The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for t...The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.展开更多
Itis proved that for ε≥0 and δ≥0 the two -point boundary value problemhas a unique solution (y(t,ε,δ),z(t,ε,δ)) under certain hypotheses with the aid of the appropriate Green's function integral operator....Itis proved that for ε≥0 and δ≥0 the two -point boundary value problemhas a unique solution (y(t,ε,δ),z(t,ε,δ)) under certain hypotheses with the aid of the appropriate Green's function integral operator.The unique solution (ξ,η,v.(s)) of the free boundary problem is constructed utilizing the solution (y(t,ε.0),z(t,ε,0)).The fine boundary problem is shown to be a singular perturbation problem when the function k(t) possesses intervals of degeneracy展开更多
The melting point, spreading property, mechanical properties and microstructures of Sn-3.0Ag-2.8Cu solder alloys added with micro-variable-Ce were studied by means of optical microscopy, scanning electron microscopy(S...The melting point, spreading property, mechanical properties and microstructures of Sn-3.0Ag-2.8Cu solder alloys added with micro-variable-Ce were studied by means of optical microscopy, scanning electron microscopy(SEM) and energy dispersive X-ray(EDX). The results indicate that the melting point of Sn-3.0Ag-2.8Cu solder is enhanced by Ce addition; a small amount of Ce will remarkably prolong the creep-rupture life of Sn-3.0Ag-2.8Cu solder joint at room temperature, especially when the content of Ce is 0.1%, the creep-rupture life will be 9 times or more than that of the solder joint without Ce addition; the elongation of Sn-3.0Ag-2.8Cu solder is also obviously improved even up to 15.7%. In sum, the optimum content of Ce is within 0.05%-0.1 %.展开更多
As the stiffness of the elastic support varies with the physical-chemical erosion and mechanical friction, model catastrophe of a single degree-of-freedom(DOF) isolation system may occur. A 3-DOF four-point-elastic-su...As the stiffness of the elastic support varies with the physical-chemical erosion and mechanical friction, model catastrophe of a single degree-of-freedom(DOF) isolation system may occur. A 3-DOF four-point-elastic-support rigid plate(FERP) structure is presented to describe the catastrophic isolation system. Based on the newly-established structure, theoretical derivation for stiffness matrix calculation by free response(SMCby FR) and the method of stiffness identification by stiffness matrix disassembly(SIby SMD)are proposed. By integrating the SMCby FR and the SIby SMD and defining the stiffness assurance criterion(SAC), the procedures for stiffness identification of a FERP structure(SIFERP) are summarized. Then, a numerical example is adopted for the SIFERP validation, in which the simulated tested free response data are generated by the numerical methods, and operation for filtering noise is conducted to imitate the practical application. Results in the numerical example demonstrate the feasibility and accuracy of the developed SIFERP for stiffness identification.展开更多
The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resol...The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resolution of seismic data, and free boundary can cause surface wave. Considering the above problems, we focus on the Rayleigh wavefields simulation using finite-difference wave equation of higher-order staggered grids and PML boundary conditions. Free boundary, buried source and overlying low velocity layer are taken into consideration and point explosion source is adopted. Through some numerical simulation with different parameters, we quantitatively analyze relationship between wave intensity and source depth, as well as the energy variation with propagation and obtain some practical knowledge and conclusions.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No.10872163)the Natural Science Foundation of Education Department of Shaanxi Province (Grant No.08JK394)
文摘The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.
文摘Itis proved that for ε≥0 and δ≥0 the two -point boundary value problemhas a unique solution (y(t,ε,δ),z(t,ε,δ)) under certain hypotheses with the aid of the appropriate Green's function integral operator.The unique solution (ξ,η,v.(s)) of the free boundary problem is constructed utilizing the solution (y(t,ε.0),z(t,ε,0)).The fine boundary problem is shown to be a singular perturbation problem when the function k(t) possesses intervals of degeneracy
基金Project(2002E111) supported by the National Basic Research Priorities Program of Shanxi Province, ChinaPorject(03JC14) supported by the Industry Project of Shanxi Province Education, China
文摘The melting point, spreading property, mechanical properties and microstructures of Sn-3.0Ag-2.8Cu solder alloys added with micro-variable-Ce were studied by means of optical microscopy, scanning electron microscopy(SEM) and energy dispersive X-ray(EDX). The results indicate that the melting point of Sn-3.0Ag-2.8Cu solder is enhanced by Ce addition; a small amount of Ce will remarkably prolong the creep-rupture life of Sn-3.0Ag-2.8Cu solder joint at room temperature, especially when the content of Ce is 0.1%, the creep-rupture life will be 9 times or more than that of the solder joint without Ce addition; the elongation of Sn-3.0Ag-2.8Cu solder is also obviously improved even up to 15.7%. In sum, the optimum content of Ce is within 0.05%-0.1 %.
基金Project(51221462)supported by the National Natural Science Foundation of ChinaProject(20120095110001)supported by the PhD Programs Foundation of Ministry of Education of ChinaProject(CXZZ13_0927)supported by Research and Innovation Project for College Graduates of Jiangsu Province,China
文摘As the stiffness of the elastic support varies with the physical-chemical erosion and mechanical friction, model catastrophe of a single degree-of-freedom(DOF) isolation system may occur. A 3-DOF four-point-elastic-support rigid plate(FERP) structure is presented to describe the catastrophic isolation system. Based on the newly-established structure, theoretical derivation for stiffness matrix calculation by free response(SMCby FR) and the method of stiffness identification by stiffness matrix disassembly(SIby SMD)are proposed. By integrating the SMCby FR and the SIby SMD and defining the stiffness assurance criterion(SAC), the procedures for stiffness identification of a FERP structure(SIFERP) are summarized. Then, a numerical example is adopted for the SIFERP validation, in which the simulated tested free response data are generated by the numerical methods, and operation for filtering noise is conducted to imitate the practical application. Results in the numerical example demonstrate the feasibility and accuracy of the developed SIFERP for stiffness identification.
基金support of the Major National Science and Technology Projects(No.2011ZX05006-002)the Fundamental Research Funds for the Central Universities of China(No.09CX04009A)
文摘The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resolution of seismic data, and free boundary can cause surface wave. Considering the above problems, we focus on the Rayleigh wavefields simulation using finite-difference wave equation of higher-order staggered grids and PML boundary conditions. Free boundary, buried source and overlying low velocity layer are taken into consideration and point explosion source is adopted. Through some numerical simulation with different parameters, we quantitatively analyze relationship between wave intensity and source depth, as well as the energy variation with propagation and obtain some practical knowledge and conclusions.
