Based on the high frequency (HF) integrated radar cross section (RCS) calculation approach, a technique of detecting major scattering source is developed by using an appropriate arithmetic for scattering distribut...Based on the high frequency (HF) integrated radar cross section (RCS) calculation approach, a technique of detecting major scattering source is developed by using an appropriate arithmetic for scattering distribution and scattering source detection. For the perfect adaptability to targets and the HF of the HF integrated RCS calculation platform, this technique is suitable to solve large complex targets and has lower requirement to the target modeling. A comparison with the result of 2-D radar imaging confirms the accuracy and reliability of this technique in recognition of the major scattering source on complex targets. This technique provides the foundation for rapid integrated evaluation of the scattering performance and 3-D scattering model reconstruction of large complex targets.展开更多
Silver indium cadmium(Ag–In–Cd) control rod is widely used in pressurized water reactor nuclear power plants,and it is continuously consumed in a high neutron flux environment. The mass ratio of ^(107)Ag in the Ag...Silver indium cadmium(Ag–In–Cd) control rod is widely used in pressurized water reactor nuclear power plants,and it is continuously consumed in a high neutron flux environment. The mass ratio of ^(107)Ag in the Ag–In–Cd control rod is 41.44%. To accurately calculate the consumption value of the control rod, a reliable neutron reaction cross section of the ^(107)Ag is required. Meanwhile,^(107)Ag is also an important weak r nucleus. Thus, the cross sections for neutron induced interactions with ^(107)Ag are very important both in nuclear energy and nuclear astrophysics. The(n, γ) cross section of ^(107)Ag has been measured in the energy range of 1–60 eV using a back streaming white neutron beam line at China spallation neutron source. The resonance parameters are extracted by an R-matrix code. All the cross section of ^(107)Ag and resonance parameters are given in this paper as datasets. The datasets are openly available at http://www.doi.org/10.11922/sciencedb.j00113.00010.展开更多
The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis (DEA) extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit (DM...The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis (DEA) extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit (DMU) with the best practice and to rank the DMUs by their respective cross-efficiency scores. The main drawbacks of the cross-efficiency evaluation method when the ultimate average cross-efficiency scores are used to evalu- ate and rank the DMUs are also pointed out. With the research gap, an improved technique for order preference by similarity to ideal solution (TOPSIS) is introduced to rank the crossfficiency by eliminating the average assumption. Finally, an empirical example is illustrated to examine the validity of the proposed method.展开更多
Passive image interferometry (PII) is becoming a powerful tool for detecting the temporal variations in the Earth's structure, which applies coda wave interferometry to the waveforrns from the cross-correlation of ...Passive image interferometry (PII) is becoming a powerful tool for detecting the temporal variations in the Earth's structure, which applies coda wave interferometry to the waveforrns from the cross-correlation of seismic ambient noise. There are four techniques for estimating temporal change of seismic velocity with PII: moving-window cross-correlation technique (MWCCT), moving-window cross-spectrum technique (MWCST), stretching technique (ST) and moving-window stretching technique (MWST). In this paper, we use the continuous seismic records from a typical station pair near the Wenchuan Ms8.0 earthquake fault zone and generate three sets of waveforms by stacking cross-correlation function of ambient noise with different numbers of days, and then apply four techniques to processing the three sets of waveforms and compare their results. Our results indicate that the techniques based on moving-window (MWCCT, MWCST and MWST) are superior in detecting the change of seismic velocity, and the MWCST can give a better estimate of velocity change than the other moving-window techniques due to measurement error. We also investigate the clock errors and their influences on measuring velocity change. We find that when the clock errors are not very large, they have limited impact on the estimate of the velocity change with the moving-window techniques.展开更多
