An Error-Correcting Code-Based Robust Watermarking Scheme for Stereolithographic Files

Stereolithographic(STL)files have been extensively used in rapid prototyping industries as well as many other fields as watermarking algorithms to secure intellectual property and protect three-dimensional models from theft.However,to the best of our knowledge,few studies have looked at how watermarking can resist attacks that involve vertex-reordering.Here,we present a lossless and robust watermarking scheme for STL files to protect against vertexreordering attacks.Specifically,we designed a novel error-correcting code(ECC)that can correct the error of any one-bit in a bitstream by inserting several check digits.In addition,ECC is designed to make use of redundant information according to the characteristics of STL files,which introduces further robustness for defense against attacks.No modifications are made to the geometric information of the three-dimensional model,which respects the requirements of a highprecision model.The experimental results show that the proposed watermarking scheme can survive numerous kinds of attack,including rotation,scaling and translation(RST),facet reordering,and vertex-reordering attacks.

USING ERROR-CORRECTING ENCODERS TO DESIGN LOCAL-RANDOM SEQUENCE GENERATORS

This paper proved the statement that a good linear block encoder is in fact a good local-random sequence generator. Furthermore, this statement discovers the deep relationship between the error-correcting coding theory and the modern cryptography.

Quantum secret sharing based on quantum error-correcting codes

Quantum secret sharing（QSS） is a procedure of sharing classical information or quantum information by using quantum states. This paper presents how to use a [2k- 1, 1, k] quantum error-correcting code （QECC） to implement a quantum （k, 2k-1） threshold scheme. It also takes advantage of classical enhancement of the [2k-1, 1, k] QECC to establish a QSS scheme which can share classical information and quantum information simultaneously. Because information is encoded into QECC, these schemes can prevent intercept-resend attacks and be implemented on some noisy channels.

Performance analysis and design of MIMO-OFDM system using concatenated forward error correction codes

This work investigates the performance of various forward error correction codes, by which the MIMO-OFDM system is deployed. To ensure fair investigation, the performance of four modulations, namely, binary phase shift keying(BPSK), quadrature phase shift keying(QPSK), quadrature amplitude modulation(QAM)-16 and QAM-64 with four error correction codes(convolutional code(CC), Reed-Solomon code(RSC)+CC, low density parity check(LDPC)+CC, Turbo+CC) is studied under three channel models(additive white Guassian noise(AWGN), Rayleigh, Rician) and three different antenna configurations(2×2, 2×4, 4×4). The bit error rate(BER) and the peak signal to noise ratio(PSNR) are taken as the measures of performance. The binary data and the color image data are transmitted and the graphs are plotted for various modulations with different channels and error correction codes. Analysis on the performance measures confirm that the Turbo + CC code in 4×4 configurations exhibits better performance.

A Decode-and-Forward Scheme for LDPC Coded Three-Way Relay Fading Channels

In this paper a low-density pairwise check(LDPC) coded three-way relay system is considered, where three user nodes desire to exchange messages with the help of one relay node. Since physical-layer network coding is applied, two time slots are sufficient for one round information exchange. In this paper, we present a decode-and-forward(DF) scheme based on joint LDPC decoding for three-way relay channels, where relay decoder partially decodes the network code rather than fully decodes all the user messages. Simulation results show that the new DF scheme considerably outperforms other common schemes in three-way relay fading channels.

Enhancement of Error-Correction Coding of Spatial Watermarks in Gray Code

This paper demonstrates how channel coding can improve the robustness of spatial image watermarks against signal distortion caused by lossy data compression such as the JPEG scheme by taking advantage of the properties of Gray code. Two error-correction coding (ECC) schemes are used here: One scheme, referred to as the vertical ECC (VECC), is to encode information bits in a pixel by error-correction coding where the Gray code is used to improve the performance. The other scheme, referred to as the horizontal ECC (HECC), is to encode information bits in an image plane. In watermarking, HECC generates a codeword representing watermark bits, and each bit of the codeword is encoded by VECC. Simple single-error-correcting block codes are used in VECC and HECC. Several experiments of these schemes were conducted on test images. The result demonstrates that the error-correcting performance of HECC just depends on that of VECC, and accordingly, HECC enhances the capability of VECC. Consequently, HECC with appropriate codes can achieve stronger robustness to JPEG—caused distortions than non-channel-coding watermarking schemes.

