Complication rates after direct anterior vs posterior approach for hip hemiarthroplasty in elderly individuals with femoral neck fractures

BACKGROUND Dislocation rates after hemiarthroplasty reportedly vary from 1%to 17%.This serious complication is associated with increased morbidity and mortality rates.Approaches to this surgery are still debated,with no consensus regarding the superiority of any single approach.AIM To compare early postoperative complications after implementing the direct anterior and posterior approaches(PL)for hip hemiarthroplasty after femoral neck fractures.METHODS This is a comparative,retrospective,single-center cohort study conducted at a university hospital.Between March 2008 and December 2018,273 patients(a total of 280 hips)underwent bipolar hemiarthroplasties(n=280)for displaced femoral neck fractures using either the PL(n=171)or the minimally invasive direct anterior approach(DAA)(n=109).The choice of approach was related to the surgeons’practices;the implant types were similar and unrelated to the approach.Dislocation rates and other complications were reviewed after a minimum followup of 6 mo.RESULTS Both treatment groups had similarly aged patients(mean age:82 years),sex ratios,patient body mass indexes,and patient comorbidities.Surgical data(surgery delay time,operative time,and blood loss volume)did not differ significantly between the groups.The 30 d mortality rate was higher in the PL group(9.9%)than in the DAA group(3.7%),but the difference was not statistically significant(P=0.052).Among the one-month survivors,a significantly higher rate of dislocation was observed in the PL group(14/154;9.1%)than in the DAA group(0/105;0%)(P=0.002).Of the 14 patients with dislocation,8 underwent revision surgery for recurrent instability(posterior group),and one of them had 2 additional procedures due to a deep infection.The rate of other complications(e.g.,perioperative and early postoperative periprosthetic fractures and infection-related complications)did not differ significantly between the groups.CONCLUSION These findings suggest that the DAA to bipolar hemiarthroplasty for patients with femoral neck fractures is associated with a lower dislocation rate(<1%)than the PL.

Evaluating the stability and volumetric flowback rate of proppant packs in hydraulic fractures using the lattice Boltzmann-discrete element coupling method

The stability and mobility of proppant packs in hydraulic fractures during hydrocarbon production are numerically investigated by the lattice Boltzmann-discrete element coupling method(LB-DEM).This study starts with a preliminary proppant settling test,from which a solid volume fraction of 0.575 is calibrated for the proppant pack in the fracture.In the established workflow to investigate proppant flowback,a displacement is applied to the fracture surfaces to compact the generated proppant pack as well as further mimicking proppant embedment under closure stress.When a pressure gradient is applied to drive the fluid-particle flow,a critical aperture-to-diameter ratio of 4 is observed,above which the proppant pack would collapse.The results also show that the volumetric proppant flowback rate increases quadratically with the fracture aperture,while a linear variation between the particle flux and the pressure gradient is exhibited for a fixed fracture aperture.The research outcome contributes towards an improved understanding of proppant flowback in hydraulic fractures,which also supports an optimised proppant size selection for hydraulic fracturing operations.

Visualization and characterization of experimental hydraulic fractures interacting with karst fracture-cavity distributions

Karst fracture-cavity carbonate reservoirs,in which natural cavities are connected by natural fractures to form cavity clusters in many circumstances,have become significant fields of oil and gas exploration and exploitation.Proppant fracturing is considered as the best method for exploiting carbonate reservoirs;however,previous studies primarily focused on the effects of individual types of geological formations,such as natural fractures or cavities,on fracture propagation.In this study,true-triaxial physical simulation experiments were systematically performed under four types of stress difference conditions after the accurate prefabrication of four types of different fracture-cavity distributions in artificial samples.Subsequently,the interaction mechanism between the hydraulic fractures and fracture-cavity structures was systematically analyzed in combination with the stress distribution,cross-sectional morphology of the main propagation path,and three-dimensional visualization of the overall fracture network.It was found that the propagation of hydraulic fractures near the cavity was inhibited by the stress concentration surrounding the cavity.In contrast,a natural fracture with a smaller approach angle(0°and 30°)around the cavity can alleviate the stress concentration and significantly facilitate the connection with the cavity.In addition,the hydraulic fracture crossed the natural fracture at the 45°approach angle and bypassed the cavity under higher stress difference conditions.A new stimulation effectiveness evaluation index was established based on the stimulated reservoir area(SRA),tortuosity of the hydraulic fractures(T),and connectivity index(CI)of the cavities.These findings provide new insights into the fracturing design of carbonate reservoirs.

