The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The st...The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The stress intensity factor and the critical applied stress for the dislocation emission are also calculated. In the limiting cases, well-known results can be obtained from the present solutions. Moreover, new exact solutions for a screw dislocation interacting with some complicated cracks are derived. The results show that the shielding effect increases with the increase in the length of the other cracks and the minor semi axis, but decreases with the increase of dislocation azimuth. The repulsion acting on the dislocation from the other phase and the other crack extend in the horizontal direction, which makes the dislocation emission at the crack tip take place more easily, but the minor semi axis of the elliptical hole extending in the vertical direction makes it more difficult.展开更多
In this paper, Muskhelishvili complex function theory and boundary collocation method are used to calculate the stress intensity factors (SIF) of a plate with two cracks emanating from an arbitrary hole. The calculate...In this paper, Muskhelishvili complex function theory and boundary collocation method are used to calculate the stress intensity factors (SIF) of a plate with two cracks emanating from an arbitrary hole. The calculated examples include a circular, elliptical, rectangular, or rhombic hole in a plate. The principle and procedure by the method is not only rather simple, but also has good accuracy. The SIF values calculated compare very favorably with the existing solutions. A t the same time,the method can be used far different finite plate with two cracks emanating from a hole with more complex geometrical and loading conditions. It is an effective unified approach for this kind of fracture problems.展开更多
The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A confo...The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A conformal mapping is proposed and combined with the complex variable method. Due to some difficulties in the calculation of the stress function, the mapping function is approximated and simplified via the applications of the series expansion. To validate the obtained solution, several examples are analyzed with the proposed method, the finite element method, etc. In addition, the effects of the lengths of the cracks and the ratio of the semi-axes of the elliptical hole(a/b) on the SIFs are studied. The results show that the present analytical solution is applicable to the SIFs for small cracks.展开更多
In this paper a group of stress functions has been proposed for the calculation of a crack emanating from a hole with different shape (including circular, elliptical, rectangular, or rhombic hole) by boundary collocat...In this paper a group of stress functions has been proposed for the calculation of a crack emanating from a hole with different shape (including circular, elliptical, rectangular, or rhombic hole) by boundary collocation method. The calculation results show that they coincide very well with the existing solutions by other methods for a circular or elliptical hole with a crack in an infinite plate. At the smae time, a series of results for different holes in a finite plate has also been obtained in this paper. The proposed functions and calculation procedure can be used for a plate of a crack emanating from an arbitrary hole.展开更多
Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solv...Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors （SIFs） for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.展开更多
By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investig...By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investigated. The solution of the stress intensity factor （SIF） for mode III problem has been found. Under the condition of limitation, both the known results and the SIF solution at the crack tip of a circular hole with two straight cracks and cross crack in one-dimensional hexagonal quasicrystals can be obtained.展开更多
The method of complex function and the method of Green's function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an...The method of complex function and the method of Green's function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamic stress intensity factor at the crack tip was given. A Green's function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.展开更多
The existing investigations on piezoelectric materials containing an elliptic hole or a crack mainly focus on remote uniform tensile loads.In order to have a better understanding for the fracture behavior of piezoelec...The existing investigations on piezoelectric materials containing an elliptic hole or a crack mainly focus on remote uniform tensile loads.In order to have a better understanding for the fracture behavior of piezoelectric materials under different loading conditions,theoretical and numerical solutions are presented for an elliptic hole or a crack in transversely isotropic piezoelectric materials subjected to uniform internal pressure and remote electro-mechanical loads.On the basis of the complex variable approach,analytical solutions of the elastic and electric fields inside and outside the defect are derived by satisfying permeable electric boundary condition at the surface of the elliptical hole.As an example of PZT-4 ceramics,numerical results of electro-elastic fields inside and outside the crack under various electric boundary conditions and electro-mechanical loads are given,and graphs of the electro-elastic fields in the vicinity of the crack tip are presented.The non-singular term is compared to the asymptotic one in the figures.It is shown that the dielectric constant of the air in the crack has no effect on the electric displacement component perpendicular to the crack,and the stresses in the piezoelectric material depend on the material properties and the mechanical loads on the crack surface and at infinity,but not on the electric loads at infinity.The figures obtained are strikingly similar to the available results.Unlike the existing work,the existence of electric fields inside an elliptic hole or a crack is considered,and the piezoelectric solid is subjected to complicated electro-mechanical loads.展开更多
