Multi-phase nitrides bonded silicon carbide lintel blocks were prepared using industrial SiC(SiC≥98 mass%,3-0.5,≤0.5 and≤0.044 mm),Si powder(Si≥98 mass%,≤0.044 mm),and SiO2 micropowder(SiO2≥96 mass%,d50=0.15 pm)...Multi-phase nitrides bonded silicon carbide lintel blocks were prepared using industrial SiC(SiC≥98 mass%,3-0.5,≤0.5 and≤0.044 mm),Si powder(Si≥98 mass%,≤0.044 mm),and SiO2 micropowder(SiO2≥96 mass%,d50=0.15 pm)as raw materials,and calcium lignosulfonate as the additive,batching,mixing,and molding on a vibration pressure molding machine,drying and then firing at 1420℃for 10 h in high-purity N2.The apparent porosity,the bulk density,the cold modulus of rupture,the hot modulus of rupture,and the linear expansion coefficient of the samples were tested.The phase composition and the microstructure of the samples at different nitriding depths(50,100,and 150 mm)were analyzed by XRD and SEM.The field application effects of the blocks were studied.The results show that:(1)the multi-phase nitrides bonded silicon carbide refractories can dynamically adjust their own phase composition and minimize structural and thermal stresses,improving the service life of key parts of dry quenching furnaces;(2)calcium lignosulfonate can improve the nitriding micro-environment of multi-phase nitrides bonded silicon carbide lintel blocks,successfully increasing the effective nitriding thickness of the blocks to 300 mm;(3)Sinosteel LI RR provides a unique concept in the design of materials and block types as well as the stable and scientific overall structure,promoting the industrialization process of dry quenching furnaces with long service life in China.展开更多
This paper reports the chemical synthesis of tungsten carbide/cobalt (WC/Co) nanocomposite powders via a unique chemical processing technique, involving the using of all water soluble solution of W-, Co- and C-precurs...This paper reports the chemical synthesis of tungsten carbide/cobalt (WC/Co) nanocomposite powders via a unique chemical processing technique, involving the using of all water soluble solution of W-, Co- and C-precursors. In the actual synthesis, large quantities of commercial-scale WC-Co nanocomposite powders are made by an unique combination of converting a molecularly mixed W-, Co-, and C-containing solutions into a complex inorganic polymeric powder precursor, conversion of the inorganic polymeric precursor powder into a W-Co-C-O containing powder intermediates using a belt furnace with temperature at about 500°C - 600°C in an inert atmosphere, followed by carburization in a rotary furnace at temperature less than 1000°C in nitrogen. Liquid phase sintering technique is used to consolidate the WC/Co nanocomposite powder into sintered bulk parts. The sintered parts have excellent hardness in excess of 93 HRA, with WC grains in the order of 200 - 300 nm, while Co phase is uniformly distributed on the grain boundaries of the WC nanoparticles. We also report the presence of cobalt Co precipitates inside tungsten carbide WC nanograins in the composites of the consolidated bulk parts. EDS is used to identify the presence of these precipitates and micro-micro-diffraction technique is employed to determine the nature of these precipitates.展开更多
CaO-containing carbon pellets(CCCP)were successfully prepared from well-mixed coking coal(CC)and calcium oxide(CaO)and roasted at different pyrolysis temperatures.The effects of temperature,pore distribution,and carbo...CaO-containing carbon pellets(CCCP)were successfully prepared from well-mixed coking coal(CC)and calcium oxide(CaO)and roasted at different pyrolysis temperatures.The effects of temperature,pore distribution,and carbon structure on the compressive strength of CCCP was investigated in a pyrolysis furnace(350-750℃).The results showed that as the roasting temperature increased,the compressive strength also increased and furthermore,structural defects and imperfections in the carbon crystallites were gradually eliminated to form more organized char structures,thus forming high-ordered CC.Notably,the CCCP preheated at 750℃exhibited the highest compressive strength.A positive relationship between the compressive strength and pore-size homogeneity was established.A linear relationship between the com-pressive strength of the CCCP and the average stack height of CC was observed.Additionally,a four-stage caking mechanism was developed.展开更多
