A study on the simulation of carbon and water fluxes of Dangxiong alpine meadow and its response to climate change

The alpine meadow ecosystem accounts for 27%of the total area of the Tibetan Plateau and is also one of the most important vegetation types.The Dangxiong alpine meadow ecosystem,located in the south-central part of the Tibetan Plateau,is a typical example.To understand the carbon and water fluxes,water use efficiency(WUE),and their responses to future climate change for the alpine meadow ecosystem in the Dangxiong area,two parameter estimation methods,the Model-independent Parameter Estimation(PEST)and the Dynamic Dimensions Search(DDS),were used to optimize the Biome-BGC model.Then,the gross primary productivity(GPP)and evapotranspiration(ET)were simulated.The results show that the DDS parameter calibration method has a better performance.The annual GPP and ET show an increasing trend,while the WUE shows a decreasing trend.Meanwhile,ET and GPP reach their peaks in July and August,respectively,and WUE shows a“dual-peak”pattern,reaching peaks in May and November.Furthermore,according to the simulation results for the next nearly 100 years,the ensemble average GPP and ET exhibit a significant increasing trend,and the growth rate under the SSP5–8.5 scenario is greater than that under the SSP2–4.5 scenario.WUE shows an increasing trend under the SSP2–4.5 scenario and a significant increasing trend under the SSP5–8.5 scenario.This study has important scientific significance for carbon and water cycle prediction and vegetation ecological protection on the Tibetan Plateau.

A data assimilation-based forecast model of outer radiation belt electron fluxes

Because radiation belt electrons can pose a potential threat to the safety of satellites orbiting in space,it is of great importance to develop a reliable model that can predict the highly dynamic variations in outer radiation belt electron fluxes.In the present study,we develop a forecast model of radiation belt electron fluxes based on the data assimilation method,in terms of Van Allen Probe measurements combined with three-dimensional radiation belt numerical simulations.Our forecast model can cover the entire outer radiation belt with a high temporal resolution(1 hour)and a spatial resolution of 0.25 L over a wide range of both electron energy(0.1-5.0 MeV)and pitch angle(5°-90°).On the basis of this model,we forecast hourly electron fluxes for the next 1,2,and 3 days during an intense geomagnetic storm and evaluate the corresponding prediction performance.Our model can reasonably predict the stormtime evolution of radiation belt electrons with high prediction efficiency(up to~0.8-1).The best prediction performance is found for~0.3-3 MeV electrons at L=~3.25-4.5,which extends to higher L and lower energies with increasing pitch angle.Our results demonstrate that the forecast model developed can be a powerful tool to predict the spatiotemporal changes in outer radiation belt electron fluxes,and the model has both scientific significance and practical implications.

Simulation of internal nitrogen release from bottom sediments in an urban lake using a nitrogen flux model

Nutrient release from sediment is considered a significant source for overlying water. Given that nutrient release mechanisms in sediment are complex and difficult to simulate, traditional approaches commonly use assigned parameter values to simulate these processes. In this study, a nitrogen flux model was developed and coupled with the water quality model of an urban lake. After parameter sensitivity analyses and model calibration and validation, this model was used to simulate nitrogen exchange at the sediment–water interface in eight scenarios. The results showed that sediment acted as a buffer in the sediment–water system. It could store or release nitrogen at any time, regulate the distribution of nitrogen between sediment and the water column, and provide algae with nitrogen. The most effective way to reduce nitrogen levels in urban lakes within a short time is to reduce external nitrogen loadings. However, sediment release might continue to contribute to the water column until a new balance is achieved. Therefore, effective measures for reducing sediment nitrogen should be developed as supplementary measures. Furthermore, model parameter sensitivity should be individually examined for different research subjects.

Mathematical modeling of mixed convective MHD Falkner-Skan squeezed Sutterby multiphase flow with non-Fourier heat flux theory and porosity

