VISUAL OBSERBATION OF HCFC141b GAS HYDRATE FORMATION/DECOMPOSITION PROCESS OUTSIDE OF A TUBE

In order to design a kind of heat exchanger suitable to the indirect-touched gas hydrate cool storage vessel, a visual observation of HCFC141b gas hydrate formation/decomposition process was presented through a self-designed small-scale visualization apparatus of gas hydrate cool storage. Based on the shooted photos and recorded temperatures, the formation/decomposition process of HCFC141b are described, some characteristics are concluded, and some suggestions of designing heat exchanger are indicated according to the specific characteristics of HCFC141b gas hydrate formation/decomposition process.

Formation and transformation of metastable LPSO building blocks clusters in Mg-Gd-Y-Zn-Zr alloys by spinodal decomposition and heterogeneous nucleation

To study the formation and transformation mechanism of long-period stacked ordered(LPSO)structures,a systematic atomic scale analysis was conducted for the structural evolution of long-period stacked ordered(LPSO)structures in the Mg-Gd-Y-Zn-Zr alloy annealed at 300℃~500℃.Various types of metastable LPSO building block clusters were found to exist in alloy structures at different temperatures,which precipitate during the solidification and homogenization process.The stability of Zn/Y clusters is explained by the first principles of density functional theory.The LPSO structure is distinguished by the arrangement of its different Zn/Y enriched LPSO structural units,which comprises local fcc stacking sequences upon a tightly packed plane.The presence of solute atoms causes local lattice distortion,thereby enabling the rearrangement of Mg atoms in the different configurations in the local lattice,and local HCP-FCC transitions occur between Mg and Zn atoms occupying the nearest neighbor positions.This finding indicates that LPSO structures can generate necessary Schockley partial dislocations on specific slip surfaces,providing direct evidence of the transition from 18R to 14H.Growth of the LPSO,devoid of any defects and non-coherent interfaces,was observed separately from other precipitated phases.As a result,the precipitation sequence of LPSO in the solidification stage was as follows:Zn/Ycluster+Mg layers→various metastable LPSO building block clusters→18R/24R LPSO;whereas the precipitation sequence of LPSO during homogenization treatment was observed to be as follows:18R LPSO→various metastable LPSO building block clusters→14H LPSO.Of these,14H LPSO was found to be the most thermodynamically stable structure.

Preparation of fibrous nickel powder by precipitation transformation coupled with thermal decomposition

Fibrous particulate precursor was obtained by precipitation transformation in the ternary solution system of ammonium oxalate, nickel chloride and ammonia. The composition and morphology of precursor were characterized by XRD, SEM, IR and DTA/TGA analyses. The results show that the chemical composition and morphology of precursor precipitates at pH=8.4？8.8 are different from those of precursor precipitates at pH=6.0, and the mechanisms of the thermal decomposition of the precursors are different. The effects of various conditions in the process of thermal decomposition, including precursor morphology, atmosphere, temperature and time on the morphology and dispersion degree of obtained nickel powders were studied in detail. The final product inherits the morphology of precursor when the thermal decomposition is conducted under a weakly reducing atmosphere at temperature range of 400？440 °C for 30 min. Fibrous nickel powder can be produced with good dispersion, and its shape changes from smooth, straight and compact fiber into loose and curved fiber with rough surface.

Use of Electrical Resistance to Detect the Formation and Decomposition of Methane Hydrate

The changes of electrical resistance （R） were studied experimentally in the process of CH4 hydrate formation and decomposition, using temperature and pressure as the auxiliary detecting methods simultaneously. The experiment results show that R increases with hydrate formation and decreases with hydrate decompositon. R is more sensitive to hydrate formation and decompositon than temperature or pressure, which indicates that the detection of R will be an effective means for detecting natural gas hydrate （NGH） quantitatively.

Resistivity in Formation and Decomposition of Natural Gas Hydrate in Porous Medium

A new one-dimensional system for resistivity measurement for natural gas hydrate(NGH)exploitation is designed,which is used to study the formation and decomposition processes of NGH.The experimental results verify the feasibility of the measurement method,especially in monitoring the nucleation and growth of the NGH. Isovolumetric formation experiment of NGH is performed at 2°C and 7.8 MPa.Before the NGH formation,the initial resistivity is measured to be 4-7Ω·m,which declines to the minimum value of 2-3Ω·m when NGH begins to nucleate after the pressure is reduced to 3.3 MPa.As the NGH grows,the resistivity increases to a great extent,and finally it keeps at 11-13Ω·m,indicating the completion of the formation process.The NGH decomposition experiment is then performed.When the outlet pressure decreases,NGH begins to decompose,accordingly,the resistivity declines gradually,and is at 5-9Ω·m when the decomposition process ends,which is slightly higher than the resistivity value before the formation of NGH.The occurrence and distribution uniformity of NGH are determined by the distribution and magnitude of the resistivity measured on an one-dimensional sand-packed model.This study tackles the accurate estimation for the distribution of NGH in porous medium,and provides an experimental basis for further study on NGH exploitation in the future.