Al_(2)O_(3)-SiC castables,for the relining of BF hearths in mid-campaign repair,were sampled and investigated after two years’service.The chemical and mineralogical characteristics of the residual castables were anal...Al_(2)O_(3)-SiC castables,for the relining of BF hearths in mid-campaign repair,were sampled and investigated after two years’service.The chemical and mineralogical characteristics of the residual castables were analyzed by X-ray diffraction,scanning electron microscopy,and energy dispersive X-ray spectrometry to study the erosion mechanism.The results show that as gaseous K diffuses in the castables,leucite(KAlSi_(2)O_(8))and multiple cracks are formed.Molten iron and slag penetrate through the cracks to form anorthite([Ca,Na][Al,Si]_(4)O_(8))and iron,which will not form an embrittlement layer similar to carbon bricks.The entire repair of the hearth with Al_(2)O_(3)-SiC castables combined with the design of thin-wall lining hearth eliminates“elephant foot shaped”erosion,greatly prolonging the service life of the hearth lining.展开更多
A SiC assembled large block for blast furnace tuyeres was prepared using silicon carbide particles(3-1 and 1-0.088 mm)and fine powder(<0.088 mm),silicon powder(<0.088 mm),industrial carbon black(N990),microsili...A SiC assembled large block for blast furnace tuyeres was prepared using silicon carbide particles(3-1 and 1-0.088 mm)and fine powder(<0.088 mm),silicon powder(<0.088 mm),industrial carbon black(N990),microsilica,ρ-Al_(2)O_(3) powder,etc.as raw materials.The developed block was compared with a silicon nitride bonded silicon carbide brick,a self-bonded silicon carbide brick and an imported self-bonded silicon carbide block to analyze and evaluate their service performance.The results show that:(1)in the 0-100 mm zone,the SiC large block mainly consists ofβ-SiC and nitrides such as O'-SiAlON,β-SiAlON,α-Si_(3)N_(4),and Si_(2)N_(2)O,the bulk density is 2.68-2.70 g·cm^(-3),the apparent porosity is 14%-15%,and the material structure is uniform;(2)in the 0-100 mm zone,β-SiC nano-whiskers intercalate with nitrides;with the depth increasing,the number of flocculentβ-SiC nano-whiskers increases,while the number of nitrides decreases;when the depth reaches 150 mm or more,the main bonding phases areβ-SiC and mullite;(3)compared with the reference products,the developed SiC large block has a good basic performance,and after alkali corrosion,the mass change rate is-0.1%,which is obviously superior to the imported self-bonded silicon carbide and the homemade silicon nitride bonded silicon carbide materials.展开更多
文摘Multi-phase nitrides bonded silicon carbide lintel blocks were prepared using industrial SiC(SiC≥98 mass%,3-0.5,≤0.5 and≤0.044 mm),Si powder(Si≥98 mass%,≤0.044 mm),and SiO2 micropowder(SiO2≥96 mass%,d50=0.15 pm)as raw materials,and calcium lignosulfonate as the additive,batching,mixing,and molding on a vibration pressure molding machine,drying and then firing at 1420℃for 10 h in high-purity N2.The apparent porosity,the bulk density,the cold modulus of rupture,the hot modulus of rupture,and the linear expansion coefficient of the samples were tested.The phase composition and the microstructure of the samples at different nitriding depths(50,100,and 150 mm)were analyzed by XRD and SEM.The field application effects of the blocks were studied.The results show that:(1)the multi-phase nitrides bonded silicon carbide refractories can dynamically adjust their own phase composition and minimize structural and thermal stresses,improving the service life of key parts of dry quenching furnaces;(2)calcium lignosulfonate can improve the nitriding micro-environment of multi-phase nitrides bonded silicon carbide lintel blocks,successfully increasing the effective nitriding thickness of the blocks to 300 mm;(3)Sinosteel LI RR provides a unique concept in the design of materials and block types as well as the stable and scientific overall structure,promoting the industrialization process of dry quenching furnaces with long service life in China.
