Integrated interpretation of dual frequency induced polarization measurement based on wavelet analysis and metal factor methods

In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When the target geology structure is significantly complicated, these parameters would fail to reflect the nature of the anomaly source, and wrong conclusions may be obtained. A wavelet approach and a metal factor method were used to comprehensively interpret the induced polarization anomaly of complex geologic bodies in the Adi Bladia mine. Db5 wavelet basis was used to conduct two-scale decomposition and reconstruction, which effectively suppress the noise interference of greenschist facies regional metamorphism and magma intrusion, making energy concentrated and boundary problem unobservable. On the basis of that, the ore-induced anomaly was effectively extracted by the metal factor method.

Application of pseudo-random frequency domain electromagnetic method in mining areas with strong interferences

Due to the strong electromagnetic interferences and human interference,traditional electromagnetic methods cannot obtain high quality resistivity data of mineral deposits in Chinese mines.The wide field electromagnetic method(WFEM),in which the pseudo-random signal is taken as the transmitter source,can extract high quality resistivity data in areas with sever interference by only measuring the electric field component.We use the WFEM to extract the resistivity information of the Dongguashan mine in southeast China.Compared with the audio magnetotelluric(AMT)method,and the controlled source audio-frequency magnetotelluric(CSAMT) method,the WFEM can obtain data with higher quality and simpler operations.The inversion results indicate that the WFEM can accurately identify the location of the main ore-body,which can be used for deep mine exploration in areas with strong interference.

Fatigue crack growth rate test using a frequency sweep method

Fatigue crack propagation characteristics of a diesel engine crankshaft are studied by measuring the fatigue crack growth rate using a frequency sweep method on a resonant fatigue test rig. Based on the phenomenon that the system frequency will change when the crack becomes large, this method can be directly applied to a complex component or structure. Finite element analyses （FEAs） are performed to calibrate the relation between the frequency change and the crack size, and to obtain the natural frequency of the test rig and the stress intensity factor （SIF） of growing cracks. The crack growth rate i.e. da/dN-AK of each crack size is obtained by combining the testing-time monitored data and FEA results. The results show that the crack growth rate of engine crankshaft, which is a component with complex geometry and special surface treatment, is quite different from that of a pure material. There is an apparent turning point in the Paris＇s crack partition. The cause of the fatigue crack growth is also discussed.

Harmonic balance method with alternating frequency/time domain technique for nonlinear dynamical system with fractional exponential

Comparisons of the common methods for obtaining the periodic responses show that the harmonic balance method with alternating frequency/time （HB-AFT） do- main technique has some advantages in dealing with nonlinear problems of fractional exponential models. By the HB-AFT method, a rigid rotor supported by ball bearings with nonlinearity of Hertz contact and ball passage vibrations is considered. With the aid of the Floquet theory, the movement characteristics of interval stability are deeply studied. Besides, a simple strategy to determine the monodromy matrix is proposed for the stability analysis.

Measurement of remanent magnetic moment using a torsion pendulum with single frequency modulation method

In Tian Qin spaceborne gravitational-wave detectors, the stringent requirements on the magnetic cleanliness of the test masses demand the high resolution ground-based characterization measurement of their magnetic properties. Here we present a single frequency modulation method based on a torsion pendulum to measure the remanent magnetic moment mr of 1.1 kg dummy copper test mass, and the measurement result is(6.45 ± 0.04(stat) ± 0.07(syst)) × 10^(-8)A · m^(2). The measurement precision of the mr is about 0.9 n A · m^(2), well below the present measurement requirement of Tian Qin. The method is particularly useful for measuring extremely low magnetic properties of the materials for use in the construction of space-borne gravitational wave detection and other precision scientific apparatus.

Modal Identification of Offshore Platforms Using Statistical Method Based on ERA

Identification of modal parameters of a linear structure with output-only measurements has received much attention over the past decades. In the paper, the Natural Excitation Technique (NExT) is used for acquisition of the impulse signals from the structural responses. Then Eigensystem Realization Algorithm (ERA) is utilized for modal identification. For disregarding the fictitious ‘computational modes', a procedure, Statistically Averaging Modal Frequency Method (SAMFM), is developed to distinguish the true modes from noise modes, and to improve the precision of the identified modal frequencies of the structure. An offshore platform is modeled with the finite element method. The theoretical modal parameters are obtained for a comparison with the identified values. The dynamic responses of the platform under random wave loading are computed for providing the output signals used for identification with ERA. Results of simulation demonstrate that the proposed method can determine the system modal frequency with high precision.

