Preparation of Phase Change Concrete Using Environmentally FriendlyMaterials and Its Performance Study

The control of carbon emissions and energy conservation,and environmental protection are hot spots of global concern.In this paper,phase change paraffin wax is applied to porous materials for adsorption and storage,and nature’s eco-friendly materials are selected as the porous matrix to propose an eco-friendly phase change concrete using eco-friendly materials as raw materials.It was obtained that the strength of the phase change concrete utilizing environmentally friendly materials was 25.4%to 36.8%lower than that of ordinary concrete,while some of the phase change light aggregates were found to produce slip damage with the cement paste in the damage study.By constructing a small-sized test room for thermal properties,we obtained a phase change concrete that utilizes environmentally friendly materials to control the temperature better than the commonly studied phase change concrete,with a peak temperature drop of up to 2.6℃ in the phase change test room compared to the normal test room and a delay in the peak temperature.

Synthesis and mechanism of environmentally friendly high temperature and high salt resistant lubricants

With the exploration and development of deep and ultra-deep oil and gas,high torque and high friction during the drilling of deep and ultra-deep wells become one of the key issues affecting drilling safety and drilling speed.Meanwhile,the high temperature and high salt problem in deep formations is prominent,which poses a major challenge to the lubricity of drilling fluids under high temperature and high salt.This paper reports an organic borate ester SOP as an environmentally friendly drilling fluid lubricant.The performance evaluation results show that when 1%lubricant SOP is added to the fresh water-based mud,the lubrication coefficient decreases from 0.631 to 0.046,and the reduction rate of lubrication coefficient is 92.7%.Under the conditions of 210℃ and 30%NaCl,the reduction rate of lubricating coefficient of the base slurry with 1%SOP was still remain 81.5%.After adding 1%SOP,the wear volume decreased by 94.11%compared with the base slurry.The contact resistance experiment during the friction process shows that SOP can form a thick adsorption film on the friction surface under high temperature and high salt conditions,thus effectively reducing the friction resistance.Molecular dynamics simulation shows that lubricant SOP can be physically adsorbed on the surface of drilling tool and borehole wall through hydrogen bond and van der Waals force.XPS analysis further shows that SOP adsorbs on the friction surface and reacts with metal atoms on the friction surface to form a chemically reactive film.Therefore,under high temperature and high salt conditions,the synergistic effect of physical adsorption film and chemical reaction film effectively reduces the frictional resistance and wear of the friction surface.In addition,SOP is non-toxic and easy to degrade.Therefore,SOP is a highly effective and environmentally friendly lubricant in high temperature and high salt drilling fluid.

Water-Based Environmentally Friendly Pesticide Formulations Based on Cyclodextrin/Pesticide Loading System

Difenoconazole(DIF)is a representative variety of broad-spectrum triazole fungicides and liposoluble pesticides.However,the water solubility of DIF is so poor that its application is limited in plant protection.In addition,the conventional formulations of DIF always contain abundant organic solvents,which may cause pollution of the environment.In this study,two DIF/cyclodextrins(CDs)inclusion complexes(ICs)were successfully prepared,which were DIF/β-CD IC and DIF/hydroxypropyl-β-CD IC(DIF/HP-β-CD IC).The effect of cyclodextrins on the water solubility and the antifungal effect of liposoluble DIF pesticide were investigated.According to the phase solubility test,the molar ratio and apparent stability constant of ICs were obtained.Fourier transform infrared spectroscopy,thermal gravity analysis,X-ray diffraction and scanning electron microscopy were used systematically to characterize the formation and characteristics of ICs.The results noted that DIF successfully entered the cavities of two CDs.In addition,the antifungal effect test proved the better performance of DIF/HP-β-CD IC,which exceeded that of DIF emulsifiable concentrate.Therefore,our study provides informative direction for the intelligent use of liposoluble pesticides with cyclodextrins to develop water-based environmentally friendly formulations.