Spatial Image Watermarking by Error-Correction Coding in Gray Codes

In this paper, error-correction coding (ECC) in Gray codes is considered and its performance in the protecting of spatial image watermarks against lossy data compression is demonstrated. For this purpose, the differences between bit patterns of two Gray codewords are analyzed in detail. On the basis of the properties, a method for encoding watermark bits in the Gray codewords that represent signal levels by a single-error-correcting (SEC) code is developed, which is referred to as the Gray-ECC method in this paper. The two codewords of the SEC code corresponding to respective watermark bits are determined so as to minimize the expected amount of distortion caused by the watermark embedding. The stochastic analyses show that an error-correcting capacity of the Gray-ECC method is superior to that of the ECC in natural binary codes for changes in signal codewords. Experiments of the Gray-ECC method were conducted on 8-bit monochrome images to evaluate both the features of watermarked images and the performance of robustness for image distortion resulting from the JPEG DCT-baseline coding scheme. The results demonstrate that, compared with a conventional averaging-based method, the Gray-ECC method yields watermarked images with less amount of signal distortion and also makes the watermark comparably robust for lossy data compression.

Polar Codes for Soft Decode-and-Forward in HalfDuplex Relay Channels

Soft decode-and-forward(DF) can combine the advantages of both amplify-and-forward and hard DF in relay channels. In this paper, we propose a low-complexity soft DF scheme based on polar codes, which features two key techniques: a low-complexity cyclic redundancy check(CRC) aided list successive cancellation(CALSC) decoder and a soft information calculation method. At the relay node, a low-complexity CALSC decoder is designed to reduce the computational complexity by adjusting the list size according to the reliabilities of decoded bits. Based on the path probability metric of the CALSC decoder, we propose a method to compute the soft information of the decoded bits in CALSC. Simulation results show that our proposed scheme outperforms the soft DF based on low-density parity-check codes and the soft DF with belief propagation or soft cancellation decoder, especially in the case when the source-relay channel is at the high signal-to-ratio region.

Rate Adaptation for Decoding-and-Forward Relay Channel by Random Projections Codes

This paper investigates rate adaptation schemes for decoding-and-forward (DF) relay system based on random projections codes (RPC). We consider a classic three node relay system model, where relay node performs on half-duplex mode. Then, we give out receiving diversity relay scheme and coding diversity relay scheme, and present their jointly decoding methods. Furthermore, we discuss the performance of the two schemes with different power allocation coefficients. Simulations show that our relay schemes can achieve different gain with the help of relay node. And, we should allocate power to source node to just guarantee relay node can decode successfully, and allocate remain power to relay node as far as possible. In this way, this DF relay system not only achieves diversity gain, but also achieves higher and smooth spectrum efficiency.

A Novel Deterministic Quantum Communication Scheme Using Stabilizer Quantum Code

Exploiting the encoding process of the stabilizer quantum code [[n, k, d]], a deterministic quantum communication scheme, in which n - 1 photons are distributed forward and backward in two-way channel, is proposed to transmit the secret messages with unconditional security. The present scheme can be implemented to distribute the secret quantum （or classical） messages with great capacity in imperfect quantum channel since the utilized code encodes k-qubit messages for each scheme run.

ON CLASSICAL BCH CODES AND QUANTUM BCH CODES

It is a regular way of constructing quantum error-correcting codes via codes with self-orthogonal property, and whether a classical Bose-Chaudhuri-Hocquenghem (BCH) code is self-orthogonal can be determined by its designed distance. In this paper, we give the sufficient and necessary condition for arbitrary classical BCH codes with self-orthogonal property through algorithms. We also give a better upper bound of the designed distance of a classical narrow-sense BCH code which contains its Euclidean dual. Besides these, we also give one algorithm to compute the dimension of these codes. The complexity of all algorithms is analyzed. Then the results can be applied to construct a series of quantum BCH codes via the famous CSS constructions.

