Model Free Adaptive Predictive Control of Desulfurization Slurry pH Based on CPS Framework

In order to improve the slurry pH control accuracy of the absorption tower in the wet flue gas desulfurization process,a model free adaptive predictive control algorithm for the desulfurization slurry pH which is based on a cyber physical systems framework is proposed.First,aiming to address system characteristics of non-linearity and pure hysteresis in slurry pH change process,a model free adaptive predictive control algorithm based on compact form dynamic linearization is proposed by combining model free adaptive control algorithm with model predictive control algorithm.Then,by integrating information resources with the physical resources in the absorption tower slurry pH control process,an absorption tower slurry pH optimization control system based on cyber physical systems is constructed.It is turned out that the model free adaptive predictive control algorithm under the framework of the cyber physical systems can effectively realize the high-precision tracking control of the slurry pH of the absorption tower,and it has strong robustness.

Study of measurement and control of free loop of hot steel strip in twin-roll strip casting

In the twin-roll strip casting process, hot cast strips can be broken or tom if the casting speed does not match the rolling speed. Usually, a certain length of hot steel strip is hung freely between the caster and rolling mill to deal with the effect of this speed difference. In this paper,the freely hanging hot steel strip is referred to as the free loop of hot steel strip. Accurately measuring and controlling the height of this free loop is the key factor in maintaining a stable casting operation. Several methods for measuring the loop height of a steel strip are discussed and a method for accurately measuring and controlling the free loop height of hot steel strip is presented. Based on the results of the casting loop quantity change curve, this control method is confirmed to be effective and able to meet the requirements of continuous casting strip production.

Regional selection of insecticides and fungal biopesticides to control aphids and thrips and improve the forage quality of alfalfa crops

The efficacies of biological and conventional chemical insecticides against two major insect pests of alfalfa(aphids and thrips)were compared in three sites across China’s alfalfa belt.In addition,the persistence of the residues of chemical insecticides in alfalfa and their influence on the quality of alfalfa hay were examined.Efficacy varied among the different biological and chemical insecticides.The chemical insecticides were significantly more effective than biopesticides in a short time-frame.The efficacy period of biopesticides was significantly longer than that of chemical insecticides,and the corrected mortality rate of aphids in all regions was above 50%at 14 days after application.The analysis of pesticide residues showed that the residual doses of all the pesticides were within the allowed ranges after the safe period.The acid detergent fiber and neutral detergent fiber contents in alfalfa hay were higher and the protein content was lower in chemical insecticide treatments than in biopesticide treatments in Hebei.The relative feeding value of alfalfa hay treated with Metarhizium anisopliae IPP330189 was the highest among the treatments.Compared with chemical insecticides,the yield of alfalfa hay was higher in the biopesticides treatments.Biopesticides show a stronger control effect on insect populations and also a better improvement in the quality of alfalfa hay than chemical insecticides.This study provides a basis for exploring and developing a comprehensive control regime for alfalfa insect pests in the different alfalfa-growing regions in China,and for reducing chemical insecticide usage and improving forage quality.

Computational mission analysis and conceptual system design for super low altitude satellite

This paper deals with system engineering and design methodology for super low altitude satel ites in the view of the com-putational mission analysis. Due to the slight advance of imaging instruments, such as the focus of camera and the image element of charge coupled device （CCD）, it is an innovative and economical way to improve the camera’s resolution to enforce the satel ite to fly on the lower altitude orbit. DFH-3, the mature satel ite bus de-veloped by Chinese Academy of Space Technology, is employed to define the mass and power budgets for the computational mis-sion analysis and the detailed engineering design for super low altitude satel ites. An effective iterative algorithm is proposed to solve the ergodic representation of feasible mass and power bud-gets at the flight altitude under constraints. Besides, boundaries of mass or power exist for every altitude, where the upper boundary is derived from the maximum power, while the minimum thrust force holds the lower boundary before the power reaching the initial value. What’s more, an analytical algorithm is employed to numerical y investigate the coverage percentage over the altitude, so that the nominal altitude could be selected from al the feasi-ble altitudes based on both the mass and power budgets and the repetitive ground traces. The local time at the descending node is chosen for the nominal sun-synchronous orbit based on the average evaluation function. After determining the key orbital ele-ments based on the computational mission analysis, the detailed engineering design on the configuration and other subsystems, like power, telemetry telecontrol and communication （TT＆amp;C）, and attitude determination and control system （ADCS）, is performed based on the benchmark bus, besides, some improvements to the bus are also implemented to accommodate the flight at a super low altitude. Two operation strategies, drag-free closed-loop mode and on/off open-loop mode, are presented to maintain the satel-lite’s altitude. Final y, a flight planning schedule for the satel ite is demonstrated from its launch into the initial altitude at the very beginning to its decay to death in the end.