Experimental Investigation on Electromagnetic Attenuation by Low Pressure Radio-Frequency Plasma for Cavity Structure

This paper reports on an experiment designed to test electromagnetic（EM）attenuation by radio-frequency（RF）plasma for cavity structures.A plasma reactor,in the shape of a hollow cylinder,filled with argon gas at low pressure,driven by a RF power source,was produced by wave-transmitting material.The detailed attenuations of EM waves were investigated under different conditions：the incident frequency is 1-4 GHz,the RF power supply is 13.56 MHz and1.6（-3） k W,and the argon pressure is 75-200 Pa.The experimental results indicate that 5-15 d B return loss can be obtained.From a first estimation,the electron density in the experiment is approximately（1.5-2.2）×1016m（-3）and the collision frequency is about 11（-3）0 GHz.The return loss of EM waves was calculated using a finite-difference time-domain（FDTD）method and it was found that it has a similar development with measurement.It can be confirmed that RF plasma is useful in the stealth of cavity structures such as jet-engine inlet.

Frequency Weighting Filter Design for Automotive Ride Comfort Evaluation

Few study gives guidance to design weighting filters according to the frequency weighting factors,and the additional evaluation method of automotive ride comfort is not made good use of in some countries.Based on the regularities of the weighting factors,a method is proposed and the vertical and horizontal weighting filters are developed.The whole frequency range is divided several times into two parts with respective regularity.For each division,a parallel filter constituted by a low-and a high-pass filter with the same cutoff frequency and the quality factor is utilized to achieve section factors.The cascading of these parallel filters obtains entire factors.These filters own a high order.But,low order filters are preferred in some applications.The bilinear transformation method and the least P-norm optimal infinite impulse response（IIR） filter design method are employed to develop low order filters to approximate the weightings in the standard.In addition,with the window method,the linear phase finite impulse response（FIR） filter is designed to keep the signal from distorting and to obtain the staircase weighting.For the same case,the traditional method produces 0.330 7 m · s^–2 weighted root mean square（r.m.s.） acceleration and the filtering method gives 0.311 9 m · s^–2 r.m.s.The fourth order filter for approximation of vertical weighting obtains 0.313 9 m · s^–2 r.m.s.Crest factors of the acceleration signal weighted by the weighting filter and the fourth order filter are 3.002 7 and 3.011 1,respectively.This paper proposes several methods to design frequency weighting filters for automotive ride comfort evaluation,and these developed weighting filters are effective.

A novel method for integrating chromatographic fingerprint analytical units of Chinese materia medica:the matching frequency statistical moment method