LT Code在基于DVB-S2文件多播系统中的安全应用

文章对欧洲卫星数据广播分发系统标准DVB-S2进行介绍,提出在气象卫星数据广播分发系统中,在应用层使用LT码进行前向纠错,以实现在恶劣的网络环境以及没有回传信道的情况下进行高速大文件分发、可靠的数据广播和完美的视频流服务。文章介绍LT码的核心理论,并对LT码的多个性能进行测试,得出了适用于该系统的一系列参数。

Physical Layer Deterministic Network Coding Using PUM Turbo Codes over AWGN Channel, N Nodes through a Base Station Scenario

Network Coding (NC) is a recent technique which is used to improve the transmission data rate and the power efficiency. These goals are obtained by combining data together before transmitting them, resulting to less transmitted data that carry the same amount of information. NC research work over the physical layer and the upper layers are popular and needed to be more investigated. In this paper, we propose a practical system of large-number of connected multi-source network coding (LMSNC), at the physical layer that exploits the broadcast nature of the wireless channel, using the practical and bandwidth-efficient schemes decode-and-forward (DF) and then compare it with Amplify and Forward (AF). The theoretical analysis and the simulation results show the effect of the noise when it cumulates in AF system and how DF is solving this severe default. Moreover, we consider the MSNC for Small-number of connected sources (SMSNC) and the two-way communication setup where two users exchange their information over an intermediate network node (ideally called Base Station), as two reference cases to compare with. With SMSNC, the number of necessary downlink transmissions from the intermediate node to the users is reduced, and thus the throughput is increased. Simulation results obtained using high-performance non-binary turbo codes, based on Partial Unit Memory (PUM) codes (4, 2, 1, 4) and (8, 4, 3, 8);confirm that combining PUM Turbo Code (PUMTC) and NC in the proposed MSNC setup gives almost the same BER performance as that for SMSNC at the small number of processing steps mainly when PUMTC (8, 4, 3, 8) is performed, which is required to retrieve the received coded messages. In the scenario of AF, combining packets results to cumulate the noise, which justifies the reason we decided to increase the number of transmitted coded messages in the network, i.e., the BER performance improves when sending extra coded messages. Finally, the possibility for a trade-off among BER, data rate and the number of transmitted coded messages is shown for LMSNC through graphics and simulation results.

Improved FEC Code Based on Concatenated Code for Optical Transmission Systems

The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existing FEC codes have been analyzed. The performance simulation of the Reed-Solomon（RS）＋ Bose-Chaudhuri-Hocguenghem（BCH） inner-outer serial concatenated code is implemented and the conceptions of encoding/decoding the parallel-concatenated code are presented. Furthermore, the simulation results for the RS（255,239） ＋RS（255,239） code and the RS（255,239） ＋RS（255,223） code show that the two consecutive concatenated codes are a superior coding scheme with such advantages as the better error correction, moderate redundancy and easy realization compared to the classic RS（255,239） code and other codes, and their signal to noise ratio gains are respectively 2-3 dB more than that of the RS（255,239）code at the bit error rate of 1 × 10^-13. Finally, the frame structure of the novel consecutive concatenated code is arranged to lay a firm foundation in designing its hardware.

Adaptive Jointing Superposition and Denoising-and-Forward Physical Layer Network Coding

The existing physical-layer network coding(PNC) can be grouped into three generic schemes,which are XOR-based PNC,superposition-based PNC,and denoising-and-forward(DNFbased) PNC.Generally speaking,DNF-based PNC has better performance of rate pair region compared with the other two schemes when the transmission is symmetric.When the transmission is asymmetric,its performance is degraded severely.However,superposition-based PNC does not have that limitation even if its rate pair region performance is inferior to that of DNF-based PNC and XOR-based PNC.In this paper,we focus on the combined use of the two PNC schemes,superposition-based PNC and DNFbased PNC,and present a novel PNC scheme called joint superposition and DNF physical-layer network coding(JSDNF-based PNC) as well as the information theory analysis of the achievable rate pair region.At the same time,in the proposed scheme,an adaptive power allocation factor is introduced.By changing the power factor,the system can adapt its rate pair region flexibly.The numerical results show that the proposed scheme achieves the largest rate pair region when the rate difference of two source signals is very large.At the same time,the support on asymmetric transmission is also an important profit of the scheme.

