Impact of effective stress on permeability for carbonate fractured-vuggy rocks

To gain insight into the flow mechanisms and stress sensitivity for fractured-vuggy reservoirs,several core models with different structural characteristics were designed and fabricated to investigate the impact of effective stress on permeability for carbonate fractured-vuggy rocks(CFVR).It shows that the permeability performance curves under different pore and confining pressures(i.e.altered stress conditions)for the fractured core models and the vuggy core models have similar change patterns.The ranges of permeability variation are significantly wider at high pore pressures,indicating that permeability reduction is the most significant during the early stage of development for fractured-vuggy reservoirs.Since each obtained effective stress coefficient for permeability(ESCP)varies with the changes in confining pressure and pore pressure,the effective stresses for permeability of four representative CFVR show obvious nonlinear characteristics,and the variation ranges of ESCP are all between 0 and 1.Meanwhile,a comprehensive ESCP mathematical model considering triple media,including matrix pores,fractures,and dissolved vugs,was proposed.It is proved theoretically that the ESCP of CFVR generally varies between 0 and 1.Additionally,the regression results showed that the power model ranked highest among the four empirical models mainly applied in stress sensitivity characterization,followed by the logarithmic model,exponential model,and binomial model.The concept of“permeability decline rate”was introduced to better evaluate the stress sensitivity performance for CFVR,in which the one-fracture rock is the strongest,followed by the fracture-vug rock and two-horizontalfracture rock;the through-hole rock is the weakest.In general,this study provides a theoretical basis to guide the design of development and adjustment programs for carbonate fractured-vuggy reservoirs.

Research on Quantitative Identification of Three-Dimensional Connectivity of Fractured-Vuggy Reservoirs

The fractured-vuggy carbonate oil resources in the western basin of China are extremely rich.The connectivity of carbonate reservoirs is complex,and there is still a lack of clear understanding of the development and topological structure of the pore space in fractured-vuggy reservoirs.Thus,effective prediction of fractured-vuggy reservoirs is difficult.In view of this,this work employs adaptive point cloud technology to reproduce the shape and capture the characteristics of a fractured-vuggy reservoir.To identify the complex connectivity among pores,fractures,and vugs,a simplified one-dimensional connectivity model is established by using the meshless connection element method(CEM).Considering that different types of connection units have different flow characteristics,a sequential coupling calculation method that can efficiently calculate reservoir pressure and saturation is developed.By automatic history matching,the dynamic production data is fitted in real-time,and the characteristic parameters of the connection unit are inverted.Simulation results show that the three-dimensional connectivity model of the fractured-vuggy reservoir built in this work is as close as 90%of the fine grid model,while the dynamic simulation efficiency is much higher with good accuracy.

Utilization mechanism of foam flooding and distribution situation of residual oil in fractured-vuggy carbonate reservoirs

The development of fractured-vuggy carbonate reservoirs is extremely difficult because of the complex fractured-vuggy structure and strong heterogeneity.Foam flooding is a potential enhanced oil recovery(EOR)technology in fractured-vuggy carbonate reservoirs.Based on the similarity criterion,three types of 2D visual physical models of the fractured-vuggy structure were made by laser ablation technique,and a 3D visual physical model of the fractured-vuggy reservoir was made by 3D printing technology.Then the physical analog experiments of foam flooding were carried out in these models.The experimental results show that foam can effectively improve the mobility ratio,control the flow velocity of the fluid in different directions,and sweep complex fracture networks.The effect of foam flooding in fractures can be improved by increasing foam strength and enhancing foam stability.The effect of foam flooding in vugs can be improved by reducing the density of the foam and the interfacial tension between foam and oil.Three types of microscopic residual oil and three types of macroscopic residual oil can be displaced by foam flooding.This study verifies the EOR of foam flooding in the fractured-vuggy reservoir and provides theoretical support for the application of foam flooding in fractured-vuggy reservoirs.

Three-dimensional physical simulation and optimization of water injection of a multi-well fractured-vuggy unit

With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.

Lost circulation material for abnormally high temperature and pressure fractured-vuggy carbonate reservoirs in Tazhong block, Tarim Basin, NW China

To effectively solve the problem of lost circulation and well kick frequently occurring during the drilling of abnormally high temperature and pressure fractured-vuggy reservoirs in the Tazhong block, a rigid particle material, GZD, with high temperature tolerance, high rigidity(> 8 MPa) and low abrasiveness has been selected based on geological characteristics of the theft zones in the reservoirs. Through static pressure sealing experiments, its dosage when used alone and when used in combination with lignin fiber, elastic material SQD-98 and calcium carbonate were optimized, and the formula of a new type(SXM-I) of compound lost circulation material with high temperature tolerance and high strength was formed. Its performance was evaluated by compatibility test, static sealing experiment and sand bed plugging experiment. The test results show that it has good compatibility with drilling fluid used commonly and is able to plug fractures and vugs, the sealed fractures are able to withstand the static pressure of more than 9 MPa and the cumulative leakage is 13.4 mL. The mud filtrate invasion depth is only 2.5 cm in 30 min when the sand bed is made of particles with sizes between 10 mesh and 20 mesh. Overall, with good sealing property and high temperature and high pressure tolerance, the lost circulation material provides strong technical support for the safety drilling in the block.