Beyond the imaging evaluation of fractures of the lateral process of the talus:Let’s not forget concomitant injuries

Fractures of the lateral process of the talus(FLPT)are uncommon fractures that represent a clinical challenge.Traditional radiological classification systems rely predominantly on radiographic findings.However,due to the high rate of FLPT misdiagnosis and the limited accuracy in evaluating concomitant talar injuries through plain radiographs,novel imaging classification systems have been developed that aim to enhance the diagnosis of concomitant talar injuries,thereby optimizing patient management and reducing the incidence of long-term complications.

Characteristics of proppant transport and placement within rough hydraulic fractures

A three-dimensional reconstruction of rough fracture surfaces of hydraulically fractured rock outcrops is carried out by casting process,a large-scale experimental setup for visualizing rough fractures is built to perform proppant transport experiments.The typical characteristics of proppant transport and placement in rough fractures and its intrinsic mechanisms are investigated,and the influences of fracture inclination,fracture width and fracturing fluid viscosity on proppant transport and placement in rough fractures are analyzed.The results show that the rough fractures cause variations in the shape of the flow channel and the fluid flow pattern,resulting in the bridging buildup during proppant transport to form unfilled zone,the emergence of multiple complex flow patterns such as channeling,reverse flow and bypassing of sand-carrying fluid,and the influence on the stability of the sand dune.The proppant has a higher placement rate in inclined rough fractures,with a maximum increase of 22.16 percentage points in the experiments compared to vertical fractures,but exhibits poor stability of the sand dune.Reduced fracture width aggravates the bridging of proppant and induces higher pumping pressure.Increasing the viscosity of the fracturing fluid can weaken the proppant bridging phenomenon caused by the rough fractures.

Stress tensor determination by modified hydraulic tests on pre-existing fractures:Method and stress constraints

The hydraulic testing of pre-existing fractures(HTPF)is one of the most promising in situ stress measurement methods,particularly for three-dimensional stress tensor determination.However,the stress tensor determination based on the HTPF method requires at least six tests or a minimum of 14-15 tests(under different conditions)for reliable results.In this study,we modified the HTPF method by considering the shear stress on each pre-existing fracture,which increased the number of equations for the stress tensor determination and decreased the number of tests required.Different shear stresses were attributed to different fractures by random sampling;therefore,the stress tensors were obtained by searching for the optimal solution using the least squares criterion based on the Monte Carlo method.Thereafter,we constrained the stress tensor based on the tensile strength criterion,compressive strength criterion,and vertical stress constraints.The inverted stress tensors were presented and analyzed based on the tensorial nature of the stress using the Euclidean mean stress tensor.Two stress-measurement campaigns in Weifang(Shandong Province,China)and Mercantour road tunnel(France)were implemented to highlight the validity and efficiency of the modified HTPF(M-HTPF)method.The results showed that the M-HTPF method can be applied for stress tensor inversion using only three to four tests on pre-existing fractures,neglecting the stress gradient.The inversion results were confined to relatively small distribution dispersions and were significantly reliable and stable due to the shear stresses on the fractures and the stress constraints employed.The M-HTPF method is highly feasible and efficient for complete stress tensor determination in a single borehole.

Treatment of a femoral neck fracture combined with ipsilateral femoral head and intertrochanteric fractures: A case report

BACKGROUND This article presents a rare case of a complex hip fracture involving the ipsilateral femoral neck,trochanter,and femoral head,that was accompanied by hip dislocation.Currently,there is no established standard treatment method for this specific type of fracture.Therefore,it is crucial to comprehensively consider factors such as patient age,fracture type,and degree of displacement to achieve a successful outcome.CASE SUMMARY A 38-year-old man sustained a comminuted fracture of his right hip as a result of a car accident.The injuries included a fracture of the femoral head,a fracture of the femoral neck,an intertrochanteric fracture of the femur,and a posterior dislocation of the hip on the same side.We opted for a treatment approach combining the use of a proximal femoral locking plate,cannulated screws,and Kirschner wires.Following the surgery,we developed an individualized rehabil-itation program to restore patient limb function.CONCLUSION For this complex fracture,we selected appropriate internal fixation and for-mulated individualized rehabilitation,which ultimately achieved good results.