In a wide variety of mechanical and industrial applications,e.g.,space cooling,nuclear reactor cooling,medicinal utilizations(magnetic drug targeting),energy generation,and heat conduction in tissues,the heat transfer phenomenon is involved.Fourier’s law of heat conduction has been used as the foundation for predicting the heat transfer behavior in a variety of real-world contexts.This model’s production of a parabolic energy expression,which means that an initial disturbance would immediately affect the system under investigation,is one of its main drawbacks.Therefore,numerous researchers worked on such problem to resolve this issue.At last,this problem was resolved by Cattaneo by adding relaxation time for heat flux in Fourier’s law,which was defined as the time required to establish steady heat conduction once a temperature gradient is imposed.Christov offered a material invariant version of Cattaneo’s model by taking into account the upper-connected derivative of the Oldroyd model.Nowadays,both models are combinedly known as the Cattaneo-Christov(CC)model.In this attempt,the mixed convective MHD Falkner-Skan Sutterby nanofluid flow is addressed towards a wedge surface in the presence of the variable external magnetic field.The CC model is incorporated instead of Fourier’s law for the examination of heat transfer features in the energy expression.A two-phase nanofluid model is utilized for the implementation of nano-concept.The nonlinear system of equations is tackled through the bvp4c technique in the MATLAB software 2016.The influence of pertinent flow parameters is discussed and displayed through different sketches.Major and important results are summarized in the conclusion section.Furthermore,in both cases of wall-through flow(i.e.,suction and injection effects),the porosity parameters increase the flow speed,and decrease the heat transport and the influence of drag forces.

Testing a Four-Dimensional Variational Data Assimilation Method Using an Improved Intermediate Coupled Model for ENSO Analysis and Prediction

A four-dimensional variational （4D-Var） data assimilation method is implemented in an improved intermediate coupled model （ICM） of the tropical Pacific. A twin experiment is designed to evaluate the impact of the 4D-Var data assimilation algorithm on ENSO analysis and prediction based on the ICM. The model error is assumed to arise only from the parameter uncertainty. The ＂observation＂ of the SST anomaly, which is sampled from a ＂truth＂ model simulation that takes default parameter values and has Gaussian noise added, is directly assimilated into the assimilation model with its parameters set erroneously. Results show that 4D-Var effectively reduces the error of ENSO analysis and therefore improves the prediction skill of ENSO events compared with the non-assimilation case. These results provide a promising way for the ICM to achieve better real-time ENSO prediction.

Real-Time Four-Dimensional Trajectory Generation Based on Gain-Scheduling Control and a High-Fidelity Aircraft Model

Aircraft ground movement plays a key role in improving airport efficiency,as it acts as a link to all other ground operations.Finding novel approaches to coordinate the movements of a fleet of aircraft at an airport in order to improve system resilience to disruptions with increasing autonomy is at the center of many key studies for airport airside operations.Moreover,autonomous taxiing is envisioned as a key component in future digitalized airports.However,state-of-the-art routing and scheduling algorithms for airport ground movements do not consider high-fidelity aircraft models at both the proactive and reactive planning phases.The majority of such algorithms do not actively seek to optimize fuel efficiency and reduce harmful greenhouse gas emissions.This paper proposes a new approach for generating efficient four-dimensional trajectories(4DTs)on the basis of a high-fidelity aircraft model and gainscheduling control strategy.Working in conjunction with a routing and scheduling algorithm that determines the taxi route,waypoints,and time deadlines,the proposed approach generates fuel-efficient 4DTs in real time,while respecting operational constraints.The proposed approach can be used in two contexts:①as a reactive decision support tool to generate new trajectories that can resolve unprecedented events;and②as an autopilot system for both partial and fully autonomous taxiing.The proposed methodology is realistic and simple to implement.Moreover,simulation studies show that the proposed approach is capable of providing an up to 11%reduction in the fuel consumed during the taxiing of a large Boeing 747-100 jumbo jet.

Variation in the surface heat flux on the north and south slopes of Mount Qomolangma

The distinctive conditions present on the north and south slopes of Mount Qomolangma,along with the intricate variations in the underlying surfaces,result in notable variations in the surface energy flux patterns of the two slopes.In this paper,data from TESEBS(Topographical Enhanced Surface Energy Balance System),remote sensing data from eight cloud-free scenarios,and observational data from nine stations are utilized to examine the fluctuations in the surface heat flux on both slopes.The inclusion of MCD43A3 satellite data enhances the surface albedo,contributing to more accurate simulation outcomes.The model results are validated using observational data.The RMSEs of the net radiation,ground heat,sensible heat,and latent heat flux are 40.73,17.09,33.26,and 30.91 W m^(−2),respectively.The net radiation flux is greater on the south slope and exhibits a rapid decline from summer to autumn.Due to the influence of the monsoon,on the north slope,the maximum sensible heat flux occurs in the pre-monsoon period in summer and the maximum latent heat flux occurs during the monsoon.The south slope experiences the highest latent heat flux in summer.The dominant flux on the north slope is sensible heat,while it is latent heat on the south slope.The seasonal variations in the ground heat flux are more pronounced on the south slope than on the north slope.Except in summer,the ground heat flux on the north slope surpasses that on the south slope.

