Studies on Suction-Assisted Installation Behavior of Suction Caissons in Clay Under Various Undrained Shear Strengths

Suction caissons are widely used for anchoring floating platform and offshore wind turbines.Penetration of the suction caisson into the desired position under the combination of its self-weight and applied suction resulted from pumping out the encased water is integral to practical engineering.Model tests were carried out to investigate the suctionassisted installation of suction caissons in clay under various undrained shear strengths.It was found that there exists a critical penetration depth value.When the penetration depth is smaller than the critical value,the soil plug undrained shear strength is higher than intact clay(i.e.,clay prior to installation).However,when the penetration depth is greater than the critical penetration depth,the undrained shear strength of soil plug is lower than intact clay.The critical value decreases with the increasing consolidation time and undrained shear strength of clay.During suction-assisted installation,cracks occur around suction caissons.The installation way has little effect on the crack formation.The influence range(i.e.,the maximum distance between the crack and the suction caisson edge)was found to increase with the increasing friction coefficient of interface between the suction caisson wall and soil and decreases with the increasing soil undrained shear strength.In addition,the drained condition of the clay during installation is dominated by the caisson aspect ratio,the undrained shear strength and the friction coefficient between the caisson wall and clay.Equations to estimate the penetration resistance and the required suction to install the suction caisson are summarized.

A Study on the Shear Strength Characteristic of Unsaturated Red Clay

The red clay in Chenzhou, Hunan province is mostly in unsaturated state. Simply applying the mechanical properties that derived from classic saturated soil mechanics often leads to slope failures in this region. In order to study the shear strength characteristic of unsaturated red clay in Chenzhou and to explore a shear strength equation that can be easily applied in engineering practice, a series of triaxial tests of saturated and unsaturated red clay samples were performed using the regular triaxial testing apparatus. The testing results show that the peak strength of red clay drops slightly before the moisture content of 30% but decreases sharply after that. The friction angle of red clay under unsaturated state is basically equal to the effective friction angle under saturated state, while the cohesion of unsaturated red clay is far much bigger than that of saturated one, which indicates that the matric suction makes a great contribution to the cohesion. By fitting the testing results with appropriate curves, the relationships between total strength parameters and with moisture content were obtained. The total increases logarithmically before the moisture content of 35% then decreases linearly, while decreases cubically with increasing moisture content.