The multi-tone frequency modulation （FM） signal transferred through track circuit in automatic train control （ATC） system is analyzed. A digital filter with ideal sloping shape in frequency domain is designed for ...The multi-tone frequency modulation （FM） signal transferred through track circuit in automatic train control （ATC） system is analyzed. A digital filter with ideal sloping shape in frequency domain is designed for frequency discrimination. With this filter, the FM signal is converted into AM-FM signal by frequency-to-amplitude conversion. The modulating signal is finally extracted from the envelope of the AM-FM signal. Simulations show that the digital demodulation method could accurately recover the modulating signal in low signal noise ratio （SNR） circumstance, and has good performance in suppressing interference of harmonies of traction current frequency. The feasibility of the proposed method is proved in a hardware system based on SHARC DSP.展开更多
Evaluation of the health state and prediction of the remaining life of the track circuit are important for the safe operation of the equipment of railway signal system.Based on support vector data description(SVDD)and...Evaluation of the health state and prediction of the remaining life of the track circuit are important for the safe operation of the equipment of railway signal system.Based on support vector data description(SVDD)and gray prediction,this paper illustrates a method of life prediction for ZPW-2000A track circuit,which combines entropy weight method,SVDD,Mahalanobis distance and negative conversion function to set up a health state assessment model.The model transforms multiple factors affecting the health state into a health index named H to reflect the health state of the equipment.According to H,the life prediction model of ZPW-2000A track circuit equipment is established by means of gray prediction so as to predict the trend of health state of the equipment.The certification of the example shows that the method can visually reflect the health state and effectively predict the remaining life of the equipment.It also provides a theoretical basis to further improve the maintenance and management for ZPW-2000A track circuit.展开更多
At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to an...At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to analyze the data.Therefore,we introduce kernel principal component analysis and stacked auto-encoder network(KPCA-SAD)into the fault diagnosis of ZPW-2000 track circuit.According to the working principle and fault characteristics of track circuit,a fault diagnosis model of KPCA-SAE network is established.The relevant parameters of key components recorded in the data collected by field staff are used as the fault feature parameters.The KPCA method is used to reduce the dimension and noise of fault document matrix to avoid information redundancy.The SAE network is trained by the processed fault data.The model parameters are optimized overall by using back propagation(BP)algorithm.The KPCA-SAE model is simulated in Matlab platform and is finally proved to be effective and feasible.Compared with the traditional method of artificially analyzing fault data and other intelligent algorithms,the KPCA-SAE based classifier has higher fault identification accuracy.展开更多
对于环境中存在的各种类型能量源,其往往具有不同的阻抗特性以及输出功率范围。为了提高能量收集系统的能量萃取能力,合理的接口电路设计是关键。基于此,通过对环境中光伏(Photovoltaic,PV)能量源微弱直流特性以及高效率收集和转化的研...对于环境中存在的各种类型能量源,其往往具有不同的阻抗特性以及输出功率范围。为了提高能量收集系统的能量萃取能力,合理的接口电路设计是关键。基于此,通过对环境中光伏(Photovoltaic,PV)能量源微弱直流特性以及高效率收集和转化的研究,在传统开路电压法(Open-Circuit Voltage,OCV)的基础上,结合输入电压纹波控制,提出了一种可实时最大功率点追踪(Maximum Power Point Tracking,MPPT)的预估算法。该预估算法根据能量源的输出特性,采用了分数开路电压法(Fractional Open-Circuit Voltage,FOCV),并根据纹波大小动态调节变换器的工作模式,实现阻抗匹配。为了尽可能减小因采样带来的能量损失,采用可片上全集成的较小的采样电容,并逐周期的进行开路电压采样和计算,实现了对源功率变化的高精度追踪。仿真结果表明,所提出的追踪算法能够实时监测能量源的状态,具有高的追踪速度和追踪精度,且采样时间仅需100 ns。能量源功率在1μW~10 mW范围内变化时,最短的追踪时间仅需4.37μs,追踪精度可达99.7%。展开更多
在激光无线能量传输中,由于瞄准系统误差和物体遮挡的影响,光电池阵列接收到的激光辐照分布不均匀,导致光电池阵列组串内的电池间出现电流失配,输出功率下降。针对该问题,采用分布式最大功率点追踪(Distributed Maximum Power Point Tra...在激光无线能量传输中,由于瞄准系统误差和物体遮挡的影响,光电池阵列接收到的激光辐照分布不均匀,导致光电池阵列组串内的电池间出现电流失配,输出功率下降。针对该问题,采用分布式最大功率点追踪(Distributed Maximum Power Point Tracking,DMPPT)技术,减少光电池阵列组串内的电池间电流失配,并用并联型Boost(PT-Boost)电路替代传统Boost电路,降低DC/DC转换器的输入电流纹波,使DMPPT系统获得高追踪效率。实验结果表明,相较于传统Boost电路,PT-Boost电路的追踪效率提高3.6%,达到93.5%。在上述研究的基础上,设置了遮光率分别为0%、25%和50%的激光无线能量传输场景,DMPPT系统整体效率分别达到了93%、92.6%和90.3%。该研究结果对激光辐照不均匀场景下激光无线能量传输的最大功率点追踪指导意义。展开更多
文摘The multi-tone frequency modulation （FM） signal transferred through track circuit in automatic train control （ATC） system is analyzed. A digital filter with ideal sloping shape in frequency domain is designed for frequency discrimination. With this filter, the FM signal is converted into AM-FM signal by frequency-to-amplitude conversion. The modulating signal is finally extracted from the envelope of the AM-FM signal. Simulations show that the digital demodulation method could accurately recover the modulating signal in low signal noise ratio （SNR） circumstance, and has good performance in suppressing interference of harmonies of traction current frequency. The feasibility of the proposed method is proved in a hardware system based on SHARC DSP.