文摘This paper reports the chemical synthesis of tungsten carbide/cobalt (WC/Co) nanocomposite powders via a unique chemical processing technique, involving the using of all water soluble solution of W-, Co- and C-precursors. In the actual synthesis, large quantities of commercial-scale WC-Co nanocomposite powders are made by an unique combination of converting a molecularly mixed W-, Co-, and C-containing solutions into a complex inorganic polymeric powder precursor, conversion of the inorganic polymeric precursor powder into a W-Co-C-O containing powder intermediates using a belt furnace with temperature at about 500°C - 600°C in an inert atmosphere, followed by carburization in a rotary furnace at temperature less than 1000°C in nitrogen. Liquid phase sintering technique is used to consolidate the WC/Co nanocomposite powder into sintered bulk parts. The sintered parts have excellent hardness in excess of 93 HRA, with WC grains in the order of 200 - 300 nm, while Co phase is uniformly distributed on the grain boundaries of the WC nanoparticles. We also report the presence of cobalt Co precipitates inside tungsten carbide WC nanograins in the composites of the consolidated bulk parts. EDS is used to identify the presence of these precipitates and micro-micro-diffraction technique is employed to determine the nature of these precipitates.
基金This work was financially supported by the National Key R&D Program of China(No.2018YFB0605900).
文摘CaO-containing carbon pellets(CCCP)were successfully prepared from well-mixed coking coal(CC)and calcium oxide(CaO)and roasted at different pyrolysis temperatures.The effects of temperature,pore distribution,and carbon structure on the compressive strength of CCCP was investigated in a pyrolysis furnace(350-750℃).The results showed that as the roasting temperature increased,the compressive strength also increased and furthermore,structural defects and imperfections in the carbon crystallites were gradually eliminated to form more organized char structures,thus forming high-ordered CC.Notably,the CCCP preheated at 750℃exhibited the highest compressive strength.A positive relationship between the compressive strength and pore-size homogeneity was established.A linear relationship between the com-pressive strength of the CCCP and the average stack height of CC was observed.Additionally,a four-stage caking mechanism was developed.
文摘Al_(2)O_(3)-SiC castables,for the relining of BF hearths in mid-campaign repair,were sampled and investigated after two years’service.The chemical and mineralogical characteristics of the residual castables were analyzed by X-ray diffraction,scanning electron microscopy,and energy dispersive X-ray spectrometry to study the erosion mechanism.The results show that as gaseous K diffuses in the castables,leucite(KAlSi_(2)O_(8))and multiple cracks are formed.Molten iron and slag penetrate through the cracks to form anorthite([Ca,Na][Al,Si]_(4)O_(8))and iron,which will not form an embrittlement layer similar to carbon bricks.The entire repair of the hearth with Al_(2)O_(3)-SiC castables combined with the design of thin-wall lining hearth eliminates“elephant foot shaped”erosion,greatly prolonging the service life of the hearth lining.
文摘A SiC assembled large block for blast furnace tuyeres was prepared using silicon carbide particles(3-1 and 1-0.088 mm)and fine powder(<0.088 mm),silicon powder(<0.088 mm),industrial carbon black(N990),microsilica,ρ-Al_(2)O_(3) powder,etc.as raw materials.The developed block was compared with a silicon nitride bonded silicon carbide brick,a self-bonded silicon carbide brick and an imported self-bonded silicon carbide block to analyze and evaluate their service performance.The results show that:(1)in the 0-100 mm zone,the SiC large block mainly consists ofβ-SiC and nitrides such as O'-SiAlON,β-SiAlON,α-Si_(3)N_(4),and Si_(2)N_(2)O,the bulk density is 2.68-2.70 g·cm^(-3),the apparent porosity is 14%-15%,and the material structure is uniform;(2)in the 0-100 mm zone,β-SiC nano-whiskers intercalate with nitrides;with the depth increasing,the number of flocculentβ-SiC nano-whiskers increases,while the number of nitrides decreases;when the depth reaches 150 mm or more,the main bonding phases areβ-SiC and mullite;(3)compared with the reference products,the developed SiC large block has a good basic performance,and after alkali corrosion,the mass change rate is-0.1%,which is obviously superior to the imported self-bonded silicon carbide and the homemade silicon nitride bonded silicon carbide materials.
