The microwave-assisted rock fragmentation has been proven to be a promising approach in reducing cutting tools wear and improving efficiency in rock crushing and excavation.Thus,understanding the influence of damage i...The microwave-assisted rock fragmentation has been proven to be a promising approach in reducing cutting tools wear and improving efficiency in rock crushing and excavation.Thus,understanding the influence of damage induced by microwave irradiation on rock fragmentation is necessary.In this context,cylindrical Fangshan granite(FG)specimens were exposed to microwave irradiation at a power of 6 kW for different durations up to 4.5 min.The damages of the specimens induced by irradiation were quantified by using both X-ray micro-CT scanning and ultrasonic wave measurement.The CT value and Pwave velocity decreased with increase of irradiation duration.The irradiated specimens were then tested using a split Hopkinson pressure bar(SHPB)system to simulate rock fragmentation.A momentum-trap technique was utilized to ensure single-pulse loading on the specimen in SHPB tests,enabling valid fragment size distribution(FSD)analysis.The dependence of dynamic uniaxial compressive strength(UCS)on the irradiation duration and loading rate was revealed.The dynamic UCS increased with increase of loading rate while decreased with increase of irradiation duration.Using the sieve analysis,three fragmentation types were proposed based on FSD,which were dictated by both loading rate and irradiation duration.In addition,an average fragment size was proposed to quantify FSD.The results showed that the average fragment size decreased with increase of loading rate.A loading rate range was identified,where a dramatic reduction of the average fragment size occurred.The dependence of fragmentation on the irradiation duration and loading rate was also discussed.展开更多
Fragmental size and distribution of explosive particles play a more important role in the formation of hot-spot than original particles size under drop weight impact.Because the particles breakage and the hot-spots ig...Fragmental size and distribution of explosive particles play a more important role in the formation of hot-spot than original particles size under drop weight impact.Because the particles breakage and the hot-spots ignition will form in a sequence between fragments and between the fragments and the drop weight surface under the impact.In this paper,the size and distribution of the cyclotetramethylenete tranitramine(HMX)fragments were analyzed by the Laser Particle Size Analyzer Malvern MS2000.The post-analysis results of fragments showed that size distribution of fragments was strongly dependent on drop height.An empirical formula is established to describe the relationship between the average size and drop height.The volume-based probability distribution of explosive fragments was also studied by experiments and theoretical calculations.展开更多
基金This research was supported by the National Natural Science Foundation of China(Nos.51704211 and 51879184).
文摘The microwave-assisted rock fragmentation has been proven to be a promising approach in reducing cutting tools wear and improving efficiency in rock crushing and excavation.Thus,understanding the influence of damage induced by microwave irradiation on rock fragmentation is necessary.In this context,cylindrical Fangshan granite(FG)specimens were exposed to microwave irradiation at a power of 6 kW for different durations up to 4.5 min.The damages of the specimens induced by irradiation were quantified by using both X-ray micro-CT scanning and ultrasonic wave measurement.The CT value and Pwave velocity decreased with increase of irradiation duration.The irradiated specimens were then tested using a split Hopkinson pressure bar(SHPB)system to simulate rock fragmentation.A momentum-trap technique was utilized to ensure single-pulse loading on the specimen in SHPB tests,enabling valid fragment size distribution(FSD)analysis.The dependence of dynamic uniaxial compressive strength(UCS)on the irradiation duration and loading rate was revealed.The dynamic UCS increased with increase of loading rate while decreased with increase of irradiation duration.Using the sieve analysis,three fragmentation types were proposed based on FSD,which were dictated by both loading rate and irradiation duration.In addition,an average fragment size was proposed to quantify FSD.The results showed that the average fragment size decreased with increase of loading rate.A loading rate range was identified,where a dramatic reduction of the average fragment size occurred.The dependence of fragmentation on the irradiation duration and loading rate was also discussed.
基金Science Challenging Program(TZ2016001)the National Natural Science Foundation of China(11572045,11472051)Innovative Group of Material and Structure Impact Dynamics(11521062)。
文摘Fragmental size and distribution of explosive particles play a more important role in the formation of hot-spot than original particles size under drop weight impact.Because the particles breakage and the hot-spots ignition will form in a sequence between fragments and between the fragments and the drop weight surface under the impact.In this paper,the size and distribution of the cyclotetramethylenete tranitramine(HMX)fragments were analyzed by the Laser Particle Size Analyzer Malvern MS2000.The post-analysis results of fragments showed that size distribution of fragments was strongly dependent on drop height.An empirical formula is established to describe the relationship between the average size and drop height.The volume-based probability distribution of explosive fragments was also studied by experiments and theoretical calculations.