In this paper, the reduced-order modeling （ROM） technology and its corresponding linear theory are expanded from the linear dynamic system to the nonlinear one, and H∞ control theory is employed in the frequency do...In this paper, the reduced-order modeling （ROM） technology and its corresponding linear theory are expanded from the linear dynamic system to the nonlinear one, and H∞ control theory is employed in the frequency domain to design some nonlinear system＇ s pre-compensator in some special way. The adaptive model inverse control （AMIC）theory coping with nonlinear system is improved as well. Such is the model reference adaptive inverse control with pre-compensator （PCMRAIC）. The aim of that algorithm is to construct a strategy of control as a whole. As a practical example of the application, the nunlerical simulation has been given on matlab software packages. The numerical result is given. The proposed strategy realizes the linearization control of nonlinear dynamic system. And it carries out a good performance to deal with the nonlinear system.展开更多
Associated with ITU-T G.719,a post-processing method in frequency domain for enhancing the perceptual quality of the decoded transient audio is proposed only to the audio decoder with no side information from the enco...Associated with ITU-T G.719,a post-processing method in frequency domain for enhancing the perceptual quality of the decoded transient audio is proposed only to the audio decoder with no side information from the encoder.The proposed post-filter is used to filter the frequency coefficients of the decoded transient frame and consists of a short-term post-filter and a spectral tilt compensation filter which are derived from linear predictive coding（LPC） predictor based on the discrete cosine transform（DCT） coefficients of the decoded transient frame.As a result,the post-filter in frequency domain shapes the temporal noise in time domain and controls the pre-echo noise effectively while enhancing the transient perception.Listening test results show that the preferring ratio of the post-processed transient signal is higher than that of the original decoded signal at a low bit rate of 32 kbit/s in G.719 and the post-processing module brings a complexity of 12.399 WMOPS to the decoder.展开更多
基金Supported by the National Defense Base Research Foundation (No. 40104030102),and the Postdoctoral Foundation of Heilongjiang Province
文摘In this paper, the reduced-order modeling （ROM） technology and its corresponding linear theory are expanded from the linear dynamic system to the nonlinear one, and H∞ control theory is employed in the frequency domain to design some nonlinear system＇ s pre-compensator in some special way. The adaptive model inverse control （AMIC）theory coping with nonlinear system is improved as well. Such is the model reference adaptive inverse control with pre-compensator （PCMRAIC）. The aim of that algorithm is to construct a strategy of control as a whole. As a practical example of the application, the nunlerical simulation has been given on matlab software packages. The numerical result is given. The proposed strategy realizes the linearization control of nonlinear dynamic system. And it carries out a good performance to deal with the nonlinear system.
基金Supported by the Cooperation Between BIT and Ericsson
文摘Associated with ITU-T G.719,a post-processing method in frequency domain for enhancing the perceptual quality of the decoded transient audio is proposed only to the audio decoder with no side information from the encoder.The proposed post-filter is used to filter the frequency coefficients of the decoded transient frame and consists of a short-term post-filter and a spectral tilt compensation filter which are derived from linear predictive coding（LPC） predictor based on the discrete cosine transform（DCT） coefficients of the decoded transient frame.As a result,the post-filter in frequency domain shapes the temporal noise in time domain and controls the pre-echo noise effectively while enhancing the transient perception.Listening test results show that the preferring ratio of the post-processed transient signal is higher than that of the original decoded signal at a low bit rate of 32 kbit/s in G.719 and the post-processing module brings a complexity of 12.399 WMOPS to the decoder.