Synthesis and Kinetics of Hydrogenated Rosin Dodecyl Ester as an Environmentally Friendly Plasticizer

The plasticizer is an important polymer material additive.Non-toxic and environmentally friendly plasticizers are developed recently in order to decrease fossil fuel reserves,serious environmental pollution and the toxicity of phthalate esters.In this study,a new,efficient and environmentally friendly plasticizer of hydrogenated rosin dodecyl ester was prepared by an esterification reaction of hydrogenated rosin and dodecanol.The influences of different reaction conditions(including different catalysts,the catalyst concentration,the ratio of the reactants,reaction temperature,and reaction time)on the esterification yield are examined and discussed.Hydrogenated rosin dodecyl ester with 71.8%yield was synthesized under the optimized reaction conditions(1:0.8 molar ratio of rosin to dodecanol,1 mol%tetrabutyl titanate concentration,and 210℃for 6 h).The esterification reaction is a second-order reaction,and kinetic calculations showed that the activation energy is 39.77 KJ·mol^(−1).The structure of the hydrogenated rosin dodecyl ester was confirmed by FT-IR spectroscopy and^(13)C NMR spectrum.Besides,the thermal stability of target product(hydrogenated rosin dodecyl ester)was also tested by thermal gravimetric analysis(TGA),which showed a good thermal stability.

Notoginsenoside as an environmentally friendly shale inhibitor in water-based drilling fluid

The demand for non-toxic and biodegradable shale inhibitors is growing in the drilling industry.In this paper,the effect of notoginsenoside(NS)as a new,environmentally friendly inhibitor of shale hydration is systematically studied for the first time.The inhibition performance of NS was evaluated via inhibition evaluation tests,including mud ball immersion tests,linear expansion tests,shale rolling recovery tests,and compressive strength tests.The inhibition mechanism of NS was analyzed using Fourier transform infrared spectroscopy(FTIR),contact angle measurements,particle size distribution determination,thermogravimetric analysis(TGA),and scanning electron microscopy(SEM).The experimental results demonstrate that NS is able to adhere to the clay surface,forming a hydrophobic film that prevents the entry of water molecules and inhibiting the hydration dispersion of the clay.Because of this,NS can maintain the original state of bentonite pellets in water,which can effectively reduce the swelling rate of bentonite,increase the recovery rate of shale drill cuttings,maintain the strength of the shale,and therefore maintain the stability of the borehole wall during drilling.In addition,NS is non-toxic,degradable,and compatible with water-based drilling fluids.The above advantages make NS a promising candidate for use as an environmentally friendly shale inhibitor.

Synthesis of 3-(1-Cyclohexenyl)-2-butanone via Environmentally Friendly Catalysts

We substituted several environmentally friendly catalysts which included HY and H- β zeolites, various cation-exchanged β zeolites, and solid-supported ferric chloride for conventional catalysts for the synthesis of 3-(1-cyclohexenyl)-2-butanone from the reaction of ethylidenecyclohexane with acetic anhydride at room temperature. HY zeolite was found to be the most effective for this reaction, and gave the acylated product in a 72% yield under the conditions of n (ethylidenecyclohexane)/ n (acetic anhydride)/ m (HY zeolite)=1 mmol/10 mmol/0 100 g, reaction temperature 25 ℃ and reaction time 2 h. The used HY zeolite can be recovered, regenerated and gave almost the same yield as the fresh one. The lifetime of the HY zeolite is over 80 h. The effect of different factors on the reaction has also been investigated.

Development of Environmentally Friendly and Energy Efficient Refrigerants for Refrigeration Systems

