Forward hot extrusion forming process of 4-lobe aluminum alloy helical surface rotor

The 4-lobe aluminum alloy helical surface rotors are widely applied in industry,such as superchargers.Generally,the conventional manufacturing processes of aluminum alloy helical surface are time consuming and costly.To make the manufacturing processes more flexible and economical,the forward hot extrusion process is proposed to form the 4-lobe aluminum alloy helical surface rotors.In this work,we implement both simulations and experiments to the forming process of the helical surface,of which the material is 6063 aluminum alloy.The forward hot extrusion process is simulated with finite element method in DEFORM-3D.Based on the simulation method,the influences of different extrusion parameters,such as extrusion temperature,extrusion speed and extrusion ratio,on the extrusion process are studied.According to the numerical simulation results,the optimal case is chosen to carry out the experiment.Furthermore,the experimental results show that the surface is smooth;the toothed fill is full;the twist angle in the length direction is evenly distributed;the value of twist angle is roughly in line with the design angle,which is mainly due to the modified die structure,having a positive and significant effect on the increment of twist angle.Therefore,the twist angle has an increase of about 76%,which verifies the modified die structure.

Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy

The visco-plastic self-consistent (VPSC) model is extended to take the dynamical recrystallization (DRX) into account so that the hot extrusion texture of AZ80 magnesium alloy can be properly modeled. The effects of extrusion temperatures and imposed boundary conditions on the resulting textures were investigated, and good agreement can be found between the simulated and the measured extrusion textures. The simulated results show that the DRX grains are responsible for the formation of the {2110} fiber component since the {1010} poles of the DRX grains are tilted away from those of the unrecrystallized grains during the formation of their high angle boundaries (HABs). Furthermore, the basal poles of the grains are favorably oriented to the transversal direction (TD) where the imposed deformation is larger due to lower slip resistance of the basal slip. The elevated temperature enhances the activity of pyramidal ?c+a? slip modes and gives rise to a larger recrystallized volume fraction, resulting in a weakened extrusion texture.