Investigation of Al2O3 and Fe2O3 transmission and transformation during the decomposition of phosphogypsum

Phosphogypsum(PG) is a solid waste produced in the phosphate fertilizer industry and is environmentally harmful.The decomposition of PG to recycle calcium and sulfur is a proper way to reutilize PG. Current work aims at enriching the basic theory of coal decomposition process of PG. The emphasis was laid on the exploration of impact of main impurities on the process. On the other hand, according to Reaction Module, Equilib Module, and Phase Diagram Module of FactS age, the simulation computation was done on the systems of pure gypsum mixed with coal,with or without impurities for avoiding other impurities interference. Later, possible reactions in the process were deduced. Additionally, experiments were conducted in a TG-DTA integrated thermal gravimetric analyzer and a tube furnace. The products from the experiments were characterized and analyzed to verify the accuracy of theoretical calculations. The results showed that these impurities can change the decomposition process of PG. For example, aluminum oxide was transformed to calcium sulfoaluminate, while iron oxide was transformed to dicalcium ferrite. Furthermore, the results help to further improve the basic theory of phosphogypsum decomposition.

Effect of microwave on formation/decomposition of natural gas hydrate

Natural gas hydrate (NGH) reservoirs have been considered as a substantial future clean energy re-source and how to recover gas from these reservoirs feasibly and economically is very important. Mi-crowave heating will be taken as a promising method for gas production from gas hydrates for its ad-vantages of fast heat transfer and flexible application. In this work, we investigate the formation /decomposition behavior of natural gas hydrate with different power of microwave (2450MHZ), pre-liminarily analyze the impact of microwave on phase equilibrium of gas hydrate,and make calculation based on van der Waals-Platteeuw model. It is found that microwave of a certain amount of power can reduce the induction time and sub-cooling degree of NGH formation, e.g., 20W microwave power can lead to a decrease of about 3℃ in sub-cooling degree and the shortening of induction time from 4.5 hours to 1.3 hours. Microwave can make rapid NGH decomposition, and water from NGH decomposi-tion accelerates the decomposition of NGH with the decomposition of NGH. Under the same pressure, microwave can increase NGH phase equilibrium temperature. Different dielectric properties of each composition of NGH may cause a distinct difference in temperature in the process of NGH decomposi-tion. Therefore, NGH decomposition by microwave can be affected by many factors.

Kinetics of Levulinic Acid Formation from Glucose Decomposition at High Temperature

Levulinic acid is a kind of new green platform chemical with wide application. The kinetics of levulinic acid formation from glucose decomposition at high temperature was investigated. Glucose containing 1%, 3% or 5% H2SO4 was treated at 170℃ or 190℃. For the various experimental conditions assayed, the time-courses of glucose and glucose degradation products (including 5-hydroxymethylfurfural and levulinic acid) were established. These variables were cor-related with the reaction time based on the equations derived from a pseudo-homogeneous, first-order kinetic model, which provided a satisfactory interpretation of the experimental results. The set of kinetic parameters from regression of experimental data provided useful information for understanding the levulinic acid formation mechanism.

Multi-scale Decomposition of Co-seismic Deformation from High Resolution DEMs:a Case Study of the 2004 Mid-Niigata Earthquake

