Dynamics Modeling and Numerical Analysis of Rotor with Elastic Support/Dry Friction Dampers

The elastic support/dry friction damper is a type of damper which is used for active vibration control in a rotor system.To establish the analytical model of this type of damper,a two-dimensional friction model-ball/plate model was proposed.By using this ball/plate model,a dynamics model of rotor with elastic support/dry friction dampers was established and experimentally verified.Moreover,the damping performance of the elastic support/dry friction damper was studied numerically with respect to some variable parameters.The numerical study shows that the damping performance of the elastic support/dry friction damper is closely related to the stiffness distribution of the rotor-support system,the damper location,the pressing force between the moving and stationary disk,the friction coefficient,the tangential contact stiffness of the contact interface,and the stiffness of the stationary disk.In general,the damper should be located on an elastic support which has a large vibration amplitude in order to achieve a better damping performance,and the more vibration energy in this elastic support concentrates,the better performance of the damper will be.The larger the tangential contact stiffness of the contact interface,and the stiffness of the stationary disk are,the better performance of the damper will be.There will be an optimal value of the friction force at which the damper performs best.

Visual study on the characteristics of liquid and droplet in a novel rotor-stator reactor

Rotor–stator reactor(RSR), an efficient mass transfer enhancer, has been applied in many fields. However,the hydrodynamic characteristics of liquid flow in RSR are still a mystery despite they are fundamental for the mass transfer performance and processing capacity. In view of the above, this paper studies the liquid–liquid flow and liquid holdup in RSR under various conditions with a high-speed camera. The paper firstly demonstrates two flow patterns and liquid holdup patterns that we obtained from our experiment and then presents in succession a flow pattern and a liquid holdup criterion for the transition of film flow to filament flow and complete filling to incomplete filling. It is found that experimental parameters, including rotor–stator distance, rotational speed and volume flow rate exert great influence on the average droplet diameter and size distribution. Besides, by comparison and contrast, we also find that the experimental values match well with our previous predicted calculations of the average diameter, and the relation between the average diameter and the mean energy dissipation rate.

Parameter Modeling and Kinematical Simulation for Rotor and Stator of Screw Pump

The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stator. With the purpose of finding optimal parameters to improve the efficiency of screw pump design, the key technologies involved in the parametric modeling of rotor and stator were analyzed. The three-dimensional (3D) design software SolidWorks was used for the secondary development and parametric modeling of rotor and stator. After that the simulation models of different kinds of screw pumps were established based on the cycloid type, variation coefficient, and screw head number. Finally the COSMOSMotion was used to analyze the motion characteristics on the equidistant line of rotor, including velocity and acceleration. This design and modeling method has been used in screw pump enterprises for design and development, laying the foundation for finite element analysis and further optimization of screw pump.

For Propulsion Applications It Is Possible to Utilize Both the Torque Output of the Rotor and the Reactional Torque Acting on the Stator of the Driving Electric Motor by Linearizing the Stator

This paper presents a novel idea of utilizing the reactional torque of the conventional electric motor as a linear output for propulsion in addition to the conventional torque output of the rotor. The idea is demonstrated by a theoretical proposal of linearizing the stator of one of the most used motors in Electrical Vehicles and Hybrid Vehicles. The proposed Linear Stator Motor is a simple modification without involving any functional change of the conventional motor. Though theoretical, the indicated possible input energy saving of more than 75% as compared to the conventional motor is no surprise, as by linearizing the stator, an almost equal linear propulsion output is added to the conventional rotor output. In addition to this remarkable saving in input energy, the proposed Linear Stator Motor that suits all types of vehicles, can maintain propulsion without the need for a mechanical transmission system. Also, in the case of watercraft and aircraft vehicles, no external mechanical propulsion drive system is required. It is just an internal force that can push the vehicle forward, backward, or laterally, while the conventional rotor output can be utilized for energy recovery by driving a DC generator.