Management of Mandibular Fractures in Children in Ivory Coast: Experience of the Stomatology and Maxillofacial Surgery Department at the University Hospital of Cocody from 2000 to 2019

Introduction: Mandibular fractures in children are becoming increasingly common. Treatment of these fractures is difficult due to their anatomical and physiological complexity. Therefore, there is a need for well-codified management. Our main aim was to develop a decision algorithm for the management of mandibular fractures in children based on our experience. Materials and Methods: This was a retrospective descriptive study carried out in the Department of Stomatology and Maxillofacial Surgery at the University Hospital of Cocody over a period of 20 years (2000-2019). Results: We enrolled 58 patients. The mean age of the patients was 9.35 ± 2.3 years with a sex ratio of 2.22. Traffic accidents were the main cause of mandibular fractures (60.35%). Condylar fractures were the most common (46.87%). Treatment was orthopedic in 45.76% of cases, mixed (orthopedic and surgical) in 24.14% and surgical in 5.17%. Patients were followed up weekly for 1 month, then monthly for 6 months and annually for 3 years, with panoramic radiographs of the maxilla starting at 21 days. We observed 2 cases of complications: temporomandibular ankylosis and gingival stomatitis. Conclusion: Mandibular fractures are common in children. Management is difficult due to anatomical and physiological peculiarities. The choice of treatment depends on several criteria.

Development characteristics and controlling factors of fractures in lacustrine shale and their geological significance for evaluating shale oil sweet spots in the third member of the Shahejie Formation in the Qikou Sag, Bohai Bay Basin

Natural fractures are critical for shale oil and gas enrichment and development. Due to the extremely high heterogeneity of shale, the factors controlling the formation of internal fractures, especially horizontal fractures, remain controversial. In this study, we integrate thin section analysis and microcomputed tomography(CT) data from several lacustrine shale samples from the third member(Es3) of the Shahejie Formation, Qikou Sag, Bohai Bay Basin, to assess the fractures in detail. The goal is to reveal the development characteristics, controlling factors, and geological significance for evaluating sweet spots in a shale oil play. The fractures in the Es3contain high-angle structural and horizontal bed-parallel fractures that are mostly shear and extensional. Various factors influence fracture development,including lithofacies, mineral composition, organic matter content, and the number of laminae. Structural fractures occur predominantly in siltstone, whereas bed-parallel fractures are abundant in laminated shale and layered mudstone. A higher quartz content results in higher shale brittleness, causing fractures, whereas the transformation between clay minerals contributes to the development of bedparallel fractures. Excess pore pressure due to hydrocarbon generation and expulsion during thermal advance can cause the formation of bed-parallel fractures. The density of the bed-parallel and structural fractures increases with the lamina density, and the bed-parallel fractures are more sensitive to the number of laminae. The fractures are critical storage spaces and flow conduits and are indicative of sweet spots. The laminated shale in the Es3with a high organic matter content contains natural fractures and is an organic-rich, liquid-rich, self-sourced shale play. Conversely, the siltstone, massive mudstone, and argillaceous carbonate lithofacies contain lower amounts of organic matter and do not have bed-parallel fractures. However, good reservoirs can form in these areas when structural fractures are present and the source, and storage spaces are separated.

Effect of navigation endoscopy combined with threedimensional printing technology in the treatment of orbital blowout fractures

