基于PSS+PXF的ISF高精度振荡器噪声分析模型

提出了一种基于PSS+PXF的ISF的相位噪声模型,用于预测振荡器的相位噪声。该模型相对传统的拉扎维模型考虑了振荡器的非线性时变特性,因此更加精确。通过仿真验证了该模型的有效性,基于PSS+PXF的ISF的相位噪声模型精度相比传统拉扎维模型提升200%以上。

Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review

Compared with traditional plastic forming,ultrasonic vibration plastic forming has the advantages of reducing the forming force and improving the surface quality of the workpiece.This technology has a very broad application prospect in industrial manufactur-ing.Researchers have conducted extensive research on the ultrasonic vibration plastic forming of metals and laid a deep foundation for the development of this field.In this review,metals were classified according to their crystal structures.The effects of ultrasonic vibration on the microstructure of face-centered cubic,body-centered cubic,and hexagonal close-packed metals during plastic forming and the mech-anism underlying ultrasonic vibration forming were reviewed.The main challenges and future research direction of the ultrasonic vibra-tion plastic forming of metals were also discussed.

MPI/OpenMP-Based Parallel Solver for Imprint Forming Simulation

In this research,we present the pure open multi-processing(OpenMP),pure message passing interface(MPI),and hybrid MPI/OpenMP parallel solvers within the dynamic explicit central difference algorithm for the coining process to address the challenge of capturing fine relief features of approximately 50 microns.Achieving such precision demands the utilization of at least 7 million tetrahedron elements,surpassing the capabilities of traditional serial programs previously developed.To mitigate data races when calculating internal forces,intermediate arrays are introduced within the OpenMP directive.This helps ensure proper synchronization and avoid conflicts during parallel execution.Additionally,in the MPI implementation,the coins are partitioned into the desired number of regions.This division allows for efficient distribution of computational tasks across multiple processes.Numerical simulation examples are conducted to compare the three solvers with serial programs,evaluating correctness,acceleration ratio,and parallel efficiency.The results reveal a relative error of approximately 0.3%in forming force among the parallel and serial solvers,while the predicted insufficient material zones align with experimental observations.Additionally,speedup ratio and parallel efficiency are assessed for the coining process simulation.The pureMPI parallel solver achieves a maximum acceleration of 9.5 on a single computer(utilizing 12 cores)and the hybrid solver exhibits a speedup ratio of 136 in a cluster(using 6 compute nodes and 12 cores per compute node),showing the strong scalability of the hybrid MPI/OpenMP programming model.This approach effectively meets the simulation requirements for commemorative coins with intricate relief patterns.

Analysis and Optimization of the Electrohydraulic Forming Process of Sinusoidal Corrugation Tubes

Aluminum alloy thin-walled structures are widely used in the automotive industry due to their advantages related to light weight and crashworthiness.They can be produced at room temperature by the electrohydraulic forming process.In the present study,the influence of the related parameters on the forming quality of a 6063 aluminum alloy sinusoidal corrugation tube has been assessed.In particular,the orthogonal experimental design(OED)and central composite design(CCD)methods have been used.Through the range analysis and variance analysis of the experimental data,the influence degree of wire diameter(WD)and discharge energy(DE)on the forming quality was determined.Multiple regression analysis was performed using the response surface methodology.A prediction model for the attaching-die state coefficient was established accordingly.The following optimal arrangement of parameters was obtained(WD=0.759 mm,DE=2.926 kJ).The attaching-die state coefficient reached the peak value of 0.001.Better optimized wire diameter and discharge energy for a better attaching-die state could be screened by CCD compared with OED.The response surface method in CCD was more suitable for the design and optimization of the considered process parameters.

Method of fabricating artificial rock specimens based on extrusion free forming(EFF)3D printing

Three-dimensional(3D)printing technology has been widely used to create artificial rock samples in rock mechanics.While 3D printing can create complex fractures,the material still lacks sufficient similarity to natural rock.Extrusion free forming(EFF)is a 3D printing technique that uses clay as the printing material and cures the specimens through high-temperature sintering.In this study,we attempted to use the EFF technology to fabricate artificial rock specimens.The results show the physico-mechanical properties of the specimens are significantly affected by the sintering temperature,while the nozzle diameter and layer thickness also have a certain impact.The specimens are primarily composed of SiO_(2),with mineral compositions similar to that of natural rocks.The density,uniaxial compressive strength(UCS),elastic modulus,and tensile strength of the printed specimens fall in the range of 1.65–2.54 g/cm3,16.46–50.49 MPa,2.17–13.35 GPa,and 0.82–17.18 MPa,respectively.It is capable of simulating different types of rocks,especially mudstone,sandstone,limestone,and gneiss.However,the simulation of hard rocks with UCS exceeding 50 MPa still requires validation.

