The morphologies of the deposited dots on the 40 nm-thick copper film by the femtosecond laser-induced forward transfer that depend on the irradiated laser fluence have been studied, and the variations of orderliness ...The morphologies of the deposited dots on the 40 nm-thick copper film by the femtosecond laser-induced forward transfer that depend on the irradiated laser fluence have been studied, and the variations of orderliness of the diameter of deposited dots on the quartz substrate and forward ablated dot on the donor substrate with increasing pulse fluence have been obtained experimentally. The experimental results show that a thinner copper film would generate larger-sized ablated dot and deposited dot at the threshold fluence for transfer. By x-ray diffraction measurement, it is demonstrated that the crystal form of the transferred copper films is unaltered and the size of the crystallites is diminished.展开更多
Laser processing provides highly-controlled modification and on-demand fabrication of plasmon metal nanostructures for light absorption and photothermal convention.We present the laser-induced forward tansfer(LIFT)fab...Laser processing provides highly-controlled modification and on-demand fabrication of plasmon metal nanostructures for light absorption and photothermal convention.We present the laser-induced forward tansfer(LIFT)fabrication of silver nanomembranes in control of light absorption.By varying the hatch distance,different morphologies of randomly distributed plasmon silver nanostructures were produced,leading to well-controlled light absorption levels from 11%to 81%over broadband.The anti-reflection features were maintained below 17%.Equilibrated and plain absorptions were obtained throughout all absorption levels with a maximum intensity fluctuation of±8.5%for the 225μJ cases.The 45μJ pulse energy can offer a highly equilibrated absorption at a 60%absorption level with an intensity fluctuation of±1%.Pattern transfer was also achieved on a thin tape surface.The laser-transferred characters and patterns demonstrate a localized temperature rise.A rapid temperature rising of roughly 15℃can be achieved within 1 s.The LIFT process is highly efficiently fabricated with a typical speed value of 10^(3)to 10^(5)cm^(2)/h.The results indicated that LIFT is a well-controlled and efficient method for the production of optical films with specific absorption levels.展开更多
1 Results Key chraracteristics of high-performance photopolymers are not only their photosensitivity but also a clean and controlled photodecomposition without carbonization upon laser irradiation.Tailor-made photodec...1 Results Key chraracteristics of high-performance photopolymers are not only their photosensitivity but also a clean and controlled photodecomposition without carbonization upon laser irradiation.Tailor-made photodecomposible polymers with UV-sensitive aryltriazene chromophores covalently incorporated in the main chain proved to have convincing laser ablation properties at low threshold fluences.An improved synthesis procedure for such metastable compounds was developed and sets of new aryltriazene pho...展开更多
Additive manufacturing(AM)is an emerging customized three-dimensional(3D)functional product fabrication technology.It provides a higher degree of design freedom,reduces manufacturing steps,cost and production cycles.H...Additive manufacturing(AM)is an emerging customized three-dimensional(3D)functional product fabrication technology.It provides a higher degree of design freedom,reduces manufacturing steps,cost and production cycles.However,existing metallic component 3D printing techniques are mainly for the manufacture of single material components.With the increasing commercial applications of AM technologies,the need for 3D printing of more than one type of dissimilar materials in a single component increases.Therefore,investigations on multi-material AM(MMAM)emerge over the past decade.Lasers are currently widely used for the AM of metallic components where high temperatures are involved.Here we report the progress and trend in laser-based macro-and micro-scale AM of multiple metallic components.The methods covered in this paper include laser powder bed fusion,laser powder directed energy deposition,and laser-induced forward transfer for MMAM applications.The principles and process/material characteristics are described.Potential applications and challenges are discussed.Finally,future research directions and prospects are proposed.展开更多
基金Project supported by the Key Grant Project of the Ministry of Education of the People’s Republic of China (Grant No 10410)National Natural Science Fundation of China (Grant No 60572168)Science Research Start-up Fund of Civil Aviation University of China (Grant No qd02x11)
文摘The morphologies of the deposited dots on the 40 nm-thick copper film by the femtosecond laser-induced forward transfer that depend on the irradiated laser fluence have been studied, and the variations of orderliness of the diameter of deposited dots on the quartz substrate and forward ablated dot on the donor substrate with increasing pulse fluence have been obtained experimentally. The experimental results show that a thinner copper film would generate larger-sized ablated dot and deposited dot at the threshold fluence for transfer. By x-ray diffraction measurement, it is demonstrated that the crystal form of the transferred copper films is unaltered and the size of the crystallites is diminished.
基金Projects(61704090, 11904177) supported by the National Natural Science Foundation of ChinaProject(KFJJ20210205) supported by the National and Local Joint Engineering Laboratory of RF Integration and Micro-Assembly Technology,Nanjing University of Posts and Telecommunications,China。
文摘Laser processing provides highly-controlled modification and on-demand fabrication of plasmon metal nanostructures for light absorption and photothermal convention.We present the laser-induced forward tansfer(LIFT)fabrication of silver nanomembranes in control of light absorption.By varying the hatch distance,different morphologies of randomly distributed plasmon silver nanostructures were produced,leading to well-controlled light absorption levels from 11%to 81%over broadband.The anti-reflection features were maintained below 17%.Equilibrated and plain absorptions were obtained throughout all absorption levels with a maximum intensity fluctuation of±8.5%for the 225μJ cases.The 45μJ pulse energy can offer a highly equilibrated absorption at a 60%absorption level with an intensity fluctuation of±1%.Pattern transfer was also achieved on a thin tape surface.The laser-transferred characters and patterns demonstrate a localized temperature rise.A rapid temperature rising of roughly 15℃can be achieved within 1 s.The LIFT process is highly efficiently fabricated with a typical speed value of 10^(3)to 10^(5)cm^(2)/h.The results indicated that LIFT is a well-controlled and efficient method for the production of optical films with specific absorption levels.
文摘1 Results Key chraracteristics of high-performance photopolymers are not only their photosensitivity but also a clean and controlled photodecomposition without carbonization upon laser irradiation.Tailor-made photodecomposible polymers with UV-sensitive aryltriazene chromophores covalently incorporated in the main chain proved to have convincing laser ablation properties at low threshold fluences.An improved synthesis procedure for such metastable compounds was developed and sets of new aryltriazene pho...
文摘Additive manufacturing(AM)is an emerging customized three-dimensional(3D)functional product fabrication technology.It provides a higher degree of design freedom,reduces manufacturing steps,cost and production cycles.However,existing metallic component 3D printing techniques are mainly for the manufacture of single material components.With the increasing commercial applications of AM technologies,the need for 3D printing of more than one type of dissimilar materials in a single component increases.Therefore,investigations on multi-material AM(MMAM)emerge over the past decade.Lasers are currently widely used for the AM of metallic components where high temperatures are involved.Here we report the progress and trend in laser-based macro-and micro-scale AM of multiple metallic components.The methods covered in this paper include laser powder bed fusion,laser powder directed energy deposition,and laser-induced forward transfer for MMAM applications.The principles and process/material characteristics are described.Potential applications and challenges are discussed.Finally,future research directions and prospects are proposed.