Evaluating Parameterizations for Turbulent Fluxes over the Landfast Sea-Ice Surface in Prydz Bay, Antarctica

It is crucial to appropriately determine turbulent fluxes in numerical models.Using data collected in East Antarctica from 8 April to 26 November 2016,this study evaluates parameterization schemes for turbulent fluxes over the landfast seaice surface in five numerical models.The Community Noah Land Surface Model with Multi-Parameterizations Options(Noah_mp)best replicates the turbulent momentum flux,while the Beijing Climate System Model(BCC_CSM)produces the optimum sensible and latent heat fluxes.In particular,two critical issues of parameterization schemes,stability functions and roughness lengths,are investigated.Sensitivity tests indicate that roughness lengths play a decisive role in model performance.Based on the observed turbulent fluxes,roughness lengths over the landfast sea-ice surface are calculated.The results,which can provide a basis for setting up model parameters,reveal that the dynamic roughness length(z0m)increases with the increase of frictional velocity(u*)when u*≤0.4 m s^(−1) and fluctuates around 10^(−3 )m when u*>0.4 m s^(−1);thermal roughness length(z0t)is linearly related to the temperature gradient between air and sea-ice surface(ΔT)with a relation of lg(z0t)=−0.29ΔT−3.86;and the mean water vapor roughness length(z0q)in the specific humidity gradient(Δq)range ofΔq≤−0.6 g kg^(−1) is 10^(−6) m,3.5 times smaller than that in the range ofΔq˃−0.6 g kg^(−1).

Calibration and validation of SiBcrop Model for simulating LAI and surface heat fluxes of winter wheat in the North China Plain

The accurate representation of surface characteristic is an important process to simulate surface energy and water flux in land-atmosphere boundary layer.Coupling crop growth model in land surface model is an important method to accurately express the surface characteristics and biophysical processes in farmland.However,the previous work mainly focused on crops in single cropping system,less work was done in multiple cropping systems.This article described how to modify the sub-model in the SiBcrop to realize the accuracy simulation of leaf area index(LAI),latent heat flux(LHF)and sensible heat flux(SHF)of winter wheat growing in double cropping system in the North China Plain(NCP).The seeding date of winter wheat was firstly reset according to the actual growing environment in the NCP.The phenophases,LAI and heat fluxes in 2004–2006 at Yucheng Station,Shandong Province,China were used to calibrate the model.The validations of LHF and SHF were based on the measurements at Yucheng Station in 2007–2010 and at Guantao Station,Hebei Province,China in 2009–2010.The results showed the significant accuracy of the calibrated model in simulating these variables,with which the R2,root mean square error(RMSE)and index of agreement(IOA)between simulated and observed variables were obviously improved than the original code.The sensitivities of the above variables to seeding date were also displayed to further explain the simulation error of the SiBcrop Model.Overall,the research results indicated the modified SiBcrop Model can be applied to simulate the growth and flux process of winter wheat growing in double cropping system in the NCP.

Simulating Dry Deposition Fluxes of PM_(10) and Particulate Inorganic Nitrogen over the Eastern China Seas During a Severe Asian Dust Event Using WRF-Chem Model

A WRF-Chem model including a comprehensive gas-phase nitrogen chemistry module was used to simulate a severe dust event appearing in the eastern China on 19-25 March, 2002. The modeling result well reproduced PM10 concentrations in various distances from the dust sources and the transport pathway of the dust strom. The results showed that both the concentrations and the dry deposition fluxes of PM10 increased over the China seas during the dust event following the passage of a cold front system. The maximum fluxes of PM10 in the Yellow Sea and the East China Sea during the dust event were 5.5 and 8.4 times of those before the event, respectively. However, the temporal variations of the dry deposition fluxes of particulate inorganic nitrogen differed over the Yellow Sea from those over the East China Sea. Nitrate and ammonium in the whole northern China rapidly decreased because of the intrusion of dust-loaded air on 19 March. The dust plume arrived in the Yellow Sea on 20 March, decreasing the particulate inorganic nitrogen in mass concentration accordingly. The minimum dry deposition fluxes of nitrate and ammonium in the Yellow Sea were about 3/5 and 1/6 of those before the dust arrival, respectively. In contrast, when the dust plume crossed over the Yangtze Delta area, it became abundant in nitrate and ammonium and increased the concentrations and dry deposition fluxes of particulate inorganic nitrogen over the East China Sea, where the maximum dry deposition fluxes of nitrate and ammonium increased approximately by 4.1 and 2.6 times of those prior to the dust arrival.