Objective To facilitate the quality evaluation suitable for the unique characteristics of Chinese materia medica(CMM)by developing and implementing a novel approach known as the matching frequency statistical moment(MFSM)method.Methods This study established the MFSM method.To demonstrate its effectiveness,we applied this novel approach to analyze Danxi Granules(丹膝颗粒,DXG)and its constituent herbal materials.To begin with,the ultra-performance liquid chromatography(UPLC)was applied to obtain the chromatographic fingerprints of DXG and its constituent herbal materi-als.Next,the MFSM was leveraged to compress and integrate them into a new fingerprint with fewer analytical units.Then,we characterized the properties and variability of both the original and integrated fingerprints by calculating total quantum statistical moment(TQSM)parameters,information entropy and information amount,along with their relative standard deviation(RSD).Finally,we compared the TQSM parameters,information entropy and infor-mation amount,and their RSD between the traditional and novel fingerprints to validate the new analytical method.Results The chromatographic peaks of DXG and its 12 raw herbal materials were divided and integrated into peak families by the MFSM method.Before integration,the ranges of the peak number,three TQSM parameters,information entropy and information amount for each peak or peak family of UPLC fingerprints of DXG and its 12 raw herbal materials were 95.07−209.73,9390−183064μv·s,5.928−21.33 min,22.62−106.69 min^(2),4.230−6.539,and 50530−974186μv·s,respectively.After integration,the ranges of these parameters were 10.00−88.00,9390−183064μv·s,5.951−22.02 min,22.27−104.73 min^(2),2.223−5.277,and 38159−807200μv·s,respectively.Correspondingly,the RSD of all the aforementioned pa-rameters before integration were 2.12%−9.15%,6.04%−49.78%,1.15%−23.10%,3.97%−25.79%,1.49%−19.86%,and 6.64%−51.20%,respectively.However,after integration,they changed to 0.00%,6.04%−49.87%,1.73%−23.02%,3.84%−26.85%,1.17%−16.54%,and 6.40%−48.59%,respectively.The results demonstrated that in the newly integrated fingerprint,the analytical units of constituent herbal materials,information entropy and information amount were significantly reduced(P<0.05),while the TQSM parameters remained unchanged(P>0.05).Additionally,the RSD of the TQSM parameters,information entropy,and information amount didn’t show significant difference before and after integration(P>0.05),but the RSD of the number and area of the integrated analytical units significantly decreased(P<0.05).Conclusion The MFSM method could reduce the analytical units of constituent herbal mate-rials while maintain the properties and variability from their original fingerprint.Thus,it could serve as a feasible and reliable tool to reduce difficulties in analyzing multi-compo-nents within CMMs and facilitating the evaluation of their quality.

Methods to Improve the Long Distance Time-Varying Channel Transmission Performance of Expendable Profiler

To improve the transmission performance of XCTD channel, this paper proposes a method to measure directly and fit the channel transmission characteristics by using frequency sweeping method. Sinusoidal signals with a frequency range of 100 Hz to 10 k Hz and an interval of 100 Hz are used to measure transmission characteristics of channels with lengths of 300 m, 800 m, 1300 m, and 1800 m. The correctness of the fitted channel characteristics by transmitting square wave, composite waves of different frequencies, and ASK modulation are verified. The results show that when the frequency of the signal is below 1500 Hz, the channel has very little effect on the signal. The signal compensated for amplitude and phase at the receiver is not as good as the uncompensated signal.Alternatively, when the signal frequency is above 1500 Hz, the channel distorts the signal. The quality of signal compensated for amplitude and phase at receiver is better than that of the uncompensated signal. Thus, we can select the appropriate frequency for XCTD system and the appropriate way to process the received signals. Signals below1500 Hz can be directly used at the receiving end. Signals above 1500 Hz are used after amplitude and phase compensation at the receiving end.

Harmonic Balance Methods:A Review and Recent Developments

The harmonic balance(HB)method is one of the most commonly used methods for solving periodic solutions of both weakly and strongly nonlinear dynamical systems.However,it is confined to low-order approximations due to complex symbolic operations.Many variants have been developed to improve the HB method,among which the time domain HB-like methods are regarded as crucial improvements because of their fast computation and simple derivation.So far,there are two problems remaining to be addressed.i)A dozen of different versions of HB-like methods,in frequency domain or time domain or in hybrid,have been developed;unfortunately,misclassification pervades among them due to the unclear borderlines of different methods.ii)The time domain HB-like methods suffer from non-physical solutions,which have been shown to be caused by aliasing(mixture of the high-order into the low-order harmonics).Although a series of dealiasing techniques have been developed over the past two decades,the mechanism of aliasing and the final solution to dealiasing are still not well known to the academic community.This paper aims to provide a comprehensive review of the development of HB-like methods and enunciate their principal differences.In particular,the time domain methods are emphasized with the famous aliasing phenomenon clearly addressed.

A Data Transmission Method Using a Cyclic Redundancy Check and Inaudible Frequencies

This paper describes a data transmission method using a cyclic redundancy check and inaudible frequencies.The proposed method uses inaudible high frequencies from 18 k Hz to 22 k Hz generated via the inner speaker of smart devices.Using the proposed method,the performance is evaluated by conducting data transmission tests between a smart book and smart phone.The test results confirm that the proposed method can send 32 bits of data in an average of 235 ms,the transmission success rate reaches 99.47%,and the error detection rate of the cyclic redundancy check is0.53%.