Decomposing co-seismic deformation is an immediate need for researchers who are interested in earthquake inversion analysis and geo-hazard mapping. However, conventional InSAR or digital elevation models （DEMs） imagery analyses only provide the displacement in the Line-of-Sight （LOS） direction or elevation changes. The 2004 Mid-Niigata earthquake in Japan provides lessons on how to decompose co-seismic deformation from two sets of DEMs. If three adjacent points undergo a rigid-body-translation movement, their co-seismic deformation can be decomposed by solving simultaneous equations. Although this method has been successfully used to discuss tectonic deformations, the algorithm needed improvement and a more rigorous algorithm, including a new definition of nominal plane, DEMs comparability improvement and matrix condition check is provided. Even with these procedures, the obtained decomposed displacement often showed remarkable scatter prompting the use of the moving average method, which was used to determine both tectonic and localized displacement characteristics. A cut-off window and a pair of band-pass windows were selected according to the regional geology and construction activities to ease the tectonic and localized displacement calculations, respectively. The displacement field of the tectonic scale shows two major clusters of large lateral components, and coincidently major visible landslides were found mostly within them. The localized displacement helps to reveal hidden landslides in the target area. As far as the Kizawa hamlet is concerned, the obtained vectors show down-slope movements, which are consistent with the observed traces of dislocations that were found in the Kizawa tunnel and irrigation wells. The method proposed has great potential to be applied to understanding post-earthquake rehabilitation in other areas.

Decomposition Kinetics for Formation of CO_2 Hydrates in Natural Silica Sands

The decomposition kinetics for formation of CO2 hydrates in 90 cm 3wet natural silica sands were studied systematically using the depressurization method at the temperatures ranging from 273.2 to 277.2 K and the pressures from 0.5 to 1.0 MPa.The effects of temperature,pressure,particle diameter,porosity,and salinity of formation water on the decomposition kinetics were investigated.The results show that the dissociation percentage increases as temperature increases or as the initial decomposition pressure decreases.An increase in porosity or a decrease in particle diameter of silica sands accelerates the decomposition.Increasing the salinity of the formation water gives rise to a faster decomposition.However,a combination of the present results with the observations in literature reveals that the effect of the coexisting ionic solute depends on its chemical structure.

Formation of arsenic−copper-containing particles and their sulfation decomposition mechanism in copper smelting flue gas

The heat recovery steam generator(HRSG)of copper smelting generates a large number of arsenic−coppercontaining particles,and the in-situ separation of arsenic and copper is of importance for cutting off environmental risk and realizing resource recovery.The formation of arsenic−copper-containing particles was simulated,the method of in-situ decomposition of arsenic−copper-containing particles by pyrite was proposed,and the decomposition mechanism was confirmed.It was found that particles with high arsenic content were formed in the simulated HRSG,and copper arsenate was liable for the high arsenic content.Pyrite promoted the sulfation of copper,leading to the in-situ decomposition of copper arsenate.In this process,gaseous arsenic was released,and thus the separation of arsenic and copper was realized.

Sea-water-level prediction via combined wavelet decomposition,neuro-fuzzy and neural networks using SLA and wind information

Sea-water-level(SWL)prediction significantly impacts human lives and maritime activities in coastal regions,particularly at offshore locations with shallow water levels.Long-term SWL forecasts,which are conventionally obtained via harmonic analysis,become ineffective when nonperiodic meteorological events predominate.Artificial intelligence combined with other data-processing methods can effectively forecast highly nonlinear and nonstationary inflow patterns by recognizing historical relationships between input and output.These techniques are considerably useful in time-series data predictions.This paper reports the development of a hybrid model to realize accurate multihour SWL forecasting by combining an adaptive neuro-fuzzy inference system(ANFIS)with wavelet decomposition while using sea-level anomaly(SLA)and wind-shear-velocity components as inputs.Numerous wavelet-ANFIS(WANFIS)models have been tested using different inputs to assess their applicability as alternatives to the artificial neural network(ANN),wavelet ANN(WANN),and ANFIS models.Different error definitions have been used to evaluate results,which indicate that integrated wavelet-decomposition and ANFIS models improve the accuracy of SWL prediction and that the inputs of SLA and wind-shear velocity exhibit superior prediction capability compared to conventional SWL-only models.

Relationship between the Standard Enthalpy of Formation and the Ratio of Standard Enthalpy of Formation and Exothermic Denitration Decomposition Peak Temperature of M(NTO)_n

A relationship is established, using the least squares method, between the standard enthalpy of formation and the standard enthalpy of formation divided by the exothermic denitration decomposition peak absolute temperature corresponding to β →0.

