Vertical bearing capacity of pile based on load transfer model

The load transfer analytical method is applied to study the bearing mechanism of piles with vertical load in this paper. According to the different hardening rules of soil or rock around the pile shaft, such as work-softening, ideal elasto-plastic and work-hardening, a universal tri-linear load transfer model is suggested for the development of side and tip resistance by various types of soil (rock) with the consideration of sediment at the bottom of the pile. Based on the model, a formula is derived for the relationship between the settlement and load on the pile top to determine the vertical bearing capacity, taking into account such factors as the characteristics of the stratum, the side resistance along the shaft, and tip resistance under the pile tip. A close agreement of the calculated results with the measured data from a field test pile lends confidence to the future application of the present approach in engineering practice.

Finite element analysis of effect of soil displacement on bearing capacity of single friction pile

Effect of soil displacement on friction single pile in the cases of tunneling,surcharge load and uniform soil movement was discussed in details with finite element method.Lateral displacement of the pile caused by soil displacement reached about 90% of the total displacement,which means that P-Δ effect of axial load can be neglected.The maximum moment of pile decreased from 159 kN·m to 133 kN·m in the case of surcharge load when the axial load increased from 0 to the ultimate load.When deformation of pile caused by soil displacement is large,axial load applied on pile-head plays the role of reducing the maximum bending moment in concrete pile to some extent.When pile is on one side of the tunnel,soil displacements around the pile are all alike,which means that the soil pressures around the pile do not decrease during tunneling.Therefore,Q-s curve of the pile affected by tunneling is very close to that of pile in static loading test.Bearing capacities of piles influenced by surcharge load and uniform soil movement are 2480 kN and 2630 kN,respectively,which are a little greater than that of the pile in static loading test(2400 kN).Soil pressures along pile increase due to surcharge load and uniform soil movement,and so do the shaft resistances along pile,as a result,when rebars in concrete piles are enough,bearing capacity of pile affected by soil displacement increases compared with that of pile in static loading test.

Evaluation of the Ultimate Capacity of Friction Piles

The precise prediction of maximum load carrying capacity of bored piles is a complex problem because the load is a function of a large number of factors. These factors include method of boring, method of concreting, quality of concrete, expertise of the construction staff, the ground conditions and the pile geometry. To ascertain the field performance and estimate load carrying capacities of piles, in-situ pile load tests are conducted. Due to practical and time constraints, it is not possible to load the pile up-to failure. In this study, field pile load test data is analyzed to estimate the ultimate load for friction piles. The analysis is based on three pile load test results. The tests are conducted at the site of The Cultural and Recreational Complex project in Port Said, Egypt. Three pile load tests are performed on bored piles of 900 mm diameter and 50 m length. Geotechnical investigations at the site are carried out to a maximum depth of 60 m. Ultimate capacities of piles are determined according to different methods including Egyptian Code of practice (2005), Tan-gent-tangent, Hansen (1963), Chin (1970), Ahmed and Pise (1997) and Decourt (1999). It was concluded that approxi- mately 8% of the ultimate load is resisted by bearing at the base of the pile, and that up to 92% of the load is resisted by friction along the shaft. Based on a comparison of pile capacity predictions using different method, recommendations are made. A new method is proposed to calculate the ultimate capacity of the pile from pile load test data. The ultimate capacity of the bored piles predicted using the proposed method appears to be reliable and compares well to different available methods.

Evaluation of ultimate bearing capacity of Y-shaped vibro-pile

Based on Mindlin stress solution, a numerical computational method was proposed to calculate the stresses in the ground induced by side friction and the resistance of Y-shaped vibro-pile. The improved Terzaghi's and ЪерезанцевВГ's methods for ultimate bearing capacity evaluation were proposed by considering the stress strength induced by friction resistance at pile head level of Y-pile. A new method to calculate the ultimate bearing capacity of Y-pile was also proposed based on the assumptions of soil failure mode at the tip of Y-pile and the use of Mohr-Coulomb soil yield criterion and Vesic compressive correction coefficient with the induced stresses in the ground. Based on the comparisons with the field static load test results, it is found that the improved Terzaghi's method gives higher ultimate capacity, while the other two methods shows good agreement with the field results.

