Electrochemical liftoff of freestanding GaN by a thick highly conductive sacrificial layer grown by HVPE

Separation technology is an indispensable step in the preparation of freestanding GaN substrate. In this paper, a largearea freestanding GaN layer was separated from the substrate by an electrochemical liftoff process on a sandwich structure composed of an Fe-doped GaN substrate, a highly conductive Si-doped sacrificial layer and a top Fe-doped layer grown by hydride vapor phase epitaxy(HVPE). The large difference between the resistivity in the Si-doped layer and Fe-doped layer resulted in a sharp interface between the etched and unetched layer. It was found that the etching rate increased linearly with the applied voltage, while it continuously decreased with the electrochemical etching process as a result of the mass transport limitation. Flaky GaN pieces and nitrogen gas generated from the sacrificial layer by electrochemical etching were recognized as the main factors responsible for the blocking of the etching channel. Hence, a thick Si-doped layer grown by HVPE was used as the sacrificial layer to alleviate this problem. Moreover, high temperature and ultrasonic oscillation were also found to increase the etching rate. Based on the results above, we succeeded in the liftoff of ~ 1.5 inch GaN layer. This work could help reduce the cost of freestanding GaN substrate and identifies a new way for mass production.

11.2 W/mm power density AlGaN/GaN high electron-mobility transistors on a GaN substrate

In this letter,high power density AlGaN/GaN high electron-mobility transistors(HEMTs)on a freestanding GaN substrate are reported.An asymmetricΓ-shaped 500-nm gate with a field plate of 650 nm is introduced to improve microwave power performance.The breakdown voltage(BV)is increased to more than 200 V for the fabricated device with gate-to-source and gate-to-drain distances of 1.08 and 2.92μm.A record continuous-wave power density of 11.2 W/mm@10 GHz is realized with a drain bias of 70 V.The maximum oscillation frequency(f_(max))and unity current gain cut-off frequency(f_(t))of the AlGaN/GaN HEMTs exceed 30 and 20 GHz,respectively.The results demonstrate the potential of AlGaN/GaN HEMTs on freestanding GaN substrates for microwave power applications.

Light-extraction enhancement of freestanding GaN-based flip-chip light-emitting diodes using two-step roughening methods

The light extraction enhancement of freestanding GaN-based flip-chip light-emitting diodes （FS- FCLEDs） using two-step roughening methods is investigated. The output power of LEDs fabricated by using one-step and two-step roughening methods are compared. The results indicate that two-step roughening meth- ods show more potential for light extraction. Compared with flat FS-FCLEDs, the output power of FS-FCLEDs with a nanotextured hemisphere surface shows an enhancement of 90.7%.