Based on the complex potential method, the Greed’s functions of the plane problem in transversely isotropic piezoelectric media with an elliptic hole are obtained in terms of exact electric boundary conditions at th...Based on the complex potential method, the Greed’s functions of the plane problem in transversely isotropic piezoelectric media with an elliptic hole are obtained in terms of exact electric boundary conditions at the rim of the hole. When foe elliptic hole degenerates into a crack, the fundamental solutions for the field intensity factors arc given. The general solutions for concentrated and distributed loads applied on the surface of the hole or crack are produced through the superposition of fundamental solutions With the aid of these solutions , some erroneous results provided previously in other works are pointed out More important is that these solutions can be used as the fundamental solutions of boundary element method to solve more practical problems in piezoelectric media.展开更多
The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage toleranc...The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage tolerance analysis of these structures. In this paper, weight function is derived for a two dimensional through cracks at elliptical holes by applying a compounding method. Stress intensity factor formulas for an internal surface semi-elliptical crack in elliptical holes are obtained wing the three dimensional weight function method. Stress intensity factors for an internal surface semi-elliptical crack in elliptical holes under remote tension are computed. At the same time, research on how radius of curvature for elliptical holes affect stress intensity factors was conducted. Stress intensity factors decrease when radius of curvature increases. Some results and conclusions which are of practical value are given.展开更多
Up to now the analysis on aisnotropic effects of quasi-isotropic composites to material structures has not been found in literatures. In the present paper the strength model for triaxial woven materials proposed in ...Up to now the analysis on aisnotropic effects of quasi-isotropic composites to material structures has not been found in literatures. In the present paper the strength model for triaxial woven materials proposed in Part (I)[1]is applied to study the problems of an infintiely large plate of triaxial woven material containing either an either an elliptic hole or a crack. TO the elliptic hole problem the remote coritical loading as a function of the geometric parameters of woven materials is analysed and to the crack problem, the cracking orientation is examined. Finally the elasticity and strength models for a triaxial woven material proposed in Part (I)are verfied in terms of micromechanical analysis.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11172094 and 11172095)the Program for New Century Excellent Talents in University of Ministry of Education of China (Grant No. NCET-11-0122)+1 种基金the Science Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, China (Grant Nos. 61075005 and 51075001)the Fundamental Research Funds for the Central Universities (Hunan University), China
文摘The interaction between screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under loads at infinity is studied. The closed-form solution is derived for complex potentials. The stress intensity factor and the critical applied stress for the dislocation emission are also calculated. In the limiting cases, well-known results can be obtained from the present solutions. Moreover, new exact solutions for a screw dislocation interacting with some complicated cracks are derived. The results show that the shielding effect increases with the increase in the length of the other cracks and the minor semi axis, but decreases with the increase of dislocation azimuth. The repulsion acting on the dislocation from the other phase and the other crack extend in the horizontal direction, which makes the dislocation emission at the crack tip take place more easily, but the minor semi axis of the elliptical hole extending in the vertical direction makes it more difficult.
文摘In this paper, Muskhelishvili complex function theory and boundary collocation method are used to calculate the stress intensity factors (SIF) of a plate with two cracks emanating from an arbitrary hole. The calculated examples include a circular, elliptical, rectangular, or rhombic hole in a plate. The principle and procedure by the method is not only rather simple, but also has good accuracy. The SIF values calculated compare very favorably with the existing solutions. A t the same time,the method can be used far different finite plate with two cracks emanating from a hole with more complex geometrical and loading conditions. It is an effective unified approach for this kind of fracture problems.
文摘The existing analytical solutions are extended to obtain the stress fields and the stress intensity factors(SIFs) of two unequal aligned cracks emanating from an elliptical hole in an infinite isotropic plane. A conformal mapping is proposed and combined with the complex variable method. Due to some difficulties in the calculation of the stress function, the mapping function is approximated and simplified via the applications of the series expansion. To validate the obtained solution, several examples are analyzed with the proposed method, the finite element method, etc. In addition, the effects of the lengths of the cracks and the ratio of the semi-axes of the elliptical hole(a/b) on the SIFs are studied. The results show that the present analytical solution is applicable to the SIFs for small cracks.
