An impact sensitivity assessment method of spacecraft based on virtual exterior wall

The impact sensitivity assessment of spacecraft is to obtain the probability of spacecraft encountering the OD/M(orbital debris or meteoroid),which is a prerequisite for survivability assessment of on-orbit spacecraft.An impact sensitivity assessment method of spacecraft based on virtual exterior wall was proposed to improve the computational efficiency.This method eliminates determination of the outermost surface elements of the spacecraft before generating the debris rays,which are assumed to originate from a non-concave virtual wall that completely wraps the spacecraft.The Dist Mesh method was adopted for the generating of the virtual wall to ensure its mesh quality.The influences of the sizes,mesh densities,shapes of the virtual wall on the efficiency and accuracy were considered to obtain the best combination of the size and mesh density of the wall and spacecraft.The results of this method were compared with those of S3DE(Survivability of Spacecraft in Space Debris Environment),BUMPER,MDPANTO,ESABASE2/Debris to verify the feasibility of the method.The PCHIP(Piecewise Cubic Hermite Interpolating Polynomial)was used to fit the size vs.flux relationship of the space debris to acquire the impact probability of OD/M with arbitrary size on the spacecraft.

The Theoretically Studies and Field Testing of Self-Insulation Exterior Wall in the Hot Summer and Cold Winter Zone

The energy efficiency design of the exterior wall in the buildings of the hot summer and cold winter zone of China should consider the heat prevention in summer and the heat insulation in winter. The self-insulation of the exterior?wall is a more feasible design to satisfy the energy efficiency of buildings in the?zone. However, the systematic research is urgently needed for the self-insulation of the exterior wall in the hot summer and cold winter zone of China. The paper tested the thermal performance of the common non-clay materials such as shale sintered hollow brick, sand autoclaved aerated concrete block, etc. by means of indoor experiments. The energy efficiency effect of the common materials was verified using dynamic calculation soft PKPM and several constitutions of exterior wall with different main bricks and insulation materials on the heat bridge were simulated, too. Besides, the tests of the thermal performance of exterior wall in real constructions were carried out to testify the practical effect of the recommended constitutions of exterior wall with different main bricks and insulation materials on the heat bridge. The conclusions are: the physical and thermal properties of the six non-clay wall material are better than the clay porous brick;the thermal performance of the non-clay brick can be improved obviously through the rational arrangement of the holes;shale sintered hollow brick after increasing the holes and rationalizing the hole arrangement and sand autoclaved aerated concrete block are recommended for buildings in the hot summer and cold winter area of China. The dynamic calculation results show that the thermal performances?of the non-clay materials are all satisfied with the energy efficiency;The heat transfer coefficient of the exterior wall with composition?③,?in which?the main wall was sand autoclaved aerated concrete block and the material on the heat bridge was sand autoclaved aerated concrete plate, is the smallest among the three recommended compositions.

Improvement of UAV Based an Evaluation Approach to Mid-High Rise Buildings'Exterior Walls

This research will develop a set of assessment techniques and proce-dures for exterior wall deterioration detection.The proposed method is mainly based on equipped with high-resolution photographic equipment for unmanned aerial vehicle(UAV).To overcome the problems of visual inspection difficulties due to diferent angles and height,the proposed method provides a safer and more efficient detection way to get the buildings'exterior status.After using the pro-posed method to analyze the images taken from UAV,the size of the damaged area can be evaluated more accurately,and the accuracy rate of visual assessment will be significantly improved.The results of the proposed method can reduce the accidents caused by the inspection process in the critical environment and the costs incured by the temporary facilities without sacrificing the quality of the inspection results.Then,the research will implement the existing visual assessment method because of the characteristics of rapid detection,however,the assessment results will be different from different inspectors due to subjectivity.Thus,the research will present an improved visual inspection method by using UAV and Forward Looking Infred Thermal technology (FLIR).The result will be presented by Condition Index(CI-Level)instead to improve the subjectivity of the personnel.