Analysis of bearing capacity of pile foundation in discontinued permafrost regions

Piles are the main building foundation in permafrost regions. Thawing the permafrost foundation would have a negative effect on a pile, and may cause damage to the building. This paper focuses on the effects of negative friction force due to the melt of permafrost, and presents four calculated methods for bearing capacity of a pile. An engineering station was taken as an example, where the lengths of a pile were compared based on four methods. Finally, quick field load tests were carried out, and some meaningful conclusions are presented. Thus, these analytical results can be used to design a pile for permafrost regions.

Bearing capacity and mechanical behavior of CFG pile composite foundation

CFG pile (i.e., pile constructed by granular materials of cement, fly-ash and gravel) composite foundation is applied in subsoil treatment widely and successfully. In order to have a further study of this kind of subsoil treatment technology, the influencing factors and calculation methods of the vertical bearing capacity of single CFG pile and the CFG pile composite foundation were discussed respectively. And based on the obtained solutions, effects by the cushion and measurements to reduce negative friction area were analyzed. Moreover, the developing law of settlement and bearing capacity eigenvalue controlled by the material strength with the increase of load were given for the CFG composite foundation. The in-situ static load test was tested for CFG pile. The results of test show that the maximum test load or half of the ultimate load is used from all the points of test, the average bearing capacity eigenvalue of single pile is 390 kN, and slightly greater than the design value of bearing capacity. The bearing capacity eigenvalues of composite foundation for 3 piles are greater than 300 kPa, and the mechanical properties of CFG pile composite foundation are almost identical in the case of the same load and cushion thickness. The pile-soil stress ratio and the load-sharing ratio can be adjusted through setting up cushion thickness.

Robust Optimization Method of Cylindrical Roller Bearing by Maximizing Dynamic Capacity Using Evolutionary Algorithms

Optimization of cylindrical roller bearings(CRBs)has been performed using a robust design.It ensures that the changes in the objective function,even in the case of variations in design variables during manufacturing,have a minimum possible value and do not exceed the upper limit of a desired range of percentage variation.Also,it checks the feasibility of design outcome in presence of manufacturing tolerances in design variables.For any rolling element bearing,a long life indicates a satisfactory performance.In the present study,the dynamic load carrying capacity C,which relates to fatigue life,has been optimized using the robust design.In roller bearings,boundary dimensions(i.e.,bearing outer diameter,bore diameter and width)are standard.Hence,the performance is mainly affected by the internal dimensions and not the bearing boundary dimensions mentioned formerly.In spite of this,besides internal dimensions and their tolerances,the tolerances in boundary dimensions have also been taken into consideration for the robust optimization.The problem has been solved with the elitist non-dominating sorting genetic algorithm(NSGA-II).Finally,for the visualization and to ensure manufacturability of CRB using obtained values,radial dimensions drawing of one of the optimized CRB has been made.To check the robustness of obtained design after optimization,a sensitivity analysis has also been carried out to find out how much the variation in the objective function will be in case of variation in optimized value of design variables.Optimized bearings have been found to have improved life as compared with standard ones.

A Reliable Method of Pile Load Test on Cast-in-Situ Pile Group of Existing Building for Retrofitting

Following the foundation failure of a building, with an aim of economical solution to strengthen other existing buildings of the same project, a new arrangement was implemented experimentally to test the adequacy of load bearing capacity of a few selected cast-in-situ RCC （reinforced cement concrete） pile groups without demolishing the existing buildings. In this test, the column bottom of an existing building was removed by the help of scaffolding and after that a frame system consisting tension piles and hollow beam was constructed over the pile cap of the to be tested pile group. The load was tested by the help of hydraulic jack system and the constructed frame system. This paper contains the detailed plan, arrangement and method of the test with illustrations. The deflection and loading data analysis is also included which was performed to determine the outcome of the test. Through this test method the appropriate assessment of capacity of pile group of existing building could be done successfully and in result the structure could be saved by only super structure retrofitting.