The neutron capture cross sections(n,γ)of bromine were obtained using the time-of-flight technique at the Back-n facility of the China Spallation Neutron Source.Promptγ-rays originating from neutron-induced capture ...The neutron capture cross sections(n,γ)of bromine were obtained using the time-of-flight technique at the Back-n facility of the China Spallation Neutron Source.Promptγ-rays originating from neutron-induced capture events were detected using four C_(6)D_(6) detectors.The pulse-height weighting technique and double-bunch unfolding method based on Bayesian theory were used in the data analysis.Background deductions,normalization,and corrections were carefully considered to obtain reliable measurement results.The multilevel R-matrix Bayesian code SAMMY was used to extract the resonance parameters in the resolved resonance region(RRR).The average cross sections in the unresolved resonance region(URR)were obtained from 10 to 400 keV.The experimental results were compared with data from several evaluated libraries and previous experi-ments in the RRR and URR.The TALYS code was used to describe the average cross sections in the URR.The astrophysical Maxwell average cross sections(MACSs)of ^(79,81)Br from kT=5 to 100 keV were calculated over a sufficiently wide range of neutron energies.At a thermal energy of kT=30 keV,the MACS value for ^(79)Br 682±68 mb was in good agreement with the KADoNiS v1.0 recommended value.By contrast,the value of 293±29 mb for ^(81)Br was substantially higher than that of the evaluated database and the KADoNiS v1.0 recommended value.展开更多
高校是国家创新体系的重要组成部分,为深入分析新形势下高校科技创新效率,完善高校科技创新效率评价方法,综合运用数据包络分析(data envelopment analysis,DEA)模型和基于信息熵法的理想点模型(technique for order preference by simi...高校是国家创新体系的重要组成部分,为深入分析新形势下高校科技创新效率,完善高校科技创新效率评价方法,综合运用数据包络分析(data envelopment analysis,DEA)模型和基于信息熵法的理想点模型(technique for order preference by similarity to an ideal solution model,TOPSIS),以天津市区域14所高校为例,对比分析了新形势下高校科技创新效率。基于DEA模型的分析结果表明,14所高校科技创新效率总体呈不规律波动趋势,即使继续加大投入力度,也仅能获得科技成果产出规模有限的增加;基于TOPSIS模型的分析结果表明,14所高校科技创新效率总体呈上升发展趋势,可继续加大投入力度,以促进科技成果更大规模地产出。通过两个模型的综合运用,实现了评价结果的交叉验证,为新形势下高校科技创新效率评价提供了新思路。展开更多
Cross sections of <sup>64</sup>(n,γ) <sup> </sup>(65)Zn reaction are measured in the energy range from 156to 1150 keV by the activation technique. The activities of the products are counte...Cross sections of <sup>64</sup>(n,γ) <sup> </sup>(65)Zn reaction are measured in the energy range from 156to 1150 keV by the activation technique. The activities of the products are counted with a highresolution HPGe γ-ray spectrometer. The neutron fluence is determined by <sup> </sup>(197)Au(n,γ) <sup> </sup>(198)Aucross section. Experimental activation cross sections are given for the first time. The errors ofthe measured results are 5%-8%.展开更多
In this paper, an improved approach is presented to reconstruct two dimensional conduc- tor profile illuminated by incident plane waves of multiple frequencies and directions via amplitudes of backscattered field in n...In this paper, an improved approach is presented to reconstruct two dimensional conduc- tor profile illuminated by incident plane waves of multiple frequencies and directions via amplitudes of backscattered field in near regions. Newton-Kantorovitch algorithm is adopted to cast the non- linear coupled integral equations into linearized form, method of moment is used to transform the above linearized integral equations into matrix form, the resulting ill-posed overdetermined linear equations are solved using pseudoinverse technique based on Gram-Schedmit orthogonal procedure. Initial values are determined by solving a nonlinear least aquare error problem to establish an equivat lent circular cylinder. The effects of various parameters on reconstruction quality are discussed with numerical results and analysis.展开更多
The Istanbul GPS Triangulation Network(IGTN) and the Istanbul Levelling Network(ILN),established in2006,provide data for the determination of a local GNSS/levelling geoid model.These networks’ measurements were done ...The Istanbul GPS Triangulation Network(IGTN) and the Istanbul Levelling Network(ILN),established in2006,provide data for the determination of a local GNSS/levelling geoid model.These networks’ measurements were done separately on both the Asian and European sides of the Bosphorus Strait in the vicinity of Istanbul.To connect these regions for those networks,a Valley Cross Levelling(VCL) data set,acquired in 1986 and 2004,was used.The use of this VCL data set was challenging in calculating the Istanbul geoid model,primarily because of its errors.In this study,this challenge was overcome through newly collected VCL data in 2010,allowing for the readjustment of the ILN and the newly collected VCL data set.The Istanbul geoid model was computed using soft computing techniques including the adaptive-network-based fuzzy inference system(ANFIS) and the artificial neural networks(ANNs).The resulting Istanbul GNSS/levelling geoid model is shown to be more reliable when compared with the model computed using conventional interpolation techniques.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.90305026)