This paper presents the improvement of eco-friendly and power consumption saving refrigerants for refrigeration systems.The novel azeotropic refrigerant mixtures of HFCs and HCs can replace refrigeration systems,and using the R134,R32,R125,and R1270 refrigerants in several compositions found using the decision tree function of the RapidMiner software(which camefirst in the KDnuggets annual software poll).All refrigerant results are mixed of POE,which is A1 classification refrigerant,non-flammable,and innocuous refrigerant,and using REFPROP software and CYCLE_D-HX software are under the CAN/ANSI/AHRI540 standards.The boiling point of the new refrigerant mix R-No.595 is 4.58%,lower than that of R404A,with a higher refrigerant effect and 50.34%lower GWP value than R404A.The proposed mix R-No.595 can be operated in hot environmental country and has high critical temperature and heat-rejection effects,due to the presence of R32 and R1270.The COPc of R463A is 13.49%,higher than R404A in freeze condition.The novel refrigerant mixes provide alternate refrig-erant options mixed of 1%R1270,and which are related with the development of current refrigerants,containing a compose of HFOs and eco refrigerants for producing low-GWP,zero ODP,high-refrigerant effect,low-operating pressure,and innocuous refrigerants.

Analysis of the Environment-friendly Synthesis Approach and Technology Based on CO_2 Instead of the Organic Carbon Sources in Coal and Oil

The ways and technology of synthesis of alcohol, ether, ester, amine ester, lactone, polyester, carbamide and diamond based on CO2 were explored. Using CO2 as potential organic carbon resources not only solves environmental problem, but also eases shortage of resources.

Sustainable Development of Agriculture and Animal Husbandry in Tibet Based on "Resource Saving and Environment Friendly"

During the ＂13th five-year＂ period,Tibet is building a well-off society in an all-round way and constructing a harmonious socialist new countryside. The pace of economic construction in the west is advanced step by step,and all kinds of economic construction subjects show obvious increasing trend. As one of the regions with rich agriculture and animal husbandry resources,it is inevitable to face the problems that wild resources are gradually consumed,and environmental pollution is severe in Tibet. While developing the economy,it must not damage the environment. To a certain extent,the resource and environment infrastructure is the material basis for economic development. With the gradual progress of economic construction,improvement of residents＇ living standards,and updating of consumption structure,it needs to build,produce and live in the environment of ＂ beautiful Tibet with clean water,blue sky and green＂. In this paper,based on resource-saving and environment-friendly angle,it sufficiently understands the importance and urgency of accelerating sustainable development of agriculture and animal husbandry in Tibet from the global and strategic heights. It should accelerate Tibet agriculture and animal husbandry taking ＂ resource-saving and environment-friendly＂,put the sustainable development of agriculture and animal husbandry in an important historical development opportunity,and impel large economic development of plateau agriculture and animal husbandry.

Numerical Investigations on Supercritical Heat Transfer Characteristics of Environmental Friendly Refrigerants

The heat transfer of supercritical fluids is a vastly growing field, specifically to find suitable alternatives to replace conventional R134a, which can be beneficial for climate change. Most of the experimental and numerical investigations have been conducted to explore supercritical water, carbon dioxide and R134a as heat transfer working fluids. Hydrofluoroolefin (HFO) and refrigerants blends have been considered the most environment-friendly refrigerants to replace Chlorofluorocarbons (CFCs), Hydrochlorofluoro-carbons (HCFCs) and Hydrofluorocarbons (HFCs). Their main advantage of zero Ozone Depletion Potential (ODP) and comparatively lower Global Warming Potential (GWP) have attracted growing amount of attention to mitigate environmental issues. This work adopts the computational method and takes the environmentally friendly refrigerants to investigate the heat transfer characteristics under widely used shear-stress transport (SST) model. A comprehensive comparison was performed at reduced pressure of 1.10 for supercritical fluids R515A, R1234ze(E) and R134a. The peaks of heat transfer coefficient occurred in the vicinity of pseudo critical temperature for all of these considered fluids;however, R134a resulted in higher heat transfer coefficient, Reynolds number and Prandtl number in comparison with R515A and R1234ze(E). The higher heat transfer coefficient of supercritical fluid R134a is owing to its thermophysical properties and the specific heat plays crucial role in the heat transfer of supercritical fluids. Owing to environmental issues, R515A can be a considerable replacement of R134a. R1234ze(E) is also promising alternative to R134a;however, safety issues should thoroughly concern its mild flammable characteristics.