Inter-well interferences and their influencing factors during water flooding in fractured-vuggy carbonate reservoirs

Based on the characteristics of injection-production units in fractured-vuggy carbonate reservoirs,nine groups of experiments were designed and performed to analyze the interference characteristics and their influencing factors during water flooding.Based on percolation theory,an inversion model for simulating waterflooding interferences was proposed to study the influence laws of different factors on interference characteristics.The results show that well spacing,permeability ratio,cave size,and cave location all affect the interference characteristics of water flooding.When the cave is located in high permeability fractures,or in the small well spacing direction,or close to the producer in an injection-production unit,the effects of water flooding are much better.When the large cave is located in the high-permeability or small well spacing direction,the well in the direction with lower permeability or smaller well spacing will see water breakthrough earlier.When the cave is in the higher permeability direction and the reserves between the water injector and producer differ greatly,the conductivity differences in different injection-production directions are favorable for water flooding.When the injection-production well pattern is constructed or recombined,it’s better to make the reserves of caves in different injection-production directions proportional to permeability,and inversely proportional to the well spacing.The well close to the cave should be a producer,and the well far from the cave should be an injector.Different ratios of cave reserves to fracture reserves correspond to different optimal well spacings and optimal permeability ratios.Moreover,both optimal well spacing and optimal permeability ratio increase as the ratio of cave reserves to fracture reserves increases.

Mechanisms of remaining oil formation by water flooding and enhanced oil recovery by reversing water injection in fractured-vuggy reservoirs

To get a deeper understanding on the formation mechanisms and distribution laws of remaining oil during water flooding, and enhanced oil recovery(EOR) mechanisms by reversing water injection after water flooding, 3D visualization models of fractured-vuggy reservoir were constructed based on the elements and configuration of fractures and vugs, and typical fracture-vug structures by using advanced CT scanning and 3D printing technologies. Then, water flooding and reversing water injection experiments were conducted. The formation mechanisms of remaining oil during water flooding include inadequate injection-production well control, gravity difference between oil and water, interference between different flow channels, isolation by low connectivity channel, weak hydrodynamic force at the far end. Under the above effects, 7 kinds of remaining oil may come about, imperfect well-control oil, blind side oil, attic oil at the reservoir top, by-pass residual oil under gravity, by-pass residual oil in secondary channel, isolated oil in low connectivity channel, and remaining oil at far and weakly connected end. Some remaining oil can be recovered by reversing water injection after water flooding, but its EOR is related to the remaining oil type, fracture-cavity structure and reversing injection-production structure. Five of the above seven kinds of remaining oil can be produced by six EOR mechanisms of reversing water injection: gravity displacement, opening new flow channel, rising the outflow point, hydrodynamic force enhancement, vertically equilibrium displacement, and synergistic effect of hydrodynamic force and gravity.

Practice and knowledge of volumetric development of deep fractured-vuggy carbonate reservoirs in Tarim Basin, NW China

Different from the continental layered sandstone and fracture-pore carbonate reservoirs, the fractured-vuggy carbonate reservoirs in the Tarim Basin are mainly composed of fractured-vuggy bodies of different sizes and shapes. Based on years of study on the geological features, flow mechanisms, high-precision depiction and the recovery mode of fractured-vuggy bodies, the idea of “volumetric development” is proposed and put into practice. A “body by body” production methodology is established with respect to volumetric unit of fractures and vugs based on vuggy body’s spatial allocation and reserves. A variety of development wells, various technological methods, and multi-type injection media are used to develop this type of reservoirs in an all-around way. As a result, the resource and production structures of the Tahe oilfield are significantly improved and a highly efficient development is achieved.

Experiments on nitrogen assisted gravity drainage in fractured-vuggy reservoirs

Visual models of fractured-vuggy reservoirs were designed and manufactured to conduct experiments of nitrogen assisted gravity drainage(NAGD). The impacts of flooding pattern, gas injection rate, well type, and displacement direction(vertical or horizontal) on development performances and remaining oil distribution were studied. The results show that during NAGD, the sweep scope is decided by the connections between producer and reservoir, and the local sweep efficiency is decided by fracture-vuggy configuration. The homogenous fractured reservoir has higher oil recovery, and the bigger the aperture of fracture is, the higher the recovery. The main regions of remaining oil due to poor connectivity and gas-oil gravity difference include blind fractures and vugs below the connected fractures, the bottom of vugs, and the narrow and low-angle fractures. The accumulation of remaining oil in the bottom of reservoir is easily formed and controlled by the connections between producers and reservoir. The higher the gas injection rate and the stronger the fracture heterogeneity, the earlier the gas channeling and the lower the oil recovery of the producer will be.Horizontal wells have the best development effect, so horizontal well can be applied in fractured-vuggy reservoirs without bottom water.Producers should be preferentially drilled at low structural position. Gas channeling firstly occurs in the producer at high structural position, and it should be shut in timely to improve the utilization of injected gas.