Bearing Behaviors of Stiffened Deep Cement Mixed Pile

A series of investigations were conducted to study the bearing capacity and load transfer mechanism of stiffened deep cement mixed （SDCM） pile. Laboratory tests including six specimens were conducted to investigate the frictional resistance between the concrete core and the cementsoil. Two model piles and twenty-four full-scale piles were tested to examine the bearing behavior of single pile. Laboratory and model tests results indicate that the cohesive strength is large enough to ensure the interaction between core pile and the outer cement-soil. The full-scale test results show that the SDCM piles exhibit similar bearing behavior to bored and cast-in-place concrete piles. In general, with the rational composite structure the SDCM piles can transmit the applied load effectively, and due to the addition of the stiffer core, the SDCM piles possess high bearing capacity. Based on the findings of these experimental investigations and theoretical analysi , a practical design method is developed to predict the vertical bearing capacity of SDCM pile.

New Method for Prediction Pile Capacity Executed by Continuous Flight Auger (CFA)

A study of piles is quit complex and the estimation of carrying capacity is calculated from theoretical formula and load test results. The design resistance may be calculated using conventional static pile design theory. The pile founding depths should be predetermined before installation from a site geotechnical investigation. To ascertain the field performance and estimate load carrying capacities of piles, in-situ pile load tests should be conducted. In this study, field pile load test data is analyzed to estimate the ultimate load for end bearing piles. The investigated site is about 100 × 110 m located in Alexandria, Egypt. Geotechnical investigations at the site are carried out to a maximum depth of 45 m. Four borings have been done in field. The tests are conducted at the site for two skelton structure buildings to be constructed on raft foundation rested on piles executed by continuous flight auger. Four pile load tests are performed on 600 mmdiameters and 27 mlengths. Ultimate capacities of piles are determined according to different methods. It is concluded that the percentage of friction load carried by the shaft along the pile length is about 46% of total load while the percentage of load carried by the end bearing is 54% of total load. A new proposed method by the author is presented to calculate the ultimate capacity of pile from pile load test. The proposed method depends on the settlement of pile without taken into consideration the elastic deformation. An empirical formula is presented from the relationship between stress and settlement of pile due to friction and end bearing only after deducting the elastic deformation. However, the obtained results for the ultimate capacity of end bearing piles are considered to be more accurate than other methods. The proposed method appears to give bitter results that agrees well with the theoretical predictions. The proposed method is easier, quicker and more reliable.

Steady Characteristics of the Water-Lubricated Conical Bearings

The water-lubricated conical bearing has attracted attentions of researchers for its simple structure, easily adjusted gap （fdm thickness ）, lower friction loss, and less pollution in application. A mathematic model with consideration of the effects of turbulence, two-phase flow, and temperature on the pressure field at bearing surface is proposed here. Using this model, the Reynolds＇ equation and energy equation are solved in which the thermo- physical properties of the water as lubricant are taken into account. The dependency of characteristics of bearing, such as load-earrying capacity, flow rate （pumping losses ）, and frictional losses, on angular velocity, conical angle, and radial eccentricities, is presented. The research results are beneficial to the improvement of the efficiency of conical bearing and the environmental protection.

上砂下黏地层中桩-筒复合基础V-H承载特性

海上风机基础不仅受自重等竖向力V作用,也因水流、波浪和风等影响而承受水平荷载H。为探讨上砂下黏地层中一种由单桩和吸力筒组成的新型海上风机桩-筒复合基础受V-H组合作用时的承载特性,自主设计完成了一系列室内桩-筒复合基础V-H组合加载模型试验,获得不同组合参数下桩-筒复合基础的荷载-位移曲线和桩身弯矩分布曲线,并绘制出V-H承载力包络线。在此基础上,采用ABAQUS建立了上砂下黏地层中桩-筒复合基础三维数值分析模型,经模型验证与参数分析,进一步讨论了砂土厚度、筒径、筒高以及加载高度等参数对桩-筒复合基础承载特性的影响曲线,并拟合出桩-筒复合基础承载力简化计算公式,分析结果表明:桩-筒复合基础能显著提高桩身水平承载力,增幅达30%~90%,且增加筒径比增加筒高更有利于提高基础水平承载力;上部砂土层较厚时,桩-筒复合基础存在一个使复合基础水平承载力达到最大的预加竖向荷载最佳值,其值随不同载荷工况在(0.4~0.7)Vult范围内变化。