The ergonomic,environment friendly,greener,and scalable SlidyBike is especially for you

The Sliding Bike is a patented new product that perfectly combines bike functionality and mechanical principles.Our models before 2014 used only horizontal sliding mechanism,and they were awarded invention golden medals in Seoul,Geneva,Pittsburgh,and Taipei,and the Japan GD

Research and Application of an Environmental-Friendly Low-Damage and High Salt-Resistance Slick Water Fracturing Fluid System

The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce water resources on the site. These unfavorable factors have brought great difficulties to the on-site mining process. Now, a nano-composite green environmental protection slick water fracturing fluid system CQFR can be quickly dissolved because of the larger specific surface area, and the small molecular size makes the damage to the reservoir less than 5%, and the average drag reduction effect can reach more than 73%. It can quickly and well dissolve and maintain performance under high salinity conditions and fracturing flowback fluids. It responds well to the complex reservoir conditions on the construction site and makes the flowback fluid recyable, which greatly reduces the consumption of water resources on the construction site and effectively improves the construction efficiency and economic benefits.

Utilization of Basalt Saw Mud as a Spherical Porous Functional Aggregate for the Preparation of Ordinary Structure Concrete

To promote the production and application of artificial aggregates,save natural sand resources and protect the ecological environment,we evaluated the feasibility of using spherical porous functional aggregates(SPFAs) formed by basalt saw mud under autoclave curing in ordinary structural concrete.In our work,two types of prewetted functional aggregates were taken as replacements for natural aggregates with different volume substitution rates(0%,5%,10%,15%,20%,25%,and 30%) in the preparation of ordinary structural concrete with water-to-binder ratios(W/B) of 0.48 and 0.33.The effects of the functional aggregate properties and content,W/B,and curing age on the fluidity,density,mechanical properties and autogenous shrinkage of ordinary concrete were analyzed.The experimental results showed that the density of concrete declined at a rate of not more than 5%,and the 28 d compressive strength could reach 31.0-68.2 MPa.Low W/B,long curing age and high-quality functional aggregates were conducive to enhancing the mechanical properties of SPFAs concrete.Through the rolling effects,SPFAs can optimize the particle gradation of aggregate systems and improve the fluidity of concrete,and the water stored inside SPFAs provides an internal curing effect,which prolongs the cement hydration process and considerably reduces the autogenous shrinkage of concrete.SPFAs exhibits high strength and high density,as well as being more cost-effective and ecological,and is expected to be widely employed in ordinary structural concrete.

Novel Soft ComputingModel for Predicting Blast-Induced Ground Vibration in Open-Pit Mines Based on the Bagging and Sibling of Extra Trees Models

This study considered and predicted blast-induced ground vibration(PPV)in open-pit mines using bagging and sibling techniques under the rigorous combination of machine learning algorithms.Accordingly,four machine learning algorithms,including support vector regression(SVR),extra trees(ExTree),K-nearest neighbors(KNN),and decision tree regression(DTR),were used as the base models for the purposes of combination and PPV initial prediction.The bagging regressor(BA)was then applied to combine these base models with the efforts of variance reduction,overfitting elimination,and generating more robust predictive models,abbreviated as BA-ExTree,BAKNN,BA-SVR,and BA-DTR.It is emphasized that the ExTree model has not been considered for predicting blastinduced ground vibration before,and the bagging of ExTree is an innovation aiming to improve the accuracy of the inherently ExTree model,as well.In addition,two empirical models(i.e.,USBM and Ambraseys)were also treated and compared with the bagging models to gain a comprehensive assessment.With this aim,we collected 300 blasting events with different parameters at the Sin Quyen copper mine(Vietnam),and the produced PPV values were also measured.They were then compiled as the dataset to develop the PPV predictive models.The results revealed that the bagging models provided better performance than the empirical models,except for the BA-DTR model.Of those,the BA-ExTree is the best model with the highest accuracy(i.e.,88.8%).Whereas,the empirical models only provided the accuracy from 73.6%–76%.The details of comparisons and assessments were also presented in this study.