●AIM:To explore the combined application of surgical navigation nasal endoscopy(NNE)and three-dimensional printing technology(3DPT)for the adjunctive treatment of orbital blowout fractures(OBF).●METHODS:Retrospective analysis was conducted on the data of patients with OBF who underwent surgical treatment at the Affiliated Eye Hospital of Nanchang University between July 2012 and November 2022.The control group consisted of patients who received traditional surgical treatment(n=43),while the new surgical group(n=52)consisted of patients who received NNE with 3DPT.The difference in therapeutic effects between the two groups was evaluated by comparing the duration of the operation,best corrected visual acuity(BCVA),enophthalmos difference,recovery rate of eye movement disorder,recovery rate of diplopia,and incidence of postoperative complications.●RESULTS:The study included 95 cases(95 eyes),with 63 men and 32 women.The patients’age ranged from 5 to 67y(35.21±15.75y).The new surgical group and the control group exhibited no statistically significant differences in the duration of the operation,BCVA and enophthalmos difference.The recovery rates of diplopia in the new surgical group were significantly higher than those in the control group at 1mo[OR=0.03,95%CI(0.01–0.15),P<0.0000]and 3mo[OR=0.11,95%CI(0.03–0.36),P<0.0000]postoperation.Additionally,the recovery rates of eye movement disorders at 1 and 3mo after surgery were OR=0.08,95%CI(0.03–0.24),P<0.0000;and OR=0.01,95%CI(0.00–0.18),P<0.0000.The incidence of postoperative complications was lower in the new surgical group compared to the control group[OR=4.86,95%CI(0.95–24.78),P<0.05].●CONCLUSION:The combination of NNE and 3DPT can shorten the recovery time of diplopia and eye movement disorder in patients with OBF.

Frontal Sinus Fractures: Management at the Yalgado Ouedraogo University Hospital Centre (Burkina Faso)

Introduction: Frontal sinus fractures are potentially serious. They are defined as a solution of continuity, open or closed, of one or both bone tables of the frontal sinus. This study aims to report on the management of them at the Yalgado OUEDRAOGO University Hospital Centre. Methodology: It is a descriptive cross-sectional study with retrospective collection from January 01, 2016 to December 31, 2018. Patients with frontal sinus fractures were managed at the Yalgado OUEDRAOGO University Hospital Centre through CT-scan proof. Results: Over three years, a total of 102 cases of frontal sinus fractures were collected with 29.9 years as average age. There were 96 men. Workers in the informal sector and pupils/students represented 58.90% of patients. The residence of the patients was urban in 68.80% of cases and rural in 31.40%. Road traffic accidents (RTAs) happened in 90.20%, and involved 2-wheelers in 98.20%. None of these drivers was wearing a helmet. The type III frontal fracture of Ioannides et al. represented 51.9% of cases. In 89.21% of cases, other facial and/or cranioencephalic injuries were compounded to frontal sinus fractures. No surgical management was observed in 82 (80.39%) patients and surgical management in 20 (19.61%) patients. The outcome was favourable, but sequelae and/or complications were noted in 10 patients who had surgery and 30 patients who did not. Conclusion: These results enforce helmet wearing for all riders of two-wheeled machines. In addition, vaccinations to prevent meningitis in frontal sinus fractures with dural breach should be systematic.

Damage Characteristics Analysis and Fractal Study of Shale With Prefabricated Fractures under Thermal-mechanical Coupling

To study the damage and failure of shale with different fracture inclination angles under uniaxial compression loading,in this work,RFPA2D-Thermal,a two-dimensional real failure process analysis software,was used for numerical simulation.Numerical simulation results show that quartz in shale mainly affects the tensile and compressive strength of shale by increasing rock brittleness.The coupling of temperature and pressure will cause lateral and volume destruction of shale,which enables the shale body to be more easily broken.Fracture inclination is the key factor affecting shale damage patterns.The failure mode of shale with low-and high-angle fractures is mainly shear failure,and the compressive strength does not vary with crack inclination.The damage mode of obliquely intersecting fractured shale is slip damage along the fracture face,the compressive strength decreases and then increases with the fracture inclination,and a minimum value exists.The acoustic emission simulation results of the damage process effectively reflect the accumulated internal damage and macroscopic crack appearance until fracture instability when the prefabricated fractured shale is subjected to uniaxial compressive loading.The crack inclinations of 0°and 120℃ corresponds to the most complex"N"shape damage mode.The crack inclinations of 30°and 60°,and the damage mode is an inverted"λ"shape.