Cicada(Tibicen linnei) steers by force vectoring

To change flight direction, flying animals modulate aerodynamic force either relative to their bodies to generate torque about the center of mass, or relative to the flight path to produce centripetal force that curves the trajectory. In employing the latter, the direction of aerodynamic force remains fixed in the body flame and rotations of the body redirect the force. While both aforementioned techniques are essential for flight, it is critical to investigate how an animal balances the two to achieve aerial locomotion. Here, we measured wing and body kinematics of cicada （Tibicen linnei） in flee flight, including flight periods of both little and substantial body reorientations. It is found that cicadas employ a common force vectoring technique to execute all these flights. We show that the direction of the half-stroke averaged aerodynamic force relative to the body is independent of the body orientation, varying in a range of merely 20 deg. Despite directional limitation of the aerodynamic force, pitch and roll torque are generated by altering wing angle of attack and its mean position relative to the center of mass. This results in body rotations which redirect the wing force in the global flame and consequently change the flight traiectorv.

Protecting the photosynthetic performance of snap bean under free air ozone exposure

Tropospheric ozone（O3） is a major air pollutant and causes serious injury to vegetation. To protect sensitive plants from O3 damage, several agrochemicals have been assessed,including cytokinin（e.g., kinetin, KIN） and ethylenediurea（EDU） with cytokinin-like activity.In higher plant, leaves are primarily injured by O3 and protective agrochemicals are often applied by leaf spraying. To our knowledge, the mitigating abilities of EDU and KIN have not been compared directly in a realistic setup. In the present research, impacts of elevated O3（2 × ambient O3, 24 hr per day, for 8 days） on an O3 sensitive line（S156） of snap bean（Phaseolus vulgaris）, which is often used for biomonitoring O3 pollution, were studied in a free air controlled exposure system. The day before starting the O3 exposure, plants were sprayed with a solution of EDU（300 ppm）, KIN（1 mmol/L） or distilled water, to compare their protective abilities. The results demonstrated that 2 × ambient O3 inhibited net photosynthetic rate and stomatal conductance, increased the minimal fluorescence yield of the dark-adapted state, decreased the maximal quantum yield of PSII photochemistry, and led to visible injury. KIN and EDU alleviated the reduction of the photosynthetic performance, and visible injury under O3 fumigation. The plants sprayed with EDU showed greater ability to mitigate the O3 damage than those sprayed with KIN. Chlorophyll fluorescence imaging may have detected more precisely the differences in O3 response across the leaf than the conventional fluorometer.

Design and Application of Novel Dispersants for Coatings and Other System

1 Results Dispersants are defined as liquids or gases that can be added to a mixture to promote dispersion or to maintain dispersed particles in suspension. A good dispersant not only helps to provide good dispersion, but also good performance, stability and rheological properties. Therefore, dispersants are widely used in many applications such as coating, ink, electronic materials, plastics, and so on[1]. There are different ways to categorize the many dispersants available on the market. From a molec...

How Does Vocabulary Knowledge Affect Chinese EFL Learners' Writing Quality in Web-based Settings?—Evaluating the Relationships Among Three Dimensions of Vocabulary Knowledge and Writing Quality

This study investigated the relationships among different dimensions of vocabulary knowledge （passive, controlled active and free active vocabulary knowledge） and how they affect EFL learners＇ writing quality. Participants were a whole class of web-based English learners （N = 31） of tertiary level in the Chinese mainland. The results show that free active （above 2000） vocabulary knowledge has a much stronger correlation with controlled active than passive vocabulary knowledge, and writing quality has a stronger correlation with free active vocabulary knowledge than with the other two dimensions of vocabulary knowledge.