A Hybrid Optimization Approach of Single Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss

We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.

Prediction and Verifcation of Forming Limit Diagrams Based on a Modifed Shear Failure Criterion

The forming limit diagram plays an important role in predicting the forming limit of sheet metals.Previous studies have shown that,the method to construct the forming limit diagram based on instability theory of the original shear failure criterion is efective and simple.The original shear instability criterion can accurately predict the left area of the forming limit diagram but not the right area.In this study,in order to improve the accuracy of the original shear failure criterion,a modifed shear failure criterion was proposed based on in-depth analysis of the original shear failure criterion.The detailed improvement strategies of the shear failure criterion and the complete calculation process are given.Based on the modifed shear failure criterion and diferent constitutive equations,the theoretical forming limit of TRIP780 steel and 5754O aluminum alloy sheet metals are calculated.By comparing the theoretical and experimental results,it is shown that proposed modifed shear failure criterion can predict the right area of forming limit more reasonably than the original shear failure criterion.The efect of the pre-strain and constitutive equation on the forming limits are also analyzed in depth.The modifed shear failure criterion proposed in this study provides an alternative and reliable method to predict forming limit of sheet metals.

Local Buckling-Induced Forming Method to Produce Metal Bellows

A novel buckling-induced forming method is proposed to produce metal bellows.The tube billet is firstly treated by local heating and cooling,and the axial loading is applied on both ends of the tube,then the buckling occurs at the designated position and forms a convolution.In this paper,a forming apparatus is designed and developed to produce both discontinuous and continuous bellows of 304 stainless steel,and their characteristics are discussed respectively.Furthermore,the influences of process parameters and geometric parameters on the final convolution profile are deeply studied based on FEM analysis.The results suggest that the steel bellows fabricated by the presented buckling-induced forming method have a uniform shape and no obvious reduction of wall thickness.Meanwhile,the forming force required in the process is quite small.

Design and analysis of longitudinal–flexural hybrid transducer for ultrasonic peen forming

Ultrasonic peen forming(UPF)is an emerging technology that exhibits great superiority in both its flexible operating modes and the deep residual stress that it produces compared with conventional plastic forming methods.Although ultrasonic transducers with longitudinal vibration have been widely studied,they have seldom been incorporated into UPF devices for machining in confined spaces.To meet the requirements of this type of machining,a sandwich-type piezoelectric transducer with coupled longitudinal-flexural vibrational modes is proposed.The basic structure of the transducer is designed to obtain large vibrational amplitudes in both modes.Experimental results obtained with a prototype device demonstrate the feasibility of the proposed transducer.The measured vibrational amplitude for the working face in the longitudinal vibrational mode is 1.0μm,and electrical matching increases this amplitude by 40%.The flexural vibration characteristics of the same prototype transducer are also tested and are found to be slightly smaller than those of longitudinal mode.The resultant working strokes of the UPF impact pins reach 1.7 mm and 1.2 mm in the longitudinal and flexural modes,respectively.The forming capability of the prototype has been evaluated via 15-min machining on standard 2024-T351 aluminum plates.After UPF,an improved surface morphology with lower surface roughness is obtained.The aluminum plate test piece has an apparent upper deformation with an arc height of 0.64 mm.The measured peak value of the compressive residual stress is around 250 MPa,appearing at a depth of 100μm.The proposed longitudinal-flexural hybrid transducer thus provides a high-performance tool for plate peen forming in confined spaces.

Numerical investigation of film forming characteristics and mass transfer enhancement in horizontal polycondensation kettle

The process of producing high viscosity polyester by transesterification polycondensation needs to adjust the operating conditions and equipment structure of pre-polycondensation kettle and final polycondensation kettle to realize process intensification.In view of this,the fluid volume function method of computational fluid dynamics numerical simulation was used to investigate the film formation and surface renewal characteristics of horizontal polycondensation kettle under different operating conditions,including viscosity,rotating speed and liquid height.The results show that the viscosity and rotating speed were positively correlated with the film area and surface renewal in the pre-polycondensation stage.However,increasing the viscosity by several orders of magnitude in the final polycondensation kettle,the larger the film area and film thickness,but the overall surface renewal of the disk decreased.Therefore,a hexagonal hole disk is designed.By comparison,it is found that the film is more uniform,the surface update frequency is higher,and the power consumption can be reduced by more than 20%.