Evaluation of Some Treatment Options Inlate and Neglected Hip Fractures Using the Modified Harris Hip Score

Background: The choice of the appropriate operative intervention in patients with late and neglected hip fracture continuous to be a huge dilemma for orthopedic surgeons. Purpose: To evaluate the satisfaction or otherwise of some treatment options using the modified Harris-hip score (HHS) in resource poor setting. Materials and Methods: A retrospective cross-sectional study conducted at ATBUTH, Bauchi. Data of 60 patients over the age of 18 years with hip fractures (femoral neck, intertrochanteric and sub trochanteric fractures) who had operative intervention between 1st September 2019 and 31st August 2020 with cannulated screws, Proximal femur lock compression plate (PFLCP), cementlessor cemented bipolar hemiarthroplasty (BHA). Results: The mean age of studied patients was 65.7 ± 16.1 years, with age ranging from 19 - 101 years. M:F ratio was 1.2:1 across all age groups and 1:1.4 amongst those >60 years. 51 patients (85%) presented > 1 week after injury with 24 patients (40%) sustaining hip fractures from low energy trivial indoor fall and 28 patients (46.7%) mostly younger sustaining fractures from high energy motor vehicular accident (MVA). The prevalence rate for femoral neck, intertrochanteric and subtrochanteric fractures were 32 (53.3%), 17 (28.3%) and 11 (18.3%) respectively. From the data retrieved, 21patients (35.0%), 17 patients (28.3%), 20 patients (33.3%) and 2 patients (3.3%) had PFLCP, cemented BHA, cementless BHA and cannulated screw fixation respectively. Most (66.7%) of those who had PFLCP achieved satisfactory radiologic union and there was also 94.1% and 85% satisfactory outcome rate amongst the patients with cemented BHA and cementless BHA respectively. Irrespective of the operative intervention method at 1 year follow-up, there was a statistically significant improvement in post-operative HHS (P value 0.02), with 83.4% having good to excellent results. Conclusion: There is highrate of late and neglected hip fracture in our environment. Satisfactory outcome with statistically significant improvement in Post-operative HHS was achieved in patients treated for hip fractures.

Functional Outcomes of Adult Tibia Shaft Fractures Treated with Solid Intramedullary Nails versus Hollow Nails: A Systematic Review

Introduction: The management of fractures of the tibia shaft is an important aspect of orthopaedic care, and the selection of the surgical method for fixation can substantially impact patient outcomes. The current review aims to compare the outcomes of adult tibia fractures treated with solid nails to those treated with hollow nails. Methods: A search on Scopus, PubMed, and Cochrane Library, using three keywords (Outcome, Tibia shaft fractures, Nail) was conducted in April 2023. Results were compiled and two independent reviewers screened and selected eligible articles After removing duplicates, titles and abstracts were read to exclude ineligible studies. Full-text articles of the remaining papers were read to select eligible studies which were further critically appraised to ascertain their methodological quality. The data extracted from the selected papers were synthesized using a combination of pooling of results, tests of statistical difference (t-test and chi-square) and narrative synthesis methods. Results: A total of 2295 articles were obtained from the databases and citation searching. A total of 9 papers were identified as eligible and included in the review. Findings revealed that there is no statistical difference in the outcomes of tibia fractures treated with either solid or hollow nail groups such as duration of surgery (p = 0.541), rate of delayed and non-union (p = 0.342), and rate of surgical site infections (p = 0.395). Conclusion: Intramedullary nailing of tibia shaft fractures with either solid or hollow nails have similar functional outcomes.

Malnutrition and Its Association with the Mortality of Patients with Femoral Intertrochanteric Fractures: A Retrospective Analysis of Japanese Patients

Background: The incidence of femoral intertrochanteric fractures in older adults is higher than that of femoral neck fractures;however, both conditions are often analyzed together as proximal femoral fractures. Considering the difference in treatment, postoperative complication, and mortality risk, these two fractures should be analyzed separately. This study aimed to analyze 1-year mortality and its risk factors in patients with surgically treated femoral intertrochanteric fractures. Methods: Consecutive patients with intertrochanteric fractures who underwent surgical interventions at our institution between January 2017 and December 2021 were retrospectively reviewed. A total of 238 patients were eligible for inclusion in this study. Patients’ demographic and clinical information were retrospectively collected. Patients were divided into the 1-year mortality (n = 16) and survival (n = 222) groups. The incidence of 1-year mortality and its independent risk factors were investigated using univariate and multivariate logistic regression analyses. Results: The mean age of patients was 85.6 ± 8.5 years. The 1-year mortality rate was 6.7% (16/238). Preoperative albumin level, the Geriatric Nutritional Risk Index (GNRI), and malnutrition status (GNRI p = 0.02, p = 0.02, and p = 0.0011, respectively). Multivariate analysis showed that malnutrition status (GNRI p = 0.035) was an independent risk factor for 1-year mortality. Conclusion: Malnutrition status assessed using GNRI (GNRI < 92) was an independent risk factor for 1-year mortality. Our findings suggest that GNRI may be an effective screening tool for predicting postoperative 1-year mortality of patients with surgically treated femoral intertrochanteric fractures.