Self-dual Codes Defined on Factor Graphs

A definition of a self-dual code on graph and a procedure based on factor graphs to judge a self-dual code were presented. Three contributions of this paper were described as follows. To begin with, transform T_ R→L were defined, which was the basis of self-dual codes defined on graphs and played a key role in the paper. The second were that a self-dual code could be defined on factor graph, which was much different from conventional algebraic method. The third was that a factor graph approach to judge a self-dual code was illustrated, which took advantage of duality properties of factor graphs and our proposed transform T_ R→L to offer a convenient and geometrically intuitive process to judge a self-dual code.

Quantum BCH Codes Based on Spectral Techniques

When the time variable in quantum signal processing is discrete, the Fourier transform exists on the vector space of n-tuples over the Galois field F2, which plays an important role in the investigation of quantum signals. By using Fourier transforms, the idea of quantum coding theory can be described in a setting that is much different from that seen that far. Quantum BCH codes can be defined as codes whose quantum states have certain specified consecutive spectral components equal to zero and the error-correcting ability is also described by the number of the consecutive zeros. Moreover, the decoding of quantum codes can be described spectrally with more efficiency.

Data Combination over Physical Layer Using Network Coding with PUM Turbo Codes

The Base Station (BS) or access point is the building block of wireless networks, so, we propose exploiting it together with the Network Coding (NC) principle. NC suffers from the complexity of the decoding processes, i.e., complicated Jordan Gaussian Elimination (JGE) processes. So, this paper proposes a deterministic NC algorithm to reduce the number of sequential network decoding steps, and hence minimizing the complexity of JGE process resulting to better time delay and processing time. We propose an algorithm that combines higher number of the transmitted packets resulting to better data-rate but worse Bet Error Rate (BER). However, using such strong Forward error correction channel code, which is Partial Unit Memory Turbo Code (PUMTC) results to minimize the losses in the BER to a very acceptable lever, in fact, in Decode-and-Forward (DF) BS, the BER can be regarded as minimum. Simulation results, for both Amplify-and-Forward (AF) and DF BS schemes using PUMTC based on (8, 4, 3, 8) component codes, confirm that using PUMTC mitigates the problem of noise aggregation resulting from applying NC in the proposed schemes.

A Cooperative Forwarding Scheme for VANET Routing Protocols

Providing efficient packet delivery in vehicular ad hoc networks （VANETs） is particularly challenging due to the vehicle move- ment and lossy wireless channels. A data packet can be lost at a forwarding node even when a proper node is selected as the for- warding node. In this paper, we propose a loss-tolerant scheme for unicast routing protocols in VANETs. The proposed scheme employs multiple forwarding nodes to improve the packet reception ratio at the forwarding nodes. The scheme uses network coding to reduce the number of required transmissions, resulting in a significant improvement in end-to-end packet delivery ratio with low message overhead. The effectiveness of the proposed scheme is evaluated by using both theoretical analysis and computer sim-

Forward stagewise regression with multilevel memristor for sparse coding

Sparse coding is a prevalent method for image inpainting and feature extraction,which can repair corrupted images or improve data processing efficiency,and has numerous applications in computer vision and signal processing.Recently,sev-eral memristor-based in-memory computing systems have been proposed to enhance the efficiency of sparse coding remark-ably.However,the variations and low precision of the devices will deteriorate the dictionary,causing inevitable degradation in the accuracy and reliability of the application.In this work,a digital-analog hybrid memristive sparse coding system is pro-posed utilizing a multilevel Pt/Al_(2)O_(3)/AlO_(x)/W memristor,which employs the forward stagewise regression algorithm:The approxi-mate cosine distance calculation is conducted in the analog part to speed up the computation,followed by high-precision coeffi-cient updates performed in the digital portion.We determine that four states of the aforementioned memristor are sufficient for the processing of natural images.Furthermore,through dynamic adjustment of the mapping ratio,the precision require-ment for the digit-to-analog converters can be reduced to 4 bits.Compared to the previous system,our system achieves higher image reconstruction quality of the 38 dB peak-signal-to-noise ratio.Moreover,in the context of image inpainting,images containing 50%missing pixels can be restored with a reconstruction error of 0.0424 root-mean-squared error.