A series of aviation lubrication oil 50-1-4φ samples were prepared with different RP-3 content, and then these sam- ples were analyzed by Fourier transform mid-infrared spectrometer （FTIR）. The infrared region of ...A series of aviation lubrication oil 50-1-4φ samples were prepared with different RP-3 content, and then these sam- ples were analyzed by Fourier transform mid-infrared spectrometer （FTIR）. The infrared region of 805--755 cm-1 was selected as quantitative area for determining fuel pollution level of aviation lubrication oil. Finally, correlation of the testing peak area and the fuel pollution level of corresponding samples were analyzed, and the regression equation was proposed. The results show that determining jet fuel pollution level of aviation lubricating oil by FTIR is feasible and reliable.展开更多
A method of synchronous-high-derivative spectfluor for identification of crude oil and fuel oil pollution is studied. The best operation conditions for the 2nd and 4th deriv, are set. To differentiate oil-spill at riv...A method of synchronous-high-derivative spectfluor for identification of crude oil and fuel oil pollution is studied. The best operation conditions for the 2nd and 4th deriv, are set. To differentiate oil-spill at river and sea, this method is rapid and simple, and the spectra have high resolution power as 'fingerprint'.展开更多
Residential low efficient fuel burning is a major source of many air pollutants produced during incomplete combustions, and household air pollution has been identified as one of the top environmental risk factors. Her...Residential low efficient fuel burning is a major source of many air pollutants produced during incomplete combustions, and household air pollution has been identified as one of the top environmental risk factors. Here we compiled literature-reported emission factors of pollutants including carbon monoxide（CO）, total suspended particles（TSPs）, PM2.5, organic carbon（OC）,elemental carbon（EC） and polycyclic aromatic hydrocarbons（PAHs） for different household energy sources, and quantified the potential for emission reduction by clean fuel adoption. The burning of crop straws, firewood and coal chunks in residential stoves had high emissions per unit fuel mass but lower thermal efficiencies, resulting in high levels of pollution emissions per unit of useful energy, whereas pelletized biofuels and coal briquettes had lower pollutant emissions and higher thermal efficiencies. Briquetting coal may lead to 82%–88% CO, 74%–99%TSP, 73%–76% PM2.5, 64%–98% OC, 92%–99% EC and 80%–83% PAH reductions compared to raw chunk coal. Biomass pelletizing technology would achieve 88%–97% CO, 73%–87% TSP, 79%–88%PM2.5, 94%–96% OC, 91%–99% EC and 63%–96% PAH reduction compared to biomass burning. The adoption of gas fuels（i.e., liquid petroleum gas, natural gas） would achieve significant pollutant reduction, nearly 96% for targeted pollutants. The reduction is related not only to fuel change, but also to the usage of high efficiency stoves.展开更多
文摘A series of aviation lubrication oil 50-1-4φ samples were prepared with different RP-3 content, and then these sam- ples were analyzed by Fourier transform mid-infrared spectrometer （FTIR）. The infrared region of 805--755 cm-1 was selected as quantitative area for determining fuel pollution level of aviation lubrication oil. Finally, correlation of the testing peak area and the fuel pollution level of corresponding samples were analyzed, and the regression equation was proposed. The results show that determining jet fuel pollution level of aviation lubricating oil by FTIR is feasible and reliable.
文摘A method of synchronous-high-derivative spectfluor for identification of crude oil and fuel oil pollution is studied. The best operation conditions for the 2nd and 4th deriv, are set. To differentiate oil-spill at river and sea, this method is rapid and simple, and the spectra have high resolution power as 'fingerprint'.
基金Funding for the study was supported by the United Nation Foundation (No. RFP 13-1)the National Natural Science Foundation (No. 41301554)Jiangsu Natural Science Foundation (No. BK20131031)
文摘Residential low efficient fuel burning is a major source of many air pollutants produced during incomplete combustions, and household air pollution has been identified as one of the top environmental risk factors. Here we compiled literature-reported emission factors of pollutants including carbon monoxide（CO）, total suspended particles（TSPs）, PM2.5, organic carbon（OC）,elemental carbon（EC） and polycyclic aromatic hydrocarbons（PAHs） for different household energy sources, and quantified the potential for emission reduction by clean fuel adoption. The burning of crop straws, firewood and coal chunks in residential stoves had high emissions per unit fuel mass but lower thermal efficiencies, resulting in high levels of pollution emissions per unit of useful energy, whereas pelletized biofuels and coal briquettes had lower pollutant emissions and higher thermal efficiencies. Briquetting coal may lead to 82%–88% CO, 74%–99%TSP, 73%–76% PM2.5, 64%–98% OC, 92%–99% EC and 80%–83% PAH reductions compared to raw chunk coal. Biomass pelletizing technology would achieve 88%–97% CO, 73%–87% TSP, 79%–88%PM2.5, 94%–96% OC, 91%–99% EC and 63%–96% PAH reduction compared to biomass burning. The adoption of gas fuels（i.e., liquid petroleum gas, natural gas） would achieve significant pollutant reduction, nearly 96% for targeted pollutants. The reduction is related not only to fuel change, but also to the usage of high efficiency stoves.