INFLUENCES ON COUPLED LATERAL AND TORSION VIBRATION BEHAVIOR OF RUB-IMPACT ROTOR BY ROTOR-TO-STATOR CLEARANCE

With the establishment of the nonlinear coupled lateral and torsion vibrationequations of rub-impact Jeffcott rotor and through numerical simulations, the influences on lateraland torsion vibration behavior by rotor-to-stator clearance are analyzed, which prove that there isstrong impact on coupled lateral and torsion vibration behavior. Smaller the clearance is, morecomplex the motion of rotor is. When the clearance is larger, the frequency spectrum of rub-impactrotor is mainly composed of 1/2X, 1/3X and 1/4X components. With the decrease of clearance,quasi-periodic and chaotic motions will be present. Under different clearances, the bifurcationdiagrams of lateral and torsion vibrations can be divided into rub-free zone, rub-light zone andthree complex motion zones in which the motion trend of lateral vibration is similar to that of thetorsion vibration. Compared with the lateral vibration, the torsion vibration is of more motionforms and more abundant frequency components in amplitude spectrum.

Creation and Development of Turbo-generators with Water-Cooled Stator and Rotor Windings in Shanghai Electrical Machinery Mfg Works

1. An Overview of Manufacture and Operation A turbine generator utilizing a new technology of electrical machinery industry, i.e. the windings of its stator and rotor all being inner water-cooled, was first successfully created in China and was known afterwards as a turbine generator with watercooled stator and rotor windings (Abbrev, TGWSR). The teachers from Zhejiang University came to Shanghai between

MATCH-MODE METHOD AND ITS NUMERICAL SIMULATION FOR ROTOR-STATOR INTERACTION SOURCE MODES AND PROPAGATION MODES IN AN ANNULAR DUCT WITH MULTI-TREATMENTS

The suppressing design of the engine nacelle in an aircraft can benefit from the development of the prediction system for the sound fields in engine ducts which includes the prediction of the source generation and that of sound propagation in ducts. First, the acoustic match mode principle between the source modes of rotor stator interaction noise and the propagation modes is presented in this paper. Second, by utilizing this principle, the theoretical prediction method for rotor stator interaction noise generation and its propagation and attenuation in an annular duct with multi treatments is developed. That means that the prediction of sound propagation and attenuation in the segmented ducts might no longer completely depend on the in duct mode measurements, and the investigation on the sound propagation and attenuation in ducts can be accomplished not only by acoustic mode measurement, but also by making use of the source prediction to determine the source modes excited by rotor stator interaction. The effects of fan speed, blade/vane numbers, axial spacing between rotor and stator on the in duct sound attenuation and generated sound power level before and after ducts (also including the sound power level of blade passing frequency and its harmonics at the inlet of ducts) have been numerically calculated by using this prediction method. The reliability of this prediction method is verified by reasonable agreement between the predicted results with measured results in references. By analyzing the results of calculating cases, some reference criteria are provided for the engineering design of the suppressing engine nacelle.

GENERATOR VIBRATION FAULT DIAGNOSIS METHOD BASED ON ROTOR VIBRATION AND STATOR WINDING PARALLEL BRANCHES CIRCULATING CURRENT CHARACTERISTICS

Rotor vibration characteristics are first analyzed, which are that the rotor vibration of fundamental frequency will increase due to rotor winding inter-turn short circuit fault, air-gap dynamic eccentricity fault, or imbalance fault, and the vibration of the second frequency will increase when the air-gap static eccentricity fault occurs. Next, the characteristics of the stator winding parallel branches circulating current are analyzed, which are that the second harmonics circulating current will increase when the rotor winding inter-turn short circuit fault occurs, and the fundamental circulating current will increase when the air-gap eccentricity fault occurs, neither being strongly affected by the imbalance fault. Considering the differences of the rotor vibration and circulating current characteristics caused by different rotor faults, a method of generator vibration fault diagnosis, based on rotor vibration and circulating current characteristics, is developed. Finally, the rotor vibration and circulating current of a type SDF-9 generator is measured in the laboratory to verify the theoretical analysis presented above.

Fabricated and friction test anisotropy material of ultrasonic motor

The twisters for composed of anisotropic material were designed and manufactured.And two kinds of directional-composites were made:one was fiber direction vertical with frictional interface and another was parallel with frictional interface and moving direction.By varying the proportions of epoxy resin and fiber and arranging the orientations of fiber,the composites anisotropy along longitudinal and circumferential were got.Using density measurement,the mass fraction of resin and fiber were calculated.According to composite meso-scopic mechanics,the elasticity constants of composite were analyzed and calculated.The composite different thicknesses were sliced,and attach to the rotor,then the load characteristics,no-load speed,stop load of ultrasonic motor(USM)were test.The output properties of USM with 0.6 mm thickness composite were superior.The effect of friction material on ultrasonic motor was analyzed.Elastic modulus,thickness and micro-morphology of material are main factors which affect characteristics of ultrasonic motor.