Wormholes propagation for fractured-vuggy formation:Laboratory tests,numerical simulation and field application

The propagation of wormhole is vital important for matrix acidizing and acid fracturing in carbonate reservoirs.While the formation of acid dissolved wormhole is derived from heterogeneous physical and chemical transportations and reactions.Alveolate dissolved pores,krast caves,and natural fissures are the major reservoir spaces for the Sinian dolomite formation in the Anyue gas field of the Sichuan Basin.There were four categories of formation,which are matrix dominated,inter-breccia dissolved pore dominated,dissolved pore and cave dominated,and fissure and cave dominated,based on the development intensity and connectedness of caves and fissures.The caves and fissures make the wormhole formation and propagation particularly complicated.Firstly,the 3-D topological structure of dissolved pores,vugs,fissures and throats inside cores is quantitatively scanned by CT imaging technology for its feature of vivid and damage-free.Secondly,3-D patterns of wormhole are obtained with CT scanning after core flooding by acid.Additionally,the porethroat network model is reconstructed with digital cores technology.Then,the size and ratio of pore and throat before and after core flooding by acid is analyzed and the absolute permeability of pore scale flow is numerically simulated to understand the fundamental influence of pores and vugs distribution and connectedness on wormhole propagation.Lastly,the wormhole pattern gained by CT scanning and simulating with two-scale model is compared.Meanwhile,the corrected two-scale model is utilized to simulate the wormhole propagation for matrix acidizing and acid fracturing of Sinian fractured-vuggy dolomite in Anyue gas field,Sichuan Basin.The optimized injection rate and volume were in agreement with the characteristic matrix acidizing operating curve,which indicates that the two-scale model was suitable for matrix acidizing optimization design of such formations.In addition,the simulated acid etched fracture length with considering the dynamic wormhole leakoff was consistent with the well testing interpreted result.

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

Plugging agents have been widely used to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,the harsh conditions of fractured-vuggy carbonate reservoirs yield a significant challenge in maintaining a long-term stabilization of plugging agents.In this work,we developed an anti-hightemperature and high-salinity polymer gel(APG)with excellent resistance to high temperature(140℃)and ultra-high salinity(240000 mg/L).The rheology and microstructure of APG were characterized before and after gelation.Core plugging tests on fractured cubic cores were conducted to quantify the plugging performance of the gel system.Experimental results showed that the Sclerglucan and Cobalt(Ⅱ)Chloride Hexahydrate filled the three-dimensional(3-D)network with various morphologies,providing extra protection to the cross-linking points of the 3D network structure of APG and thus,leading to a prolongation of the dehydration time.The dehydration rate of APG was only 5%within 30days,and the strength of APG could be maintained at a rigid or near-rigid level over 150 days.Moreover,APG exhibited satisfactory shear and scour resistance.Core plugging tests showed that APG could achieve a plugging rate of 90%and demonstrate ignorable minor damage to the substrate.Our results indicate that APG can serve as a great candidate in channel plugging in fractured-vuggy carbonate reservoirs where fractures are fully developed.

Study on gas-liquid relative permeability experiments of fractured-porous reservoirs

For carbonate reservoirs,gas-water and oil-gas relative permeability curve are of importance for parameters calculation in oil-field development,dynamic analysis and numerical reservoir simulation.The oil-gas/gas-water relative permeability curves were measured with unstable method under normal temperature and low pressure,using fifteen artificial fractured cores.The shape and change characteristics of gas/water and oil/gas relative permeability curve were mainly analyzed.The results showed that for the relative permeability curve of water driving gas.The saturation of equal permeability point,the saturation range of two-phase flow region and the displacement efficiency has a good power-function relation with core permeability.In addition,the saturation of equal permeability point,the saturation range of two-phase flow region and the displacement efficiency will decrease with the increasing of core permeability.However,for oil-gas relative permeability curves,the saturation of equal permeability point,the saturation range of two-phase flow region and the displacement efficiency will increase with the increasing of core permeability.It should be noted that the gas relative permeability presents a straight line in the normalized relative permeability curve,which indicates that the main flow is dominated by fracture with low displacement efficiency.The research results provide theory basis for fracture-vuggy carbonate reservoir development and new research idea for the further study of this kind of reservoir.