THE CHARACTERISTICS OF THUNDERSTORM FREQUENCY VARIATION AND THEIR POSSIBLE RELATION WITH THE ADJUSTMENT OF CROP DISTRIBUTION IN THE LEIZHOU PENINSULA

In order to research possible influences of the adjustment of plant distribution on the development frequency of thunderstorms over the Leizhou Peninsula, mathematic statistic methods, including correlation analyses, 11 kinds of fitting models and all-variable regression methods, were used for analyses and research. The results show that the average trend of the number of annual thunderstorm days is descending obviously, and there are thunderstorms in all seasons, in which warm post-midday thunderstorms have taken up the most part, and high frequency is found from May to September, and the starting and ending dates of thunderstorms have a great annual discrepancy. The vegetation structure has been improved along with the reduction of rice fields and the area increment of sugarcane and fruits planting, which results in the decrease of the number of thunderstorm days; the change in the characteristics of winter spare fields, which is caused by the planting of vegetables, limits the formation of thunderstorms in early winter and late spring. Meanwhile, the area adjustment of peanut planting has little influence on the variation of thunderstorm days. The adjustment of principal crop distribution, such as rice, sugarcane, fruits and vegetables, may have obvious influence on the formation of thunderstorms, and sugarcane has the largest effect, followed in turn by rice, vegetables and fruits, and the adjustment of crop distribution has little influence on the starting and ending dates of thunderstorms.

Application of integrated geophysical techniques in geothermal exploration in Binhai County, Jiangsu Province

Integrated geophysical technology is a necessary and effective means for geothermal exploration.However,integration of geophysical technology for large‐scale surveys with those for geothermal reservoir localization is still in development.This study used the controlled source audio‐frequency magnetotelluric method technology for large‐scale exploration to obtain underground electrical structure information and micromotion detection technology to obtain underground wave velocity structure information.The combination of two detection technologies was used for local identification of geothermal reservoirs.Further,auxiliary correction and inversion constraint were implemented through the audio magnetotelluric sounding technology for maximum authenticity restoration of the near‐and transition‐field data.Through these technology improvements,a geothermal geological model was established for the Binhai County of Jiangsu Province in China and potential geothermal well locations were identified.On this basis,a geothermal well was drilled nearly 3000m deep,with a daily water volume of over 2000m3/day and a geothermal water temperature of 51°C at the well head.It is found that predictions using the above integrated geophysical exploration technology are in good agreement with the well geological formation data.This integrated geophysical technology can be effectively applied for geothermal exploration with high precision and reliability.

Periodic response analysis of a misaligned rotor system by harmonic balance method with alternating frequency/time domain technique

A dynamic model is established for an offset-disc rotor system with a mechanical gear coupling, which takes into consideration the nonlinear restoring force of rotor support and the effect of coupling misalignment. Periodic solutions are obtained through harmonic balance method with alternating frequency/time domain(HB-AFT) technique, and then compared with the results of numerical simulation. Good agreement confirms the feasibility of HB-AFT scheme. Moreover, the Floquet theory is adopted to analyze motion stability of the system when rotor runs at different speed intervals. A simple strategy to determine the monodromy matrix is introduced and two ways towards unstability are found for periodic solutions: the period doubling bifurcation and the secondary Hopf bifurcation. The results obtained will contribute to the global response analysis and dynamic optimal design of rotor systems.