Estimating the carbon fluxes of forests with an individual-based forest model

Background： Capturing the response of forest ecosystems to inter-annual climate variability is a great challenge.In this study, we tested the capability of an individual-based forest gap model to display carbon fluxes at yearly and daily time scales.The forest model was applied to a spruce forest to simulate the gross primary production（GPP）, respiration and net ecosystem exchange（NEE）.We analyzed how the variability in climate affected simulated carbon fluxes at the scale of the forest model.Results： Six years were simulated at a daily time scale and compared to the observed eddy covariance（EC） data.In general, the seasonal cycle of the individual carbon fluxes was correctly described by the forest model.However, the estimated GPP differed from the observed data on the days of extreme climatic conditions.Two new parameterizations were developed： one resulting from a numerical calibration, and the other resulting from a filtering method.We suggest new parameter values and even a new function for the temperature limitation of photosynthesis.Conclusions： The forest model reproduced the observed carbon fluxes of a forest ecosystem quite wel.Of the three parameterizations, the calibrated model version performed best.However, the filtering approach showed that calibrated parameter values do not necessarily correctly display the individual functional relations.The concept of simulating forest dynamics at the individual base is a valuable tool for simulating the NEE, GPP and respiration of forest ecosystems.

Effect of Counter-Gradient in the Computation of Turbulent Fluxes of Heat and Moisture in a Regional Model

The counter-gradient terms in the computations of turbulent fluxes of heat and moisture have been included in the PBL parameterization of a regional model for monsoon prediction. Results show that inclusion of counter-gradient terms has a marginal impact in the prediction of large scale monsoon circulation and rainfall rates.

Study of the pressure transient behavior of directional wells considering the effect of non-uniform flux distribution

During the production,the fluid in the vicinity of the directional well enters the wellbore with different rates,leading to non-uniform flux distribution along the directional well.However,in all existing studies,it is oversimplified to a uniform flux distribution,which can result in inaccurate results for field applications.Therefore,this paper proposes a semi-analytical model of a directional well based on the assumption of non-uniform flux distribution.Specifically,the direction well is discretized into a carefully chosen series of linear sources,such that the complex well trajectory can be captured and the nonuniform flux distribution along the wellbore can be considered to model the three-dimensional flow behavior.By using the finite difference method,we can obtain the numerical solutions of the transient flow within the wellbore.With the aid of Green's function method,we can obtain the analytical solutions of the transient flow from the matrix to the wellbore.The complete flow behavior of a directional well is perfectly represented by coupling the above two types of transient flow.Subsequently,on the basis of the proposed model,we conduct a comprehensive analysis of the pressure transient behavior of a directional well.The computation results show that the flux variation along the direction well has a significant effect on pressure responses.In addition,the directional well in an infinite reservoir may exhibit the following flow regimes:wellbore afterflow,transition flow,inclined radial flow,elliptical flow,horizontal linear flow,and horizontal radial flow.The horizontal linear flow can be observed only if the formation thickness is much smaller than the well length.Furthermore,a dip region that appears on the pressure derivative curve indicates the three-dimensional flow behavior near the wellbore.

The Role of Cultural Compatibility in Effective Management The Application of Cultural Four-dimensional Model in Transnational Corporations

Cross-cultural management is often regarded as a discipline of international management focusing on cultural encounters between the organization and the nation-state, and providing tools to tackle cultural difl＇erences seen as sources of conflict, friction or misunderstanding. Based on Greet Hofstede＇ s Cultural Model, this paper attempts to shed some light on effective corporation management through cultural analysis of the difl＇erences between China and western countries. The paper puts more emphasis on the impact of cultural compatibility on effective corporation man- agement through the case study of China, Japan, Germany and America. The author argues that managers and employ- ees involved in companies with diverse cultural backgrounds should be integrated and developed into a specific local context through interlocking their cultural identifications and the organizational practices.

The impacts of modeling global CO2 concentrations with GEOS-Chem using different ocean carbon fluxes

The rise in atmospheric carbon dioxide(C02)concentrations caused by human activities is leading to global climate change,which poses a threat to human development and survival.This study analyzed the distribution of the ocean carbon flux with interannual changes and compared it with the climatological ocean carbon flux to deepen our understanding of carbon sources and sinks.To simulate global CO2 concentrations for the years2008-2010,the ocean carbon flux with interannual changes and the climatological ocean carbon flux were used to drive the GEOS-Chem model,an atmospheric chemical transport model.The simulated values were compared with the CO2 concentrations at nine observation stations to explore the influence of interannual changes in the ocean carbon fluxes on the simulated CO2 concentrations.The authors found that the difference between the two simulation results was greater in the Southern Hemisphere all year,and the difference in autumn was the largest.Compared with the observations,the simulated CO2 concentration of the ocean carbon flux with interannual changes is closer to the observations,indicating that this simulation is more accurate.