Factors influencing the continuity of evidence-based practice in perioperative airway management for elderly patients with fractures:A qualitative study

BACKGROUND More and more evidence-based practices are emerging,but researchers mostly focus on short-term effects,resulting in evidence-based practices not being applied in the clinic in the long term.In this study,we took the evidence-based practice of perioperative airway management in elderly fracture patients as an example and adopted a descriptive phenomenological approach to understand the influencing factors of its sustainability to provide a reference basis for promoting the continuity of evidence-based practice in the clinic.AIM To explore factors influencing the persistence of evidence-based practice in perioperative airway management in elderly patients with fractures.METHODS This study was qualitative research.Nine nurses who implemented evidencebased practice in the orthopedic ward of a tertiary comprehensive hospital in Shanghai from September 2023 to October 2023 were selected using purposive sampling as research subjects.Semi-structured interviews were conducted with them,and the data were analyzed using the Colaizzi phenomenological analysis method based on the three dimensions and ten factors of the NHS sustainability model.RESULTS Three main themes and ten subthemes were identified:Process aspects(benefits to patients,benefits to nurses,lack of follow-up,complex processes);staff aspects(insufficient human resources,inadequate training and education,lack of leadership support);and organizational environment aspects(inadequate infrastructure,poor patient compliance,poor doctor cooperation).CONCLUSION Human resources,training and education,leadership support,infrastructure,and patient-physician collaboration are important factors influencing the sustainability of evidence-based practice for perioperative airway management in older patients with fractures.

Health economics for intra-capsular hip fractures undertaking fixation

BACKGROUND Hip fracture is a common musculoskeletal injury in the elderly requiring surgery worldwide.The operative mainstay of intra-capsular hip fractures is arthroplasty with a smaller proportion for fixation.AIM To determine the most beneficial method of fixation for patients with intracapsular hip fractures.METHODS A registered audit from 2012-2018 was conducted on all intra-capsular hip fractures treated with 2 commonly used fixation methods.Patient notes,electronic records and clinical codes for cost benefit were evaluated.A validated quality of life measure was collected at least 1 year after surgery.RESULTS A total of 83 patients were identified with intra-capsular fractures undergoing fixation during the retrospective period.There were 47 cannulated cancellous screw and 36 sliding hip screw fixations with the case mix comparable for age,gender,co-morbidities and fracture configuration.There was no significant difference in blood loss,tip apex distance,radiation exposure,length of stay,radiological union time,collapse,avascular necrosis or re-operation between fixation methods.Logistic regression analysis demonstrated displaced intracapsular hip fractures correlated significantly with an undesirable outcome conferring a relative odds ratio of 7.25.There were 9(19%)and 4(11%)patients respectively,who required re-operation.There was no significant difference in health resource group tariff and implant cost with comparable EQ-5D and visual CONCLUSION No significant advantage was identified with differing fixation type,but irrespective there were a high number of patients requiring re-operation.This was predicted by initial fracture displacement and patient age.Arthroplasty may need to be carefully considered for health economics and patient benefit.

Watson-Jones Anatomical Approach for Open Reduction and Internal Fixation of Proximal Femoral Fractures without Image Intensifier in a Low-Resource Setting