Environmentally friendly expanded graphite-doped ZnO superhydrophobic coating with good corrosion resistance in marine environment

Designing and fabricating the marine anti-corrosion materials without fluorine by superhydrophobic method is a huge challenge. In this study, an environmentally friendly composite coating was prepared by combing modified expanded graphite(EAG) with nano zinc oxide(ZnO). This coating showed superhydrophobic surface and good corrosion resistance. Fourier transform infrared spectroscopy(FITR), X-ray diffraction(XRD),and scanning electron microscopy(SEM) were used to characterize the materials in fabricating process of the coating. The properties of three composite coatings(ZnO,EAG, and EAG@ZnO) were analyzed, including surface roughness, water contact angle, corrosion resistance, selfcleaning and anti-fouling. The combination of ZnO and EAG caused a big water contact angle, leading superhydrophobic surface of the composite coatings. The electrochemical results showed that the superhydrophobic EAG@ZnO coating had a larger capacitive arc diameter and charge transfer resistance, indicating the enhanced anti-corrosion resistance. Meanwhile, the EAG@ZnO coating also showed good self-cleaning and anti-fouling performance according to solid and liquid pollutants tests.In addition, the mechanical properties and stability of the superhydrophobic EAG@ZnO coatings were evaluated by knife peeling and finger scratch tests. In summary, these superhydrophobic and anti-fouling EAG@ZnO composite coatings provide a potential application in marine corrosion and protection field.

Carbonate-activated binder modified by supplementary materials for mine backfill and the associated heavy metal immobilization effects

Cemented paste backfill(CPB)is one of the effective methods for resource utilization of tailings,but the high cost of ordinary Portland cement(OPC)limits its utilization.Considering the poor performance of Na_(2)CO_(3)-activated binders,in this work,supplementary materials,including CaO,MgO,and calcined layered double hydroxide(CLDH),were used to modify their properties with the aim of finding an alternative binder to OPC.Isothermal calorimetry,X-ray diffraction,and thermogravimetric analyses were conducted to explore the reaction kinetics and phase assembles of the binder.The properties of the CPB samples,such as flowability,strength development,and heavy metal immobilization effects,were then investigated.The results show that the coupling utilization of MgO and CLDH showed good performance.The strength of the Mg_(2)-CLDH_(3) sample was approximately 2.94 MPa after curing for 56 d,which was higher than that of the OPC-based sample.Moreover the cost of the modified Na_(2)CO_(3)-activated binder was lower than that of the OPC-based binder.Modified sample showed satisfactory heavy metal immobilization effects.These findings demonstrate that carbonate-activated binder modified by supplementary materials can be suitable in CPB.

Environmentally Friendly Sizing Strategy for PBO Fiber-reinforced Composites through Building Carbon Nanosphere Coatings

Sizing treatment has shown great potential in improving the interfacial properties of poly(p-phenylene benzodioxazole)(PBO)fiber-reinforced composites,but is severely limited due to the use of flammable and explosive organic solvents.Herein,a new high-efficiency waterborne sizing agent has been developed by using functionalized carbon nanospheres(CNSs)as a nano-reinforcement.Due to abundant oxygen-containing groups,the CNSs greatly improves the surface activity,wettability,and roughness of the PBO fibers.As a result,the interfacial shear strength of the CNSs sized fiber-reinforced composite increases by 79.6%compared with that of the pristine fiber-reinforced composite.Moreover,the excellent mechanical and thermal properties of the PBO fibers remain almost unchanged after sizing treatment.Thus,this work provides an environmentally friendly and scalable method for constructing a strong interface between the PBO fibers and the matrix resins,which makes sense in promoting the application of PBO fiber-reinforced composites in aerospace and military industries.