波浪荷载下海上风力机桩基础滞回效应及水平承载力变化特性研究

该研究以海上风电桩基础为研究对象,采用自主设计的水平加载装置模拟波浪荷载,结合粒子图像测速(PIV)技术开展缩尺模型试验。着重探究不同幅值的波浪荷载加载过程中,桩周土体的循环变形特征及加载前后,海上风力机桩基础水平承载能力变化。试验结果表明:桩顶累积转角随加载次数呈线性增长、缓慢增长和稳定发展的三阶段变化特性;桩周土体呈现典型的刚性桩两区域破坏形式,桩右被动区土体位移矢量场和位移云图影响范围受加载幅值变化影响显著;桩顶循环加载荷载位移曲线表现出明显的滞回性,滞回圈随加载次数右移并产生累积位移。伴随着滞回圈面积减小和割线刚度增大,桩周土体由以塑性变形向弹性变形为主导变化;循环加载后的滞回圈有明显捏缩,耗能能力减弱。桩基础水平承载能力及弹性变形能力较加载前均明显提高。

卷积神经网络与随机场分析桩梁基础承载力

岩土体的参数在空间上随机分布,为能更好地反应实际工程地质条件,在桩基础承载力研究中考虑土体的不确定性,并建立具有重要工程价值的承载力预测模型,将基于随机场理论的岩土参数空间变异性引入桩梁基础的研究中,采用数值方法建立桩梁基础与群桩基础的二维随机有限元模型分析承载能力,并与模型试验结果验证。随后通过卷积神经网络建立土体参数随机场图像与基础极限承载力之间的模型进行承载力预测,并基于预测模型研究不同参数的影响。结果表明:考虑土体空间变异性的基础承载力与试验结果基本吻合,随机结果均高于确定性分析;随机场下桩梁基础与群桩基础的承载力均为正态分布;采用卷积神经网络建立的基础承载力预测模型精度较高,且可以用于参数分析,基础承载力随着土体参数的增加而增加,随变异系数的增加而下降。随机条件下,桩梁基础的承载力高于群桩基础,可以充分发挥土体强度并抵御参数不确定性带来的承载力损失。

超高层建筑复合桩基承载力可靠度仿真分析

为提高超高层建筑的安全性,提出一种超高层建筑复合桩基承载力可靠度仿真分析方法。建立函数关系式,分别计算柔性桩和刚性桩的极限承载力,分析桩侧摩擦力、桩端阻力以及桩长变化参数对承载力的影响;考虑超高层建筑安全系数和土层性质,利用恒载、活载指标评估复合桩基的荷载效应,建立随机变量计算模型获得不同可靠度指标的标准差,在融合各参数指标下完成对复合桩基承载力可靠度的最终计算。经仿真证明,所提计算方法得到的计算值与实际测量值非常接近,说明该方法的分析结果准确度较高,具有一定的应用价值。

OPTIMUM DESIGN OF HIGH-SPEED RAILWAY LOCOMOTIVE TRACTION GEAR

On the basis of deep investigation of locomotive traction gears manufactured at home and abroad , a variety of measures are putted forward to improve the driving load-bearing capacity and working life of our country's high-speed locomotive traction gears. The measures include the fol- lowing five aspects : optimally selecting the material and heat treatment process , optimally designing the tooth profile . reasonably choosing the manufacture accuracy and technique , optimally choosing the lubricant and the way of lubrication and seal , improving the dynamic feature of the gearing. In the respect of the tooth profile , a hob with optimal cutter angles is designed to make root thickness on the dangerous section as large as possible and the stress concentration as small as possible. Ad- dendum modification coefficient is optimized to minimize the maximum flash temperature in the course of meshing. Finally . finite element analysis method is used to calculate the deformation and the stress of teeth accurately. And on this basis , optimal profile correction and axial modification have been designed with regard to the start , continuious running and high speed travel of the loco- motive .