A flextensional transducer and its algorithmic method of resonant frequency

A flextensional transducer with an Omega shape and its algorithmic method of the resonant frequency and the shape functions are suggested. The Omega transducer is separated into four parts treated respectively as a thin shell of revolution and the theories of thin shells of revolution and piezoelectricity are used to obtain the energy functional of each part so that the sum of the energy functionals of the four parts is the energy functional of the whole Omega transducer. By substituting the shape functions with undetermined coefi3cients and the geo- metrical boundary conditions into the energy functional of the Omega transducer, the resonant frequency of the Omega transducer is firstly determined with the Rayleigh-Ritz method. With the gotten resonant frequency, the constant coefficients of the shape functions are following solved through the Rayleigh-Ritz partial differential equations and the geometrical boundary condition equations. The solving method of the resonant frequency and the shape functions is also extended to the cymbal transducer. Such an analytical method is verified to be feasible by the results of the finite element analysis and experiments. The research indicates that （1） The radial vibration of the piezoelectric ceramic is in phase with the longitudinal vibration of the top of metal cap, and it cut down the reversed phase component in the sound field. The Omega transducer can be a low frequency transducer. （2） The determination method of the resonant frequency and the shape functions give a solution to the optimum designs of the Omega transducer and the cymbal transducer. （3） The determination method of the resonant fi＇equency and the shape functions can also be used in other flextensional transducers or other structures which are composed of thin shells of revolution, so it is universal.

Low frequency ultrasonic multi-mode Lamb wave method for characterizing the ultra-thin transversely isotropic laminate composite: Theory and experiment

A low-frequency multi-mode ultrasonic Lamb wave method suitable for character- izing the thickness, the density and the elastic constants of the ultra-thin transversely isotropic laminate composite is presented. The 'ultra-thin' here means that the thickness of the plate is much less than the wavelength of the ultrasonic wave so that the echoes from the front and back faces of the plate can't be separated in the time domain. The dispersion equations for the low frequency ultrasonic Lamb waves with the propagation directions parallel and vertical to the fiber direction are derived. In conjunction with the least square algorithm method, the secant algorithm is used to estimate the parameters of the ultra-thin fiber-reinforced composite layer. The evaluation errors and the sensitivity of the method to different paramters of the thin composite are analyzed. The technique has been used to characterize the ultra-thin grass fiber reinforced PES composite with thickness down to ten percents of the ultrasonic wavelength. It is observed that the agreement between the nominal and the estimation values is reasonably good.

GLOBAL EXISTENCE AND L^p ESTIMATES FOR SOLUTIONS OF DAMPED WAVE EQUATION WITH NONLINEAR CONVECTION IN MULTI-DIMENSIONAL SPACE

In this article, the author studies the Cauchy problem of the damped wave equation with a nonlinear convection term in multi-dimensions. The author shows that a classical solution to the Cauchy problem exists globally in time under smallness condition on the initial perturbation. Furthermore, the author obtains the L^p （2 ≤ p ≤ ∞） decay estimates of the solution.

Stability analysis of the simplest Takagi-Sugeno fuzzy control system using circle criterion

A frequency-domain-based sufficient condition is derived to guarantee the globally asymptotic stability of the simplest Takagi-Sugeno （T-S） fuzzy control system by using the circle criterion. The analysis is performed in the frequency domain, and hence the condition is of great significance when the frequency-response method, which is widely used in the linear control theory and practice, is employed to synthesize the simplest T-S fuzzy controller. Besides, this sufficient condition is featured by a graphical interpretation, which makes the condition straightforward to be used. Comparisons are drawn between the performance of the simplest T-S fuzzy controller and that of the linear compensator. Two numerical examples are presented to demonstrate how this sufficient condition can be applied to both stable and unstable plants.

Ultra low frequeney electromagnetic wave anomaly and its spectrum characteristics before earthquakes

Many observations and researches show that abundant and intense ultra low frequency (ULF) electromagneticanomalies appears before local earthquakes. In order to understand this phenomenon systematically, the trans-mission property and the formation of the seismic-electric dipole are discussed in this paper. The results showthat the vertical component Of the ULF electric anomaly before earthquake has the properties of better penetration, less disturbance and high signal-to-noise ratio. The signal can be easily extracted and received. The anomaly should be an important way to seek for reliable short-term and imminent earthquake precursors. After thespectrum analysis of the (ULF) electric field anomalies, we found that the periods of the anomaly related to localearthquakes are from a few minutes to a dozens minutes. There is a relation between the spectrum of the anomaly and the epicentral distance. The ULF electric field anomalies strongly rely on the orientation of the seismo-genie zone. The percolation electric field anomaly and its spectrum amplitude do not have obvious relation withthe size of local earthquakes.