Contribution to the Full 3D Finite Element Modelling of a Hybrid Stepping Motor with and without Current in the Coils

The paper presents our contribution to the full 3D finite element modelling of a hybrid stepping motor using COMSOL Multiphysics software. This type of four-phase motor has a permanent magnet interposed between the two identical and coaxial half stators. The calculation of the field with or without current in the windings (respectively with or without permanent magnet) is done using a mixed formulation with strong coupling. In addition, the local high saturation of the ferromagnetic material and the radial and axial components of the magnetic flux are taken into account. The results obtained make it possible to clearly observe, as a function of the intensity of the bus current or the remanent induction, the saturation zones, the lines, the orientations and the magnetic flux densities. 3D finite element modelling provide more accurate numerical data on the magnetic field through multiphysics analysis. This analysis considers the actual operating conditions and leads to the design of an optimized machine structure, with or without current in the windings and/or permanent magnet.

基于FluxNet的热传导方程反问题的求解器

热传导偏微分方程的求解是工业应用中一种重要的计算,为了解决传统的热传导方程正演运算耗时过长的问题,提出一个基于新型的网络结构FluxNet的求解器。通过热传导方程的正演运算获得关于温度场分布图以及对应的热流密度图的数据集,基于深度学习训练该数据集,建立一个具有卷积层和反卷积层的热流密度网络结构FluxNet模型。使用该求解器预测数据以及实际数据的热流密度图进行测试和验证,实验结果得出该求解器预测的热流密度结构相似度均达到90%以上,达到了工业应用需求。

Model of Spectral Fluxes for Solar Spectrograph

Taking use of the solar spectrograph in Yunnan Observatory, we built a model to estimate the spectral fluxes of solar spectrograph with computer and confirmed the result by observations. The spectral fluxes in visible and near infrared bands were calculated for the solar spectrograph of Yunnan Observatory.

Modeling of surface flux in Tongyu using the Simple Biosphere Model 2 (SiB2)

The modeling ability of a stand-alone version of the Simple Biosphere Model 2（SiB2） was tested mainly through diagnosing the simulated latent heat（LE）,sensible heat（H）,CO2 flux,and air temperature at the Tongyu field observation station（44°25＇N,122°52＇E,184 m elevation） of Coordinated Enhanced Observing Period（CEOP）,where the land cover is cropland and grassland.In the whole year of 2003,the canopy height and the leaf area index was variable.During non-growth period,the surface would become bare,while during the growth period,the canopy height could reach 2.0 m high over cropland and 0.8 m high over grassland,respectively,and max leaf area index could reach 4.2 and 2.4,respectively.The model was initialized with measurement and driven by half-hourly atmospheric observations.The simulation values for 2003 were compared against measurements.Results show that the model is of a good ability of simulating the hourly latent heat（LE）,sensible heat（H）,CO2 flux and temperature during the growth period.Moreover,the daily LE,H and CO2 flux simulated by SiB2 could reflect their yearly change reasonably.However,the model may overestimate the H generally.

Fluxes Footprint and Source Area of Rubber Plantation

[Objective] The paper was to analyze the quality of flux observation data of rubber plantation.[Method]Based on the FSAM model,footprint and flux source area were analyzed according to the continuous flux measurement with the open-path eddy covariance system on the 50 m tower of Danzhou Key Field Station of Observation and Research for Tropical Agricultural Resources and Environments,Ministry of Agriculture from Jan 1 to Jun 30,2010.[Result] Under unstable stratification,source areas were smaller than those under stable conditions,and source areas in the dormant season were larger than those in the growing season at the same level.In the main wind direction 130°-270°,the upwind range of source areas was in the magnitude of 100-758 m and vertical upwind range was-251-251 m at 80% level under unstable stratification in the growing season,and they were some large than those under the unstable stratification in the dormant season.The source areas of the upwind and vertical upwind ranges were 173-1 858,-534-534 m especially under stable stratification in the growing season,and they were smaller than those under stable stratification in the dormant season.In the other wind directions of 0°-130° and 270°-360°,the ranges were similar to those of the growing season in the prevailing wind direction under the same atmospheric conditions.[Conclusion] The study would lay a foundation for the future flux calculation and analysis.