基金Natural Science Fund of Gansu Province(No.1310RJZA046)
文摘Evaluation of the health state and prediction of the remaining life of the track circuit are important for the safe operation of the equipment of railway signal system.Based on support vector data description(SVDD)and gray prediction,this paper illustrates a method of life prediction for ZPW-2000A track circuit,which combines entropy weight method,SVDD,Mahalanobis distance and negative conversion function to set up a health state assessment model.The model transforms multiple factors affecting the health state into a health index named H to reflect the health state of the equipment.According to H,the life prediction model of ZPW-2000A track circuit equipment is established by means of gray prediction so as to predict the trend of health state of the equipment.The certification of the example shows that the method can visually reflect the health state and effectively predict the remaining life of the equipment.It also provides a theoretical basis to further improve the maintenance and management for ZPW-2000A track circuit.
基金National Natural Science Foundation of China(No.61763023)。
文摘At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to analyze the data.Therefore,we introduce kernel principal component analysis and stacked auto-encoder network(KPCA-SAD)into the fault diagnosis of ZPW-2000 track circuit.According to the working principle and fault characteristics of track circuit,a fault diagnosis model of KPCA-SAE network is established.The relevant parameters of key components recorded in the data collected by field staff are used as the fault feature parameters.The KPCA method is used to reduce the dimension and noise of fault document matrix to avoid information redundancy.The SAE network is trained by the processed fault data.The model parameters are optimized overall by using back propagation(BP)algorithm.The KPCA-SAE model is simulated in Matlab platform and is finally proved to be effective and feasible.Compared with the traditional method of artificially analyzing fault data and other intelligent algorithms,the KPCA-SAE based classifier has higher fault identification accuracy.
文摘对于环境中存在的各种类型能量源,其往往具有不同的阻抗特性以及输出功率范围。为了提高能量收集系统的能量萃取能力,合理的接口电路设计是关键。基于此,通过对环境中光伏(Photovoltaic,PV)能量源微弱直流特性以及高效率收集和转化的研究,在传统开路电压法(Open-Circuit Voltage,OCV)的基础上,结合输入电压纹波控制,提出了一种可实时最大功率点追踪(Maximum Power Point Tracking,MPPT)的预估算法。该预估算法根据能量源的输出特性,采用了分数开路电压法(Fractional Open-Circuit Voltage,FOCV),并根据纹波大小动态调节变换器的工作模式,实现阻抗匹配。为了尽可能减小因采样带来的能量损失,采用可片上全集成的较小的采样电容,并逐周期的进行开路电压采样和计算,实现了对源功率变化的高精度追踪。仿真结果表明,所提出的追踪算法能够实时监测能量源的状态,具有高的追踪速度和追踪精度,且采样时间仅需100 ns。能量源功率在1μW~10 mW范围内变化时,最短的追踪时间仅需4.37μs,追踪精度可达99.7%。
文摘在激光无线能量传输中,由于瞄准系统误差和物体遮挡的影响,光电池阵列接收到的激光辐照分布不均匀,导致光电池阵列组串内的电池间出现电流失配,输出功率下降。针对该问题,采用分布式最大功率点追踪(Distributed Maximum Power Point Tracking,DMPPT)技术,减少光电池阵列组串内的电池间电流失配,并用并联型Boost(PT-Boost)电路替代传统Boost电路,降低DC/DC转换器的输入电流纹波,使DMPPT系统获得高追踪效率。实验结果表明,相较于传统Boost电路,PT-Boost电路的追踪效率提高3.6%,达到93.5%。在上述研究的基础上,设置了遮光率分别为0%、25%和50%的激光无线能量传输场景,DMPPT系统整体效率分别达到了93%、92.6%和90.3%。该研究结果对激光辐照不均匀场景下激光无线能量传输的最大功率点追踪指导意义。