Role of different types of water in bentonite clay on hydrate formation and decomposition

The equilibrium and kinetic of hydrate in sediments can be affected by the presence of external components like bentonite with a relatively large surface area.To investigate the hydrate formation and decomposition behaviors in bentonite clay,the experiments of methane hydrate formation and decomposition using the multi-step decomposition method in bentonite with different water contents of 20%,40%and 60%(mass)were carried out.The contents of bound,capillary and gravity water in bentonite clay and their roles during hydrate formation and decomposition were analyzed.In bentonite with water content of 20%(mass),the hydrate formation rate keeps fast during the whole formation process,and the final gas consumption under different initial formation pressures is similar.In bentonite with the water contents of 40%and 60%(mass),the hydrate formation rate declines significantly at the later stage of the hydrate formation.The final gas consumption of bentonite with the water contents of 40%and 60%(mass)is significantly higher than that with the water content of 20%(mass).During the decomposition process,the stable pressure increases with the decrease of the water content.Hydrate mainly forms in free water in bentonite clay.In bentonite clay with the water contents of 20%and 40%(mass),the hydrate forms in capillary water.In bentonite clay with the water content of 60%(mass),the hydrate forms both in capillary water and gravity water.The bound water of dry bentonite clay is about 3.93%(mass)and the content of capillary water ranges from 42.37%to 48.21%(mass)of the dry bentonite clay.

THE EFFECT OF COLD DEFORMATION ON THE KINETICS OF THE SPINODAL DECOMPOSITION OF Cu-9Ni-6Sn-0.3Ce ALLOY

By means of the measurement of mechnical properties and resistivity and X-ray diffraction and transmission microscopy,the effect of cold deformation on the kinetics of spinodal decomposition of Cu-9Ni-6Sn-0.3Ce alloy was studied.The strengthening process of the cold-worked and aged alloy was found to be accelerated.Using the theory of dislocation,the strengthening in cold-worked alloy can be attributed to the acceleration of spinodal process.

Effect of Lanthanum on Nitrification, Phosphorus Transformation and Phenol Decomposition in Red Soil

The effect of La on nitrification, P transformation and phenol decomposition in red soil was studied by incubation and pot culture experiments. La at low concentration has stimulative effect on soil nitrification and P transformation while its high concentration has inhibitory effects, and the inhibition is strengthened with increasing concentration of La. La has strongly inhibitory effect on soil phenol decomposition and the inhibition is strengthened with increasing concentration of La. When the incubation time is prolonged, the inhibitory effect of La on soil nitrification and phenol decomposition tends to decrease.

Thermal decomposition and cobalt species transformation of carbon nanotubes supported cobalt catalyst for Fischer-Tropsch synthesis

The effect of calcination condition on the cobalt species and Fischer-Tropsch synthesis （FTS） was studied. It was found that higher calcination temperature resulted in decreased FTS activities because CNTs were consumed by oxidation in air at temperature higher than 230 ℃. Cobalt species went through transformation from Co304 to metallic Co in Ar by autoreduction at temperature over 500℃. The autoreduction route might be Co3O4→CoO→C0 or Co3O4→Co2C→Co. Reduction at temperature higher than 500 ℃ also resulted in decreased FTS activities due to the methanation of CNTs in hydrogen.

Scheme for Secure Communication via Information Hiding Based on Key Exchange and Decomposition Protocols

This paper considers a decomposition framework as a mechanism for information hiding for secure communication via open network channels. Two varieties of this framework are provided: one is based on Gaussian arithmetic with complex modulus and another on an elliptic curve modular equation. The proposed algorithm is illustrated in a numerical example.

A DECOMPOSITION DEPENDED ON DIRECTIONS FOR NONSINGULAR LINEAR TRANSFORMATION

In this paper. we give a decomposition depending on p(1≤p≤n-2) orthonormaldirections assigned for nonsingular linear transformation F on a n-dimension (n≥3)Euclidean space En, and then prove foal there exist q(q=n-p) quasi-Principaldirections.for F depending on the preceding p orthonormal directions. As applicance ofthe preceding result, we derive that there exist at least two orthonormal principaldirections of strain in arbitrary plane of body which is in homogeneous deformation,and strain energy density is.function of 5 real numbers under arbitrary quasi-principalbase.for the preceding nonsingular linear transformation.

Enhancement Channel Estimation Using Outer-Product Decomposition Algorithm Based on Frequency Transformation

The outer-product decomposition algorithm(OPDA)performs well at blindly identifying system function.However,the direct use of the OPDA in systems using bandpass source will lead to errors.This study proposes an approach to enhance the channel estimation quality of a bandpass source that uses OPDA.This approach performs frequency domain transformation on the received signal and obtains the optimal transformation parameter by minimizing the p-norm of an error matrix.Moreover,the proposed approach extends the application of OPDA from a white source to a bandpass white source or chirp signal.Theoretical formulas and simulation results show that the proposed approach not only reduces the estimation error but also accelerates the algorithm in a bandpass system,thus being highly feasible in practical blind system identification applications.