局部冲刷下砂土中桩-盘复合基础H-T联合承载特性

海上风机基础工作时既承受复杂组合荷载作用,也受波流冲刷影响。单桩-摩擦盘复合基础同时结合了单桩与重力式基础的特点,摩擦盘还可起防冲板作用。为探讨砂土地基中H-T联合作用时局部冲刷对这种复合基础承载特性的影响,首先基于室内水槽试验装置,完成了一系列模型载荷试验;获得了冲刷前后桩-盘复合基础的荷载-位移曲线,经无量纲化处理与曲线拟合,获得H-T联合受荷桩-盘复合基础的承载包络线及其简化计算公式。然后,采用有限元细化分析了主要冲刷参数(冲刷深度、冲刷宽度、冲刷角度)及加载点高度对复合基础承载特性的影响,结果表明:冲刷坑的存在使复合基础的横向及扭转抗力明显降低,削弱程度分别可达25%及45%;进一步分析表明,桩身弯矩值随加载点高度的增加而显著增大,随预加扭矩的增加呈下降趋势;局部冲刷会明显削弱复合基础的承载力,同时H-T联合作用时相应的承载力包络线向内发生不同程度的收缩;其中,冲刷深度的影响最大,对横向抗力与扭转抗力的削弱程度分别可达约35%及60%,冲刷角度次之,冲刷宽度的影响最小;此外,不同加载路径下桩-盘复合基础承载力包络线呈现一定程度的差异。

全模块化铝制天桥下部结构设计与力学分析

为了解决目前现存人行天桥桥墩设计过于保守,未能充分利用铝合金材料自重轻的优点,以及城市管网密集布设导致的城市地下结构施工困难等问题,结合钢材和混凝土2种材料的特性,采用钢材降低桥墩材料用量,并采用灌浆套筒、预埋件和螺栓锚固的连接方式,提出一种具有轻量化、模块化、拼装简单的新型全模块化铝制天桥桥墩;通过与传统独柱式桥墩对比,分析结构的力学性能,对桥墩的承载力水平、基础对土体的影响范围等方面进行研究。有限元数值分析结果表明,新型结构的承载能力高于传统结构,在减少材料消耗的基础上保证了结构的可靠性;基础的数值模拟结果表明,微型群桩承台基础对土层的影响范围小于桩柱式基础,有利于减小施工时城市管网造成的施工困难。

局部冲刷下砂土中桩-盘复合基础V-H组合承载特性

海上风电基础除承受复杂组合荷载作用外,也受波流冲刷作用.为探讨局部冲刷对砂土地基中V-H联合加载下单桩-摩擦盘复合基础承载特性的影响,基于自行设计的室内水槽试验装置,完成了一系列冲刷及模型载荷试验,获得了复合基础冲刷前后的荷载-位移曲线,经无量纲化处理与曲线拟合,得到复合基础承载包络线及其简化计算公式.计算结果表明:局部冲刷作用使复合基础的竖向及横向抗力明显降低,削弱程度分别约12.1%和26.9%.进一步分析表明:存在一个最优预加竖向荷载(V),其对复合基础的极限横向承载力起到最显著的增强效果;此外,局部冲刷作用导致V-H联合受荷单桩-摩擦盘复合基础的承载包络线明显向内收缩,所提出的简化计算公式可供工程应用参考.

海上试桩不同桩型承载力特性研究

天津南港某高桩码头拟建场地有深厚密实砂层,通过试桩测定设计桩型对砂层的穿透及贯入能力,研究不同基桩承载力特性。试验结果表明:混凝土预制桩及钢管桩均有较好的穿透及贯入能力;基桩轴向极限承载力高应变检测结果小于静载试验,误差均在5%以内;混凝土预制桩桩端承载力占总承载力不小于44.6%,钢管桩桩端承载力占总承载力不小于21.9%;相同荷载作用下,混凝土预制方桩静载与动载沉降量之比为1.40,钢管桩为0.90,两者差异明显;基桩承载力达到极值时桩侧摩阻力要明显大于规范极限侧摩阻力,规范取值偏保守。