Recent research and development on forming for large magnesium alloy components with high mechanical properties

The lightweight of high-end equipment relies on high mechanical properties magnesium(Mg) alloy structural components, because it is the best way to improve equipment service performance and reduce energy consumption. This article summarizes the current progress and characteristics of large-scale high-performance Mg alloy components by analyzing the strengthening-toughening mechanisms, characteristics of plastic forming, and the preparation of large high mechanical properties forging blanks. Due to the lack of breakthroughs in the key technologies for forming large-scale Mg alloy components, their uniformity of mechanical properties and consistency are poor, the forming accuracy of components is low, and the production cost is high, which limit their engineering application and restrict the lightweight level of high-end equipment. In view of the above problems, the forming trends and research directions of large-scale and high mechanical properties Mg alloy components are proposed in this paper. It can provide help for the breakthrough of the key technology of large-scale Mg alloy components with high mechanical properties and expand the application of Mg alloy in high-end products.

齿轮精密塑性成形理论技术装备研究与应用

齿轮是传动系统的核心基础件,被广泛应用于机械、汽车、航空航天装备等领域。齿轮传统制造技术为切削加工,其材料利用率低、加工周期长,特别是金属流线切断,损害齿轮性能,无法满足高端装备发展需求。齿轮精密塑性成形制造技术具有节能、节材、高效和优质等特点,是高性能齿轮技术发展方向。阐述了齿轮精密塑性成形理论方法,分析了国内外圆锥直齿轮、圆柱直齿轮和圆柱螺旋/斜齿轮精密成形技术特点;介绍了齿轮精密成形典型装备及产线,总结了齿轮无切削摆辗精密成形和锻造精密成形应用情况。此外,展示了圆锥螺旋齿轮多自由度包络成形和非圆齿轮锻造成形新方法,为高性能齿轮无切削成形制造技术装备研究与应用提供了参考。

装配式混凝土剪力墙结构接缝连接研究进展

装配式剪力墙结构拼装时存在大量的水平接缝和竖向接缝,由于剪力墙的刚度较大,接缝连接处易存在刚度不足引起的损伤集聚问题,成为影响结构整体性和抗震性能的决定性因素。总结了国内外正在发展的预制装配式剪力墙结构水平和竖向接缝的连接形式,并对各类连接形式的构造特点、抗震性能、应用优势和技术瓶颈进行了系统阐述和分析,在此基础上探讨了装配式剪力墙结构接缝连接技术的发展方向。结果表明:目前湿式连接技术已较为成熟且被广泛应用,但仍存在现场湿作业量大、质量不易检测和控制等问题;干式连接技术工业化程度高,但对施工精度的要求也高,可能产生的螺栓松动、锈蚀以及磨损问题限制了其工程应用;将消能减震技术融入竖向接缝连接,利用超高性能混凝土实现水平接缝连接,并结合可恢复功能防震技术,是未来装配式剪力墙结构高质量发展的新增长点。

中国塑性成形技术和装备30年的重大突破与进展

1994以来的30年,在国家重大需求的强劲牵引下,我国塑性成形技术与装备取得举世瞩目的巨大成就,研制出一大批世界第一的成形装备,实现了三大技术跨越,形成了规模最大的研究队伍,我国塑性成形技术总体水平进入世界先进国家行列,多个单项技术和装备达到国际领先水平。选择了其中8项最具代表性成果,并介绍其在塑性工程理论和技术上取得的重大突破以及对国家重大装备研制的突出贡献,分析了我国塑性成形技术与国际领先水平的差距。最后对我国塑性成形技术发展将呈现出的“三超两高”五大发展趋势进行了展望。

西方曲式理论的新近发展及其启示

自20世纪60年代以来,西方曲式理论发展迅速。为弥补教科书式的曲式理论之不足,西方理论家力图对其进行改进和重构,或摒弃既有观念提出全新的曲式见解,并采用相互接力或并行发展的方式,不断推动曲式理论发展。在西方新的曲式理论和方法启示下,中国的曲式理论也呈现出对既有理论的质疑与挑战、对理论话语体系构建的强调、形成多样性方法与优化的理论建构思维、拥有丰富的作品资源和深度分析,以及理论家之间的互相承认与借鉴。