A purely green approach to low-cost mass production of zeolitic imidazolate frameworks

Although zeolitic imidazolate frameworks(ZIFs)have bright prospects in wide fields like gas storage/separation,catalysis and medicine,etc.,their large-scale applications are bottlenecked by the absence of their low-cost commercial production technique.Here,we report an uncon ventional method suitable for environmentally friendly and low-cost mass-production of ZIFs.In this method,taking the synthesis of ZIF-8 as an example,ZnO was used instead of Zn(NO_(3))_(2) in traditional solvent synthesis methods and CO_(2) was introduced to dissolve ZnO in aqueous solution of 2-methylimidazole(HMeim)and form water soluble salt([ZnMeim]^(+)[MeimCOO]^(-))at room temperature.Then,by removing CO_(2) through heating or vacuuming,Meim-ions are produced and instantaneously assemble with[ZnMeim]^(+)s to generate ZIF-8 without any by product.Due to the absence of strong acid anions(such as NO^(-)_(3) and Cl^(-) et al.)in solution,the washing of filter cake required in the conventional approaches could be omitted and the filtrate containing only water and HMeim could be reused completely.This method is really green as no waste gas or liquid generates because CO_(2) and water could be recycled perfectly.It overcomes almost all bottlenecks occurred in commercial production of ZIF-8 when using traditional methods.A pilot plant was established for mass-production of ZIF-8 and hundreds kilograms of ZIF-8 was produced,which indicates that the new method is not only environmentally friendly but also low cost and commercial accessibility.It is expected that the new method would open an avenue for commercial applications of ZIFs.

Progress in the technology of energy conversion from woody biomass in Indonesia

Sustainable and renewable natural resources as biomass that contains carbon and hydrogen elements can be a potential raw materials for energy conversion. In Indonesia, they comprise variable-sized wood from forests （i.e. natural forests, plantations and community forests that commonly produce small-diameter logs used as firewood by local people）, woody residues from logging and wood industries, oil-palm shell waste from crude palm oil factories, coconut shell wastes from coconut plantations, traditional markets as well as skimmed coconut oil and straws from rice cultivation. Four kinds of energy-conversion technologies have been empirically tested in Indonesia. First, gasification of rubber wood from unproductive rubber trees to generate heat energy for the drying of fermented chocolate seeds. Secondly, energy conversion from organic vegetable waste by implementing thermophylic fermentation methods that produce biogas as a fuel and for generating electricity and also concurrently generate organic by-products called hygen compost. Thirdly, gasification of charcoal and wood sawdust for electricity generation. Finally, environment-friendly energy conversion by carbonizing small-diameter logs, sawdust, wood slabs and coconut shells into charcoal. This yielded charcoal integrated with wood vinegar production through condensation of smoke/vapors emitted during carbonization, thereby mitigating the impact of air pollution. Among the four experimental technologies that of integrated charcoal and wood vinegar production had been spectacularly developed and favored by rural communities. This technology brought added value to the process and product due to the wood vinegar, useful as bio-pesticide, plant-growth hormone and organic fertilizer. Such integrated and environment-friendly production, therefore, should be sustained, because Indonesia occupies a significant and worldwide position as charcoal-producing and marketing country. The technology of integrated wood vinegar-charcoal production hence deserves its dissemination throughout Indonesia, particularly to the charcoal industry that still produces charcoal without condensing the generated vapor/smoke, hence polluting the air.

Tribological evaluation of environmentally friendly ionic liquids derived from renewable biomaterials

Unlike most of the conventional ionic liquids(ILs) derived from non-renewable resources, five environmentally friendly ILs([Ch][AA] ILs) derived from amino acids(AAs) and choline(Ch) were synthesized using biomaterials by a simple, green route: acid–base reaction of Ch and AAs. The thermal and corrosion properties, as well as viscosity, of the prepared ILs were examined. The results revealed that the anion structure of ILs plays a dominant role in their thermal and viscosity behavior. These ILs exhibited less corrosion toward copper, related to their halogen-, sulfur-, and phosphorus-free characteristics. The tribological behavior of the synthesized ILs was examined using a Schwingungs Reibung und Verschleiss tester, and the results indicated that these ILs exhibit good friction-reducing and anti-wear properties as lubricants for steel/steel contact. Results from energy-dispersive spectroscopy and X-ray photoelectron spectroscopy indicated that the good tribological properties of [Ch][AA] ILs are related to the formation of a physically adsorbed film on the metal surface during friction.