Present Situation and Problems Analysis of Waterproof and Seal of Prefabricated Building Exterior Wall

With the continuous development and progress of China's social economy,the construction speed of our construction industry is also accelerating.Compared with the traditional cast-in-place reinforced concrete and masonry building,it has been unable to meet the requirements of the construction industry and the development of the times.Because the prefabricated building has the advantages of fast speed,water saving,land saving,noise reduction,material saving and energy saving in installation.Compared with traditional buildings,the prefabricated building is more energy efficient and practical.Therefore,the new type of precast assembly architecture is constantly highlighted and has become the mainstream of the development of the future construction industry.However,the technology started late in China,and the immature technology and imperfect supporting standards led to slow progress and even stagnation in China's construction industry.Through the analysis of the present situation and problems of the waterproof and sealing of the prefabricated building exterior walls,the suggestions for the healthy development of the construction industry in China are put forward in time.

Research on Building Exterior Wall Decoration and Its Energy Saving Optimization

This paper mainly uses the method of numerical simulation, and study thermal insulation and energy saving characteristics on the exterior walls of the building and analyze the optimal layout scheme of building exterior wall and thermal insulation system. Finally, the paper study optimal thickness of insulation materials. The paper elaborate scheme of the existing building energy-saving for exterior wall and the scope of application, the system structure and the construction technology. The results showed that： extruded benzene board that can be used for exterior insulation, frame structure filled with wall preferred ceramsite hollow block. The paper can provides reference selection of insulation for building external wall energy-saving transformation scheme.

Evaluation on Combustion Characteristics of Finishing Materials for Exterior Walls

Existing fire test methods reply on measurement of the energy released rate to identify the combustion properties of a material. However, they are inadequate when assessing combustion characteristics of a composite material characterized by vertical flame spread and different inside/outside combustion behaviors. In addition, major factors that affect the flame spread outside the building include the combustion characteristics of materials used as well as air flow around a skyscraper. However, since it is highly difficult to analyze and forecast the air flow from a fire engineering viewpoint, an investigation of the flame spread characteristics of exterior walls of a building depends primarily on the combustion characteristics of materials. Hence, this study examined, using ISO 13785-2 testing method, the temperature changes and vertical flame spread behaviors of one of the finishing materials for exterior walls--（generic ＆ fire-resistant） aluminium panels by a real-scale combustion experiment. According to the results of real-scale experiment, the maximum heat temperature of 987.7 ℃ was recorded seven minutes after the fire test was initiated while the fire-resistant aluminium panels showed the maximum heat temperature of 850.2℃ after exposed for approximately 12 min. The vertical flame spread properties put more emphasis on the time required to reach the maximum temperature rather than its magnitude and there was a five minutes difference between the materials.

模卡砌块组合保温墙体热工性能及其经济性分析

随着超低能耗建筑、近零能耗及零能耗建筑的发展,新型外墙围护结构引起广泛地研究和重视.模卡砌块作为一种新型外墙自保温技术,开始在上海、江苏等国内一些发达地区被试点和应用,但目前暂无相应规范指导,其热工性能及经济性仍缺乏系统性研究.文中以夏热冬冷地区某公共建筑为例,采用DeST能耗模拟软件,建立了传统外保温墙体、模卡砌块组合保温墙体三维分析模型,研究了膨胀聚苯板、岩棉板、聚氨酯板、挤塑聚苯板4种不同类型保温材料及6种不同厚度(30、50、70、90、110、130 mm)下模卡砌块组合保温墙体的热工性能.进一步,采用净现值法,对不同工况下的砌块组合保温墙体进行了经济性分析.研究表明:在相同外墙保温厚度下,聚氨酯板的保温效果最佳;不同保温材料厚度对应的净现值都呈现出先上升后下降的趋势,结合净现值和节能率,其最优厚度分别为70、70、40、60 mm,对应的节能率分别在达到我国建筑节能65%的标准上再降低7.08%、6.81%、5.1%、6.5%.

加气混凝土复合保温外墙板连接节点试验研究

通过对钢管锚节点、套筒节点和新型F型节点进行的6组加气混凝土板四分点加载节点极限承载力试验,分析不同板厚下3种节点的节点强度、节点刚度等性能指标。研究表明:新型F型节点力学性能良好,连接可靠,节点极限承载力随板厚增加而增大。新型F型节点可较好地适用在加气混凝土复合保温外墙板体系中。