文摘In this paper a group of stress functions has been proposed for the calculation of a crack emanating from a hole with different shape (including circular, elliptical, rectangular, or rhombic hole) by boundary collocation method. The calculation results show that they coincide very well with the existing solutions by other methods for a circular or elliptical hole with a crack in an infinite plate. At the smae time, a series of results for different holes in a finite plate has also been obtained in this paper. The proposed functions and calculation procedure can be used for a plate of a crack emanating from an arbitrary hole.
基金supported by the National Natural Science Foundation of China (Grant No 10761005)the Inner Mongolia Natural Science Foundation of China (Grant No 200607010104)
文摘Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors （SIFs） for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.
基金Project supported by the National Natural Science Foundation of China(No.10761005)the Natural Science Foundation of Inner Mongolia Autonomous Region(No.200607010104)
文摘By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investigated. The solution of the stress intensity factor （SIF） for mode III problem has been found. Under the condition of limitation, both the known results and the SIF solution at the crack tip of a circular hole with two straight cracks and cross crack in one-dimensional hexagonal quasicrystals can be obtained.
文摘The method of complex function and the method of Green's function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamic stress intensity factor at the crack tip was given. A Green's function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.
基金supported by Hebei Provincial Natural Science Foundation of China (Grant No. A2011210033)Foundation of Hebei Education Department of China (Grant No. ZH2011116)Hebei Provincial Research Program for Higher Education and Teaching Reformof China (Grant No. 103024)
文摘The existing investigations on piezoelectric materials containing an elliptic hole or a crack mainly focus on remote uniform tensile loads.In order to have a better understanding for the fracture behavior of piezoelectric materials under different loading conditions,theoretical and numerical solutions are presented for an elliptic hole or a crack in transversely isotropic piezoelectric materials subjected to uniform internal pressure and remote electro-mechanical loads.On the basis of the complex variable approach,analytical solutions of the elastic and electric fields inside and outside the defect are derived by satisfying permeable electric boundary condition at the surface of the elliptical hole.As an example of PZT-4 ceramics,numerical results of electro-elastic fields inside and outside the crack under various electric boundary conditions and electro-mechanical loads are given,and graphs of the electro-elastic fields in the vicinity of the crack tip are presented.The non-singular term is compared to the asymptotic one in the figures.It is shown that the dielectric constant of the air in the crack has no effect on the electric displacement component perpendicular to the crack,and the stresses in the piezoelectric material depend on the material properties and the mechanical loads on the crack surface and at infinity,but not on the electric loads at infinity.The figures obtained are strikingly similar to the available results.Unlike the existing work,the existence of electric fields inside an elliptic hole or a crack is considered,and the piezoelectric solid is subjected to complicated electro-mechanical loads.
文摘Based on the complex potential method, the Greed’s functions of the plane problem in transversely isotropic piezoelectric media with an elliptic hole are obtained in terms of exact electric boundary conditions at the rim of the hole. When foe elliptic hole degenerates into a crack, the fundamental solutions for the field intensity factors arc given. The general solutions for concentrated and distributed loads applied on the surface of the hole or crack are produced through the superposition of fundamental solutions With the aid of these solutions , some erroneous results provided previously in other works are pointed out More important is that these solutions can be used as the fundamental solutions of boundary element method to solve more practical problems in piezoelectric media.
文摘The hatches for inspecting are usually designed with elliptical holes in airplane structures, so computation of the stress intensity factor of three dimensional crack at elliptical holes is pivotal for damage tolerance analysis of these structures. In this paper, weight function is derived for a two dimensional through cracks at elliptical holes by applying a compounding method. Stress intensity factor formulas for an internal surface semi-elliptical crack in elliptical holes are obtained wing the three dimensional weight function method. Stress intensity factors for an internal surface semi-elliptical crack in elliptical holes under remote tension are computed. At the same time, research on how radius of curvature for elliptical holes affect stress intensity factors was conducted. Stress intensity factors decrease when radius of curvature increases. Some results and conclusions which are of practical value are given.
文摘Up to now the analysis on aisnotropic effects of quasi-isotropic composites to material structures has not been found in literatures. In the present paper the strength model for triaxial woven materials proposed in Part (I)[1]is applied to study the problems of an infintiely large plate of triaxial woven material containing either an either an elliptic hole or a crack. TO the elliptic hole problem the remote coritical loading as a function of the geometric parameters of woven materials is analysed and to the crack problem, the cracking orientation is examined. Finally the elasticity and strength models for a triaxial woven material proposed in Part (I)are verfied in terms of micromechanical analysis.