Rotor Design and Finite Element Analysis of Traveling Wave Rotaty Ultrasonic Motor

The dynamic transfer mechanism of the traveling wave rotary ultrasonic motor rotor-stator’ s contact surface is studied in the paper and the key parts stator and cone flexible rotor of ultrasonic motor are designed.The three-dimensional contact model and finite element model considering the radial sliding between the rotor and the stator are established. The relation between the stator surface particle that amplitude frequency characteristics,resonance speed,radial displacement of ultrasonic motor and the tooth height are analyzed. Mass point radial relative displacement of contact surface between the cone flexible rotor,flexible rotor and the stator are contrasted. The cone flexible rotor is better placed on the surface of the stator tooth through its elastic deformation is interpreted. The cone flexible rotor reduces the radial slip between the stator and the output efficiency of ultrasonic motor is improved. The displacement trajectory of the stator surface is synthesized in a row wave cycle. The method of the stator mass point elliptical motion drives the rotor rotation is verified.

Stator-Flux Oriented Continuous Control of Torque in Induction Motors

This paper analyzes dynamic equivalent circuit of induction motor and the relationship among inner fluxes, then presents a direct stator flux oriented continuous torque control (DSFOCTC) scheme of induction motor , which uses stator current vector control instead of voltage vector control. As a combination of direct torque control (DTC) and flux oriented vector control, it achieves round stator flux and continuous dynamic torque control resulting in less torque ripple than that in DTC. It reduces the dependence on rotor parameters, and is especially insensitive to rotor resistance. Finally, an induction motor speed control system incorporating this novel scheme is given and checked by simulation.

A novel two-degree-of-freedom spherical ultrasonic motor using three travelling-wave type annular stators

In order to promote the tolerance and controllability of the multi-degree-of-freedom(M-DOF) ultrasonic motor, a novel two-degree-of-freedom(2-DOF) spherical ultrasonic motor using three traveling-wave type annular stators was put forward. Firstly,the structure and working principle of this motor were introduced, especially a spiral spring as the preload applied component was designed for adaptive adjustment. Then, the friction drive model of 2-DOF spherical motor was built up from spatial geometric relation between three annular stators and the spherical rotor which was used to analyze the mechanical characteristics of the motor.The optimal control strategy for minimum norm solution of three stators' angular velocity was proposed, using Moore-Penrose generalized inverse matrix. Finally, a 2-DOF prototype was fabricated and tested, which ran stably and controllably. The maximum no-load velocity and stall torque are 92 r/min and 90 m N·m, respectively. The 2-DOF spherical ultrasonic motor has compact structure, easy assembly, good performance and stable operation.

Study of steady and unsteady wet steam condensing flows in a turbine stage

Objective To develop the numerical method for the steady and unsteady wet steam condensing flow in turbine stage. Methods An Eulerian/Eulerian numerical model is used to describe the spontaneous condensation flow in the steam turbine. For the steady condensing flow computations, the mixing plane model was used. For the unsteady condensing flow computations, the sliding mesh method was used to simulate the rotor-stator interactions. Results The numerical results showed the obvious differences between non-condensing and condensing flows. The results also showed the unsteadiness effect due to rotor-stator interactions had a deep influence on the formation and growth process of water droplets. Conclusion The numerical methods presented in this paper are valid for the condensing flow in the turbine stage.

Theoretical and Numerical Analysis of the Mechanical Erosion in Steam Turbine Blades. Part I

The methodology of calculation of the velocity distribution for the stream frictionless and the drops in the flow line, on the basis of the frictionless, two-dimensional, stationary, transonic and homogenous flow is established. The knowledge of conditions that govern the low pressure section of steam turbines in the last stage to have an approximate movement of the droplets in the blade cascades and the accumulation of droplets on the stator blades, flowing through the steam, is presented. This study is used for developing a code in Fortran about the velocity distribution in the output of stator blades that have flow conditions of wet steam, in order to understand the causes that originate the erosion on the blades of the last stages in the low pressure section of steam turbines.