建筑外墙砖饰面安全风险评估模型

建筑外墙砖脱落事故频发,不仅破坏了建筑外观,更是危及居民人身安全。然而砖饰面损坏因素复杂,目前缺少可量化的风险评估模型。基于影响显著、易获取、可量化原则,选取距离上一次全面维修的年限、裂缝数量和立面空鼓面积比,作为外墙砖饰面安全风险评估的量化指标。通过对74个项目进行统计分析,综合运用信息量权重法和专家打分法,确定距离上一次全面维修的年限、裂缝数量和立面空鼓面积比的权重分别为0.20,0.41,0.39。最后通过项目验证,根据提出的安全风险计算模型,当安全风险分值达到40分时,外墙砖饰面发生高坠的风险概率较大。

一种填料优化改性的建筑外墙密封胶性能研究

密封胶的质量与性能对装配式建筑外墙接缝处理具有直接影响,利用密封胶填补接缝,可以防止水分渗透,避免结构材料的破坏,从而延长建筑物的使用寿命。研究制备一种装配式建筑外墙接缝用改性密封胶,将其用于装配式建筑外墙接缝过程,为装配式建筑外墙提供加固支撑。通过进行装配式建筑伸缩缝的嵌缝处理,完成装配式建筑伸缩缝的养护后,对伸缩缝粘接性能、硬度性能、拉伸性能进行测试。实验发现,在碳酸钙填料的质量分数占比2.5%时,制备得到的改性密封胶具有最佳的力学性能和加固性能等,更适用于装配式建筑外墙接缝的实际应用。

混凝土外墙面装饰用改性环氧树脂胶粘剂制备及应用

为了提高建筑外墙装饰用混凝土胶粘剂性能。以环氧树脂为原料,以乙酸乙酯为稀释剂,以三苯基膦盐为固化剂制备了建筑外墙装饰用混凝土环氧树脂胶粘剂,并对其性能进行了测试表征。结果表明,冷环境下,随着温度降低混凝土与砖板粘接试件的粘接强度、剥离强度不断下降,冲击强度极速下降,而剪切强度变化并不显著;热环境下,随着温度升高试件的粘接强度、剪切强度、冲击强度并未显著变化,而剥离强度缓慢下降;湿环境下,随着湿度增加试件的粘接强度、剥离强度、剪切强度、剪切强度均明显下降;随着挠度增大,试件的抗压强度呈现为显著变大趋势;环氧树脂胶粘剂表观性能与环保性能表现优异,且整体承载力与抗压强度明显提高。

双层隔震梁结构关键施工技术

以北京市城市规划设计研究院新建业务综合楼为载体,针对狭窄环境下核心筒结构隔震支墩、地下结构劲性双层隔震框架梁、超高隔震沟外墙等关键施工部位,合理地进行隔震支座与主体结构的节点深化,优化隔震支座与框架结构的连接工艺措施,调整隔震沟外墙与支护结构的施工工艺,重视韧性结构关键节点的质量与安全,取得了良好的技术经济效益,值得类似项目借鉴。

外保温系统高空坠落风险的热湿渐进性微损伤研究

基于断裂相场法的数值分析,构建细观-宏观尺度的计算模型,模拟外墙表面遭受炎热暴晒后突然降温情况下内部温度场与微观应力场,建立了热湿渐进性微损伤的评价模型,并通过粘接砂浆拉拔试验进行验证。结果表明:外保温系统外表面夏季升温至88.6℃再突然遭遇冰雹及强降雨降温至20℃时,细骨料和净浆受到的最大主应力值可达15 MPa,其厚度方向5 mm深度约100μm宽的裂纹已发展贯通,表明极端气候变化对保温系统结构完整性造成了实质性损害,外保温系统高空坠落风险迅速增大。

不同气候区域下气凝胶泡沫混凝土的节能性研究

新型高性能气凝胶泡沫混凝土具有超高保温隔热性能,因其优良的防火性能、高耐久性能和低吸湿性能,目前已成为建筑保温隔热、节能减碳领域的热点研究方向之一。为探究气凝胶泡沫混凝土墙体在中国四个不同气候区下的节能性,本文通过建筑能耗模拟软件EnergyPlus,将气凝胶泡沫混凝土与传统泡沫混凝土应用于住宅建筑的外墙中,对建筑的全年、月度能耗进行对比分析。结果表明气凝胶泡沫混凝土能够节能2.1%-6%。研究结果可为气凝胶泡沫混凝土的推广与应用提供参考。