Introduction: Standard procedures for surgical fixation of proximal femoral fractures (PFF) require an image intensifier which in developing countries remains a luxury. We hypothesized that, with a well-codified technique, the Watson Jones approach (WJA) without image intensifier nor traction table, can allow open reduction and internal fixation (ORIF) of PFF using Dynamic hip screw (DHS), with satisfactory outcome. Patients and methods: Forty one consecutive patients (mean age 59.5 ± 21.6 years, 61% males) who were followed in a Teaching Hospital for PFF treated by ORIF using the WJA and DHS from January 2016 to December 2020 were reassessed. The outcome measures were the quality of the reduction, the positioning of the implants, the tip-apex distance (TAD), the rate and delay of consolidation, the functional results using Postel Merle d’Aubigné (PMA) score, the rate of surgical site infection (SSI) and the overall mortality. Logistic regression was used to determine factors associated with mechanical failure. Results: The mean follow-up period was 33.8 ± 15.0 months. Fracture reduction was good in 31 (75.6%) cases and acceptable in 8(19.5%) cases. Implant position was fair to good in 37 (90.2%) patients. The mean TAD was 26.1 ± 3.9 mm. Three patients developed SSI. Consolidation was achieved in 38 (92.6%) patients. The functional results were good to excellent in 80.5% of patients. The overall mortality rate was 7.3%. There were an association between mechanical failure and osteoporosis (p = 0.04), fracture reduction (p = 0.003), and TAD (p = 0.025). In multivariate logistic regression, no independent factors were predictive of mechanical failure. Conclusion: This study shows that ORIF using DHS for PFF via the Watson-Jones approach without an image intensifier can give satisfactory anatomical and functional outcomes in low-resource settings. It provides and validates a reliable and reproducible technique that deserves to be diffused to surgeons in austere areas over the world.

Biomechanical analysis of an absorbable material for treating fractures of the inferior orbital wall

AIM:To investigate the biomechanical properties and practical application of absorbable materials in orbital fracture repair.METHODS:The three-dimensional(3D)model of orbital blowout fractures was reconstructed using Mimics21.0 software.The repair guide plate model for inferior orbital wall fracture was designed using 3-matic13.0 and Geomagic wrap 21.0 software.The finite element model of orbital blowout fracture and absorbable repair plate was established using 3-matic13.0 and ANSYS Workbench 21.0 software.The mechanical response of absorbable plates,with thicknesses of 0.6 and 1.2 mm,was modeled after their placement in the orbit.Two patients with inferior orbital wall fractures volunteered to receive single-layer and double-layer absorbable plates combined with 3D printing technology to facilitate surgical treatment of orbital wall fractures.RESULTS:The finite element models of orbital blowout fracture and absorbable plate were successfully established.Finite element analysis(FEA)showed that when the Young’s modulus of the absorbable plate decreases to 3.15 MPa,the repair material with a thickness of 0.6 mm was influenced by the gravitational forces of the orbital contents,resulting in a maximum total deformation of approximately 3.3 mm.Conversely,when the absorbable plate was 1.2 mm thick,the overall maximum total deformation was around 0.4 mm.The half-year follow-up results of the clinical cases confirmed that the absorbable plate with a thickness of 1.2 mm had smaller maximum total deformation and better clinical efficacy.CONCLUSION:The biomechanical analysis observations in this study are largely consistent with the clinical situation.The use of double-layer absorbable plates in conjunction with 3D printing technology is recommended to support surgical treatment of infraorbital wall blowout fractures.

Hemiarthroplasty for irreparable distal radius fractures in the elderly:A comprehensive review

BACKGROUND Elderly patients maintaining functional independence can now be candidates for primary wrist hemiarthroplasty to manage acute irreparable distal radius fractures(DRFs).However,further investigation with long-term follow-up is required to validate these initial findings.AIM To review the literature on the outcomes of distal radius hemiarthroplasty with available implants to assess its viability as a treatment option.METHODS A comprehensive review of the literature was conducted using electronic databases,including PubMed,Medline,and Scopus.The search terms employed were"distal radius fracture","hemiarthroplasty","wrist arthroplasty",and related terminology.The search was restricted to articles published in English from 1980 until June 2023.Inclusion criteria encompassed cases or case series of DRF treated with hemiarthroplasty,providing clinical or radiographic outcomes,and published in peer-reviewed journals.RESULTS A total of 2508 articles from PubMed and 883 from Scopus were identified initially.Following screening and removal of duplicates,13 articles met the inclusion criteria.These articles,predominantly clinical retrospective studies,provided insights into hemiarthroplasty outcomes,including functional improvements and complications.Hemiarthroplasty was a treatment option for complex DRF,particularly those cases with severe comminution,intraarticular involvement,or severe osteoporosis.Functional outcomes demonstrated improvements in pain relief,wrist mobility,and grip strength,with variability across studies.Complications included implant loosening,infection,nerve injury,and stiffness,with varying incidence rates influenced by surgical techniques and implant choice.Long-term outcomes were inadequately documented,warranting further research.CONCLUSION Hemiarthroplasty is a promising treatment for irreparable DRF in the elderly.Long-term outcomes and complications require further study.