难变形金属小模数齿形件电流辅助分形旋压成形方法研究

针对难变形金属小模数齿形件采用传统滚齿及插齿方法制备时,存在材料利用率低、强韧性不足等问题,提出采用分形旋压方法实现此类小模数齿形件的完整近净成形。以模数为0.3的30CrMnSiA合金结构钢小模数齿形件为研究对象,设计制作了难变形金属小模数齿形件分形旋压成形工艺装备,并基于旋压成形试验进给研究了渐进式进给、主轴正反转进给和间歇式进给3种不同成形方式及有/无电流辅助条件对难变形金属小模数齿形件分形旋压的影响规律。结果表明:采用渐进式进给成形方式时,旋压成形缺陷最少,但所获得的轮齿饱和度仅为70.2%;采用正反转式成形方式时,成齿区易出现预成形齿顶与旋轮轮齿啮合错位而导致被两次分形的缺陷;采用间歇式进给式成形方式时,成齿区齿顶部分出现大量毛刺;采用渐进式成形方式,相同试验条件下,通入脉冲电流后,材料塑性变形能力显著提升,轮齿饱和度提高到95.7%。采用电流辅助分形旋压成形获得的小模数齿形件齿廓偏差为0.029 mm、齿距偏差为0.015 mm。

习近平文化思想的哲学阐释

习近平文化思想是习近平新时代中国特色社会主义思想的重要组成部分,是新时代中国共产党领导文化建设实践经验的理论概括和科学总结。习近平文化思想深刻体现了新时代中国共产党人文化主体性的守正创新,以“两个结合”为深厚底蕴,坚持民族性与世界性相融通,将“魂脉”与“根脉”相结合,在认识论、历史观和辩证法层面实现了对马克思主义哲学的时代创新。习近平文化思想正面回应了西方文明的现代性困境,聚焦西方现代文明的自反性问题和价值异化倾向,提出构建人类命运共同体与创造人类文明新形态的科学论断。习近平文化思想坚持守正与创新相结合、坚持主体性与多样性相融汇、坚持理论与实践相贯通,在实践中深化了对中国特色社会主义文化建设规律的深刻认识,展现了习近平文化思想蕴含的哲学意蕴,必将在新时代中国特色社会主义文化建设中展现思想伟力,在担当新时代新的文化使命中彰显马克思主义的真理力量。

偏心药型罩在D型装药中的设计及成型性能研究

为改进整体式多爆炸成型弹丸(Multiple Explosively Formed Projectile,MEFP)战斗部中位于边缘位置处的药型罩口部闭合较差的问题,设计一种沿周向壁厚不同的偏心药型罩。将该药型罩应用于D型装药结构战斗部中,通过理论分析以及数值仿真方法,针对药型罩较厚一侧朝向和偏心距大小对药型罩成型的影响规律进行研究,开展爆炸成型弹丸(Explosively Formed Projectile,EFP)软回收试验。研究结果表明:偏心药型罩较厚侧朝向及偏心距大小对EFP各方向速度基本无影响,对EFP成型效果影响较大;药型罩较厚侧朝向战斗部中心时成型效果最佳;偏心距的大小能够调整药型罩周围微元向中心压合的速度差,改善药型罩口部包合情况;试验中回收到的EFP成型结果与仿真结果吻合度较高;偏心药型罩通过调整药型罩壁厚与爆轰波强度的匹配关系能够改善非对称爆轰下EFP的成型,有效解决D型装药结构MEFP战斗部位于边缘位置处药型罩成型较差的问题,为整体式MEFP战斗部边缘位置处药型罩结构设计提供参考。

数字技术创新发展易货贸易的机遇及对策

以数字技术创新发展易货贸易,不仅是贯彻落实“发展数字贸易,加快建设贸易强国”重要精神的表现,也是加快形成和发展习近平总书记提出的“新质生产力”的重要表现。在以数字技术为代表的新一轮信息技术革命下,易货贸易通过数字赋能可以解决以往面临的信息不对称、供需难匹配等传统难题,并面临着创新发展的重要机遇。特别是,受世界百年未有之大变局和世纪疫情的叠加影响,数字赋能下的易货贸易有望成为应对世界经济“动荡”与“变革”等不确定性和风险的重要举措,并成为未来贸易方式的主导形态和新增长极。中国亟待抢抓这一新战略机遇,其战略意义不仅在于顺应经济全球化发展大势,实现中国对外贸易“增量提质”,更为重要的是,能更好地服务国家统筹开放和安全、加快推动人民币国际化等战略需要。为此,中国应尽快启动易货贸易新战略,依托数字赋能推动易货贸易创新发展,并将中国打造成为全球易货贸易的中心和枢纽。这也是实现党的二十大报告提出的建设数字贸易强国的题中应有之义。

药学教育实践教学形成性评价有效性探索

重视实践教学和应用型人才培养质量是高等药学教育的发展规律。有效、科学的形成性评价可为药学教育实践教学学习过程提供持续动态测评与反馈,为药学教育优质人才培养提供有力保障。文章总结提升药学教育实践教学形成性评价有效性的实践路径,为构建良好的形成性评价体系和保障育人质量提供参考和研究基础。