发泡水泥板的应用背景、现状及前景概述

为深层次、全面了解发泡水泥板诞生背景、应用现状和发展前景,本文对发泡水泥板应用背景、市场需求、技术标准沿变、整体性能、综合成本、应用现状、发展前景进行全方位、多角度、深层次剖析。综合认为:尽管发泡水泥板具有隔热、防火(A1级)、环保、抗老化、强度高等优点,但其研发技术壁垒低,加上劣质产品挡道、厂家恶性竞争等恶劣现象,致使其市场容纳空间已非常狭小。本文将为建筑从业人员全面了解发泡水泥板的“来龙去脉”和实时动态提供最新现实科学依据,为科研工作者研发新型建筑保温材料提供更多理论科学依据。

全预制框架结构装配式混凝土建筑复合外墙“干式”建造优化研究

目前受传统串行建筑运作模式影响,部分装配式项目依然执行“常规设计+二次拆分”,进而引起拆分的装配单元类型较多或拆分不干净现象,而在承继以上问题的同时,混凝土框架结构复合外墙出现了装配单元与结构体系之间“直接”连接的连接件暴露问题。基于此,以中国西部科技创新港科创基地7号楼(西安交通大学人居环境研究院)为例,首先对设计进行了修正,并建立了预埋龙骨的干式机械连接方式,从而使复合外墙与结构体系的干式连接得以优化与修正。

高层住宅外墙门窗安装工艺与防渗漏措施探讨

研究了高层住宅外墙门窗安装工艺与防渗漏措施,从施工准备、门窗框安装、门窗扇安装、玻璃安装、成品保护等主要环节着手,分析了门窗安装工艺技术要点,并对因设计原因、材料原因、施工原因而产生的渗漏问题进行剖析,并提出了针对性的处理措施,以提高外墙门窗防渗漏效果,更好地满足住宅使用需求。

基于航拍图像与改进U-Net的建筑外墙裂缝检测方法

针对建筑外墙裂缝人工检测方法检测效率低、检测效果和安全性差的问题,提出基于航拍图像与计算机视觉的裂缝检测方法。使用无人机绕建筑物航拍采集裂缝图像,并构建裂缝数据集;优化U-Net模型以解决细长裂缝分割不连续、复杂背景下裂缝漏检及背景误检的问题。将模型编码网络替换为预训练的ResNet50以提升模型特征表达能力;添加改进的多孔空间金字塔池化(Atrous Spatial Pyramid Pooling,ASPP)模块,获取多尺度上下文信息;采用改进的损失函数处理裂缝图像正负样本分布极度不均的问题。结果表明:改进的U-Net模型解决了原模型存在的问题,IoU指标和F1_score分别提升了3.53%、4.18%;与经典分割模型相比,改进模型的裂缝分割性能最优。与人工检测方法相比,所提方法可以安全、高效且准确地进行建筑外墙裂缝检测。

地下室外墙新型工具式单侧支模体系设计及应用

通过对建筑工程地下室支模体系历史沿革进行研究,分析总结常用单侧支模体系优缺点;围绕快速装拆、提高材料复用率、减少现场吊运量、增强结构防水质量等关键指标,进行新型工具式单侧模板创新优化设计。利用ETABS软件进行模板力学分析,采用现场试验进行变形及应力测定及验证。基于分析及试验结果,进行迭代优化,由此形成新型工具式单侧支模体系。工程应用效果表明,该体系较传统单侧支模体系在技术、经济方面均有大幅提升,为未来地下室外墙支模问题提供了解决方案。

建筑外墙保温板接缝专用改性聚醚密封胶制备及特性研究

为提升建筑外墙保温板的使用寿命,制备装配式建筑外墙保温板接缝用改性聚醚密封胶,并通过试验分析该密封胶性能。以封端硅烷偶联剂和异腈酸酯基硅烷作为改性剂,聚醚元醇作为基料制备改性聚醚密封胶,应用在装配式建筑外墙保温板接缝中。依据标准测试该密封胶的表观性能,研究养护时间、紫外光照对该密封胶的粘接强度影响,分析催化剂和填料用量对于该密封胶表观性能与拉伸性能影响。试验结果表明,该密封胶表观性能符合标准,养护7 d后粘接性能基本稳定,催化剂用量20%,填料用料30%时表观性与拉伸性能最好。