文摘Based on the high frequency (HF) integrated radar cross section (RCS) calculation approach, a technique of detecting major scattering source is developed by using an appropriate arithmetic for scattering distribution and scattering source detection. For the perfect adaptability to targets and the HF of the HF integrated RCS calculation platform, this technique is suitable to solve large complex targets and has lower requirement to the target modeling. A comparison with the result of 2-D radar imaging confirms the accuracy and reliability of this technique in recognition of the major scattering source on complex targets. This technique provides the foundation for rapid integrated evaluation of the scattering performance and 3-D scattering model reconstruction of large complex targets.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11875311, 11905274, 1705156, U2032146, 11865010, 11765015, and 1160509)the Natural Science Foundation of Inner Mongolia, China (Grant Nos. 2019JQ01 and 2018MS01009)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB34030000)。
文摘Silver indium cadmium(Ag–In–Cd) control rod is widely used in pressurized water reactor nuclear power plants,and it is continuously consumed in a high neutron flux environment. The mass ratio of ^(107)Ag in the Ag–In–Cd control rod is 41.44%. To accurately calculate the consumption value of the control rod, a reliable neutron reaction cross section of the ^(107)Ag is required. Meanwhile,^(107)Ag is also an important weak r nucleus. Thus, the cross sections for neutron induced interactions with ^(107)Ag are very important both in nuclear energy and nuclear astrophysics. The(n, γ) cross section of ^(107)Ag has been measured in the energy range of 1–60 eV using a back streaming white neutron beam line at China spallation neutron source. The resonance parameters are extracted by an R-matrix code. All the cross section of ^(107)Ag and resonance parameters are given in this paper as datasets. The datasets are openly available at http://www.doi.org/10.11922/sciencedb.j00113.00010.
基金supported by the National Natural Science Foundation of China for Innovative Research Groups(70821001),the National Natural Science Foundation of China(70901069)the Special Fund for the Gainers of Excellent Ph.D.'s Dissertations and Dean's Scholarships of Chinese Academy of Sciences,the Research Fund for the Doctoral Program of Higher Education of China for New Teachers(20093402120013)+1 种基金the Research Fund for the Excellent Youth Scholars of Higher School of Anhui Province of China(2010SQRW001ZD)the Social Science Research Fund for Higher School of Anhui Province of China
文摘The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis (DEA) extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit (DMU) with the best practice and to rank the DMUs by their respective cross-efficiency scores. The main drawbacks of the cross-efficiency evaluation method when the ultimate average cross-efficiency scores are used to evalu- ate and rank the DMUs are also pointed out. With the research gap, an improved technique for order preference by similarity to ideal solution (TOPSIS) is introduced to rank the crossfficiency by eliminating the average assumption. Finally, an empirical example is illustrated to examine the validity of the proposed method.
基金supported by National Natural Science Foundation of China (No. 41074061)Basic Research Plan of the Institute of Earthquake Science, China Earthquake Administration (No. 2007-13)
文摘Passive image interferometry (PII) is becoming a powerful tool for detecting the temporal variations in the Earth's structure, which applies coda wave interferometry to the waveforrns from the cross-correlation of seismic ambient noise. There are four techniques for estimating temporal change of seismic velocity with PII: moving-window cross-correlation technique (MWCCT), moving-window cross-spectrum technique (MWCST), stretching technique (ST) and moving-window stretching technique (MWST). In this paper, we use the continuous seismic records from a typical station pair near the Wenchuan Ms8.0 earthquake fault zone and generate three sets of waveforms by stacking cross-correlation function of ambient noise with different numbers of days, and then apply four techniques to processing the three sets of waveforms and compare their results. Our results indicate that the techniques based on moving-window (MWCCT, MWCST and MWST) are superior in detecting the change of seismic velocity, and the MWCST can give a better estimate of velocity change than the other moving-window techniques due to measurement error. We also investigate the clock errors and their influences on measuring velocity change. We find that when the clock errors are not very large, they have limited impact on the estimate of the velocity change with the moving-window techniques.
基金This work was supported by the National Natural Science Foundation of China(Nos.U1832182,11875328,11761161001,and U2032137)the Natural Science Foundation of Guangdong Province,China(Nos.18zxxt65 and 2022A1515011184)+3 种基金the Science and Technology Development Fund,Macao SAR(Grant No.008/2017/AFJ)the Macao Young Scholars Program of China(No.AM201907)the China Postdoctoral Science Foundation(Nos.2016LH0045 and 2017M621573)the Fundamental Research Funds for the Central Universities(Nos.22qntd3101 and 2021qntd28).