Analysis of electromagnetic characteristics of typical faults in permanent magnet wind generators

Due to the harsh actual operating environment of the permanent magnet wind turbine,it is easy to break down and difficult to monitor.Therefore,the electromagnetic characteristics identification of major fault types of large-scale permanent magnet wind turbines is studied in this paper.The typical faults of rotor eccentricity,stator winding short circuit and permanent magnet demagnetization of permanent magnet wind turbines are analyzed theoretically.The wavelet analysis algorithm is used to decompose and reconstruct the abnormal electromagnetic signal waveform band,and the characteristic frequency of the electromagnetic signal is obtained when the fault occurs.In order to verify the effectiveness of the proposed method,a 3.680MW permanent magnet wind turbine was taken as the research object.Its physical simulation model was established,and an external circuit was built to carry out field co-simulation.The results show that the motor fault type can be determined by detecting the change rule of fault characteristic frequency in the spectrum diagram,and the electromagnetic characteristic analysis can be applied to the early monitoring of the permanent magnet wind turbine fault.

Analysis of Temperature Rise in High-Speed Permanent Magnet Synchronous Traction Motors by Coupling the Equivalent Thermal Circuit Method and Computational Fluid Dynamics

To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.

First 50 MVA turbo-type synchronous condenser with evaporative cooling of stator commissioned

Based on the successful operation of 1200 kW turbo-typemodel generator with separated evaporative cooling ofboth stator and rotor,a 50 MVA turbo-type synchronous condenserwith evaporative cooling stator was constructed and put into opera-tion on March 8,1991 at Xijiao Substation of Shanghai Power Bu-reau.This is the first one in the world that applied the evaporativecooling technique on turbo-generator in industrial scale.

Dynamical Analysis of Rub-impact Rotor System with Asymmetric Oil Film Force

Considering the effect of non-symmetry film force, nonlinear stiffness and nonlinear friction force, a dynamical model of rub-impact rotor system is established, then the nonlinear dynamical behavior is studied by numerical analysis method. The effect of rotation speed, nonlinear stiffitess ratio and speed effect factor on brifurcation and chaotic behavior for rub-impact rotor system is comprehensively analyzed. The analysis results show that the effect of non-symmetry film force, nonlinear stiffness and nonlinear friction force on the dynamical behavior of the rotor system has close relation with rotation speed. The chaotic behavior exists in a wider parameter region, and the chaotic evolution rule is more complicated. The research provides a reliable theory basis and reference for diagnosing some faults of the rotor system.

无刷双馈电机研究综述与展望

无刷双馈电机具有结构可靠、变频器容量小等优势,非常适合灵活运行于防爆、易燃等特殊或极端工况,近年来受到广泛关注。该文根据无刷双馈电机的基本工作原理,明确了该类电机的命名原则与规范名称;总结了现有定转子方案的结构及性能特点,综合考虑性能指标与结构工艺,提出了转子双套绕组的发展方向;梳理了无刷双馈电机的稳态等效电路模型及基于各类数学模型的优化设计方法,针对现存难以完整考虑不同转速工况性能的不足,阐明了利用新型同步-异步相串联等效电路进行优化设计的思路;对比分析了经典及新近出现的无刷双馈电机控制系统拓扑和控制策略特点,面向典型电动、发电工况建立了完整的电机及控制系统。最后,对无刷双馈电机的上述理论研究问题及工业应用的发展方向进行了总结阐述,为该类电机的深入研究及加快推广应用提供参考和指导。

三代压水堆核主泵关键部件制造及工艺研究进展

核主泵作为反应堆冷却剂系统中唯一高速旋转的设备,其正常运行对于整个核电站的安全至关重要.长期以来,核主泵制造的安全性与可靠性一直是中国核电技术发展的“卡脖子”难题.近年来,得益于国家对核电技术基础研究的大力投入,以及依托重大课题项目的推进,中国三代压水堆核主泵国产化进程在各个方面都取得了重大成果.文中从核主泵制造及工艺的角度,深入剖析叶轮、泵壳、定子、转子、屏蔽套、密封、轴承等关键部件的发展历程,并针对各部件的材料选择、加工、装配工艺、检测方法及技术体系等进行详细分析,总结了中国核主泵的制造进度及难点.最后,结合当前核主泵制造的现状,提出中国核主泵制造发展的相关建议,这对中国核电事业的国产化进程具有重要意义.