al2O3 by the reaction with [Mg], [Ti], and [O] in the molten steel simultaneously.

A statistical method for assessment of the existing correlations of hydrate forming conditions

Hydrate formation in the oil and gas industries has been a serious problem for a long time. It may cause many difficulties for instance in gas pipelines blockages. In order to determine the hydrate forming condition, gas gravity method has been used. Several correlations have been proposed based on gas gravity method. Checking the accuracy of the applied correlations is important. In this paper, the leverage approach is used for this purpose. Leverage approach is a statistical method for detection outliers which identifies the applicability domain （AD） of hydrate data predicting correlations and the quality of the existing data. Moreover, the Williams plot is sketched, which is a graphical depiction for determination of the doubtful points. The obtained results showed the existing correlations are all statistically correct and valid to predict hydrate formation temperature, just one data point is out of the applicability domains, and none of the experimental data can be chosen as outliers.

Effect of activated sludge treatment on the formation of N–nitrosamines under different chloramination conditions

Municipal wastewater discharge is considered as one of the main sources of N-nitrosamine precursors which can impact the qualities of downstream source waters and reclaimed wastewaters for potable reuse. N –Nitrosamine precursors can be removed to various degrees during biological wastewater treatment(e.g., the activated sludge(AS) process). So far, little is known about the impact of the AS process on N-nitrosamine formation under practical disinfection condition(e.g., uniform formation condition(UFC)). In this study, N-nitrosamine UFC from selected model compounds, sewage components(i.e., blackwaters and greywaters) and sewage samples were comprehensively investigated during batch AS treatment tests. N –Nitrosodimethylamine(NDMA) formation from the tested precursor compounds(i.e., trimethylamine(TMA) and sumatriptan(SMTR)) under UFC chloramination decreased mostly after 6 or 24 hr treatment with different types of AS(i.e., domestic rural AS, domestic urban AS, and textile AS), and the reductions in NDMA UFC were comparable to their NDMA formation potential(FP) reductions. In urine and feces blackwaters, NDMA UFC increased after 6 or 24 hr treatment with the domestic(i.e., rural and urban) AS, while NDMA FP decreased substantially. The increases in NDMA UFC after AS treatment was presumably attributed to the removal of bulk organic matters(e.g., dissolved organic carbon(DOC)) which favored NDMA formation under UFC. On the other hand, in laundry greywaters having relatively abundant DOC, N-nitrosamine UFC was less affected by DOC removal before or after AS treatment, but decreased to similar degrees with N-nitrosamine FP. In sewage samples collected from wastewater treatment plants, N-nitrosamines UFC tended to increase or remain constant during AS treatment, despite the decreases in their FPs. These results suggest that biological wastewater treatment(e.g., the AS process) may not effectively reduce N-nitrosamine formation(e.g., measured under UFC) partially because the concurrent removal of bulk organic matters(e.g., DOC) favored N-nitrosamine formation in s econdary effluents.

Sapphirine in the high-grade quartzofeldspathic gneiss of the Larsemann Hills,East Antarctica

Study of sapphirine and related mineral association in the high-grade region of the Larsemann Hills, East Antarctica, shows that sapphirine of the area is characterized by its magnesio-, iron- and aluminum-rich, but silica-poor feature, and the obvious intra- and intergrain changes in compositions. The change is mainly mani- fested as the Tschermark substitution （ Mg, Fe） ＋ Si =2A1. In the high-grade meta-morphism and anatexis process the multistage crystallization of minerals occurred and resulted in the complexity of the mineral association, such as the differentiation of leuco-and melano-components. Among them, the mafic-rich minerals formed earlier, and the differentiation of magnesio-and iron-components is responsible for the earlier presence of iron-rich minerals and later crystallization of magnesio-rich minerals, thus the successive associations of multistage occurred. The rock composition is an important but not critical factor to the occurrence of sapphirine. It is the mobilization of components that accounts for the formation of sapphirine. The multistage evolution of mineral association to some degree reflects the changing composition and opening of the setting. It is therefore deduced that the protolith from which sapphirine is derived is not necessarily magnesio-rich pelite. The heterogeneity of sapphirine composition is resulted from the various media, not the PT changes. Sapphirine formed at 840-880℃ ,not the so-called ultrahigh temperature condition（〉 1000℃）. Its formation is related to both the filtration and diffusion processes in high-grade metamor-phism and anatexis.

A Comparative Geochemistry Study of Several Oil Shale-Bearing Intervals in the Paleogene Huadian Formation,Huadian Basin,Northeast China

The Huadian Basin is an oil shale-bearing basin located in northeastern China. Thirteen oil shale layers deposited in this basin, and the characteristics of oil shale are different among these oil shale layers. Based on the core observation and microscope identification, using the organic and inor- ganic data from borehole HD3 and outcrops, the formation conditions of different grade oil shale have been evaluated. Based on measuring oil yield （OY in short） of an oil shale to determine its grade, this paper classifies the oil shale as high grade （OY〉10%）, medium grade （10%〉OY〉5%） and low grade （5%〉OY〉3.5%）. The high grade oil shale is mainly in brown or dark brown, and the bulk density ranges from 1.59 to 1.81 g/cm3. The results of X-ray diffraction indicate the content of carbonate min- erals is 28.0%. The HI （hydrogen index）-Tmax, HI-OI （oxygen index） and S2-TOC （total organic carbon） diagrams indicate the kerogen types are I and II1. The high grade oil shale generally formed in the rela- tively arid paleoclimate, deposited in the brackish water, dysoxic environment, when the bioprodctivity is extremely high, and the information is mainly from the inorganic parameters diagrams of chemical index of alteration （CIA）, Sr/Ba and V/（V＋Ni）. The medium grade oil shale mainly shows grey-black or black-brown color and the bulk density ranges from 1.87 to 2.08 g/cm^3. The average content of carbon- ate minerals is 16.4%, far less than high grade oil shale and the kerogen type is mainly IIm. The inor- ganic parameters diagrams reflect the medium grade oil shale generally formed in the less humid pa- leoclimate, deposited in the brackish water, dysoxic to anoxic environment, when the bioproductivity is medium. The color of low grade oil shale is major in grey-black or dark grey and the bulk density ranges from 2.00 to 2.15 g/cm^3. The average content of carbonate minerals is sharply decreased and the kerogen type is mainly II1. The inorganic parameters diagrams indicate the low grade oil shale gener- ally formed in the relatively humid paleoclimate, deposited in the freshwater to brackish water, anoxic environment, when the bioproductivity is relatively low. Comprehensive study suggest the increasing precipitation caused by a relatively humid paleoclimate resulted in decreasing oxygen concentration and salinity in the bottom water, restrained the salinity stratification, and tended to form the low grade oil shale. The strong evaporation leading to relatively arid paleoclimate resulted in increasing oxygen concentration and salinity in the bottom water, and promoted the salinity stratification. The area with well preservation conditions caused by the relative high sedimentary rate and salinity stratification are favorable to high grade oil shale deposit. In summary, the bioproductivity and the paleoclimate are the main factors controlling the oil shale grade in the Huadian Basin, when the bioproductivity is relatively high and the paleoclimate is relatively arid, it is prone to form the high grade oil shale. However the low grade oil shale developed in the low bioproductivity and relatively humid paleoclimate.