文摘The neutron capture cross sections(n,γ)of bromine were obtained using the time-of-flight technique at the Back-n facility of the China Spallation Neutron Source.Promptγ-rays originating from neutron-induced capture events were detected using four C_(6)D_(6) detectors.The pulse-height weighting technique and double-bunch unfolding method based on Bayesian theory were used in the data analysis.Background deductions,normalization,and corrections were carefully considered to obtain reliable measurement results.The multilevel R-matrix Bayesian code SAMMY was used to extract the resonance parameters in the resolved resonance region(RRR).The average cross sections in the unresolved resonance region(URR)were obtained from 10 to 400 keV.The experimental results were compared with data from several evaluated libraries and previous experi-ments in the RRR and URR.The TALYS code was used to describe the average cross sections in the URR.The astrophysical Maxwell average cross sections(MACSs)of ^(79,81)Br from kT=5 to 100 keV were calculated over a sufficiently wide range of neutron energies.At a thermal energy of kT=30 keV,the MACS value for ^(79)Br 682±68 mb was in good agreement with the KADoNiS v1.0 recommended value.By contrast,the value of 293±29 mb for ^(81)Br was substantially higher than that of the evaluated database and the KADoNiS v1.0 recommended value.
文摘高校是国家创新体系的重要组成部分,为深入分析新形势下高校科技创新效率,完善高校科技创新效率评价方法,综合运用数据包络分析(data envelopment analysis,DEA)模型和基于信息熵法的理想点模型(technique for order preference by similarity to an ideal solution model,TOPSIS),以天津市区域14所高校为例,对比分析了新形势下高校科技创新效率。基于DEA模型的分析结果表明,14所高校科技创新效率总体呈不规律波动趋势,即使继续加大投入力度,也仅能获得科技成果产出规模有限的增加;基于TOPSIS模型的分析结果表明,14所高校科技创新效率总体呈上升发展趋势,可继续加大投入力度,以促进科技成果更大规模地产出。通过两个模型的综合运用,实现了评价结果的交叉验证,为新形势下高校科技创新效率评价提供了新思路。
基金The project supported by China National Nuclear Corporation
文摘Cross sections of <sup>64</sup>(n,γ) <sup> </sup>(65)Zn reaction are measured in the energy range from 156to 1150 keV by the activation technique. The activities of the products are counted with a highresolution HPGe γ-ray spectrometer. The neutron fluence is determined by <sup> </sup>(197)Au(n,γ) <sup> </sup>(198)Aucross section. Experimental activation cross sections are given for the first time. The errors ofthe measured results are 5%-8%.
文摘In this paper, an improved approach is presented to reconstruct two dimensional conduc- tor profile illuminated by incident plane waves of multiple frequencies and directions via amplitudes of backscattered field in near regions. Newton-Kantorovitch algorithm is adopted to cast the non- linear coupled integral equations into linearized form, method of moment is used to transform the above linearized integral equations into matrix form, the resulting ill-posed overdetermined linear equations are solved using pseudoinverse technique based on Gram-Schedmit orthogonal procedure. Initial values are determined by solving a nonlinear least aquare error problem to establish an equivat lent circular cylinder. The effects of various parameters on reconstruction quality are discussed with numerical results and analysis.
基金the Fulbright Foundationsupported by The Scientific and Technological Research Council of Turkey with the grant number115Y237
文摘The Istanbul GPS Triangulation Network(IGTN) and the Istanbul Levelling Network(ILN),established in2006,provide data for the determination of a local GNSS/levelling geoid model.These networks’ measurements were done separately on both the Asian and European sides of the Bosphorus Strait in the vicinity of Istanbul.To connect these regions for those networks,a Valley Cross Levelling(VCL) data set,acquired in 1986 and 2004,was used.The use of this VCL data set was challenging in calculating the Istanbul geoid model,primarily because of its errors.In this study,this challenge was overcome through newly collected VCL data in 2010,allowing for the readjustment of the ILN and the newly collected VCL data set.The Istanbul geoid model was computed using soft computing techniques including the adaptive-network-based fuzzy inference system(ANFIS) and the artificial neural networks(ANNs).The resulting Istanbul GNSS/levelling geoid model is shown to be more reliable when compared with the model computed using conventional interpolation techniques.