纺织工程专业本科机织学课程“WEAVE”教学模式创新与实践

为了落实立德树人根本任务,以为国家和社会培养支撑纺织产业转型升级的复合人才为根本目标,结合课程特点、学情分析和教师角色,对纺织工程专业本科机织学课程进行了教学创新探索与实践。坚持以学生学习为中心,建设“WEAVE”教学模式。在“WEAVE”教学模式中,在教学内容、教学方法、教学评价体系方面,注重强调学生在学习中的主体地位,明确教师在学习过程中的辅助作用,引导学生高度参与课堂教学,加深学生对学习目标和学习成果的清晰认知,更好地培养学生的学习能力。“WEAVE”教学模式具有明显的纺织特色,在培养纺织行业人才方面具有一定的优势。

Analysis on the turning point of dynamic in-plane compressive strength for a plain weave composite

Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate of composites was established. Then the upper limit of strain rate, restricted by stress equilibrium and constant loading rate, was rationally estimated and confirmed by tests. Within the achievable range of 0.001/s-895/s, it was found that the strength increased first and subsequently decreased as the strain rate increased. This feature was also reflected by the turning point(579/s) of the bilinear model for strength prediction. The transition in failure mechanism, from local opening damage to completely splitting destruction, was mainly responsible for such strain rate effects. And three major failure modes were summarized under microscopic observations: fiber fracture, inter-fiber fracture, and interface delamination. Finally, by introducing a nonlinear damage variable, a simplified ZWT model was developed to characterize the dynamic mechanical response. Excellent agreement was shown between the experimental and simulated results.

The Impact of Fabric Weave and Anisotropy on the Poisson’s Ratio in Technical Fabrics

Poisson’s ratio changes during the tensile stress of technical fabric samples due to the anisotropy of technical fabrics.This paper examines the effects of the type of weave and the anisotropic characteristics of the technical fabric on maximum tensile force,corresponding elongation,work-to-maximum force,elasticity modulus,and Poisson’s ratio when axial tensile forces are applied to samples cut at various angles in the direction of the weft yarns of the technical fabric.In the lab,3 cotton fabric samples of constant warp and weft density with different structural weave types(plain weave,twill weave,atlas weave)were subjected to the tensile force until they broke at the following angles:0°,15°,30°,45°,60°,75°,90°.Based on the different measured values of technical fabric stretching in the longitudinal direction and lateral narrowing,Poisson’s ratio is calculated.The Poisson’s ratio was calculated up to a relative elongation of the fabric of 8%,as the buckling of the fabric occurs according to this elongation value.According to the results presented in this paper,the type of weave of the fabric,the direction of tensile force,and the relative narrowing of the technical fabrics all play important roles in the Poisson’s ratio value.The Poisson’s ratio curve of a technical fabric under tensile stress(i.e.elongation)is primarily determined by its behaviour in the opposite direction of the elongation.The change in the value of the Poisson’s ratio is represented by a graph that first increases nonlinearly and then decreases after reaching its maximum value.

Influence of Weave Structures on the Tribological Properties of Hybrid Kevlar/PTFE Fabric Composites

The existing research of the woven fabric self-lubricating liner mainly focus on the tribological performance improvements and the service life raised by changing different fiber type combinations, adding additive modification, and performing fiber surface modification. As fabric composites, the weave structures play an important role in the mechanical and tribological performances of the liners. However, hardly any literature is available on the friction and wear behavior of such composites with different weave structures. In this paper, three weave structures （plain, twill 1/3 and satin 8/5） of hybrid Kevlar/PTFE fabric composites are selected and pin-on-flat linear reciprocating wear studies are done on a CETR tester under different pressures and different frequencies. The relationship between the tensile strength and the wear performance are studied. The morphologies of the worn surfaces under the typical test conditions are analyzed by means of scanning electron microscopy （SEM）. The analysis results show that at 10 MPa, satin 8/5 performs the best in friction-reduction and antiwear performance, and plain is the worst. At 30 MPa, however, the antiwear performance is reversed and satin 8/5 does not even complete the 2 h wear test at 16 Hz. There is no clear evidence proving that the tensile strength has an influence on the wear performance. So the different tribological performance of the three weave structures of fabric composites may be attributed to the different PTFE proportions in the fabric surface and the different wear mechanisms. The fabric composites are divided into three regions： the lubrication region, the reinforced region and the bonding region. The major mechanisms are fatigue wear and the shear effects of the friction force in the lubrication region. In the reinforced region fiber-matrix de-bonding and fiber breakage are involved. The proposed research proposes a regional wear model and further indicates the wear process and the wear mechanism of fabric composites.

CAD Method to Design Complex Dobby Weaves with Large Repeats

The principle of a CAD method of converting the pre-designed figures in image form into complex dobby weaves with the appearances similar to the original figures is mainly introduced in this paper. A few designed weaves by the created CAD system are also given as examples of the practical application in the area of complex dobby weave designing.

Quantitative research on the heat affected zone of weave bead welding for Invar alloy

Quantitative research on the heat affected zone （ HAZ） o f weave bead welding （ WBW） joint fo r Invar alloy is carried out in this paper. Based on the morphology and related data analysis of the weld seam, the width difference o f each layer and the forming mechanism are analyzed. Results show that the bottom layer （ Layer 1 ） has the widest HAZ and the smallest fluctuation, which reaches 1 200 ｜jLm. HAZ width o f layer 2 to 5 is relatively narrower which is basically below 600 jjim, while the amplitude fluctuation is greater. The main reason lies in the welding path. The long straight welding without weave causes the base metal near the groove fully melts which causes by the long straight welding without weave, while welding with weave leads to the uneven and inadequate melting of metal near groove.

A Method of Computer Simulation for Derivative Weave and Composed Weave

In this paper, we investigate the method of computer simulation for derivative weave by adopting the way of weave differentiation with mathematical function. And on that base, we explore the way for dealing with composed weave. It is purposed for building a simple and efficient way of computer simulation for weave.

Development of Sichuan Brocade with Imitating Embroidery Effect Based on Free-Floats Interlacing Weave

Owing to the diversity of consumer’s demand, the traditional Sichuan brocade products have to be innovated in order to survive in a competitive environment. Since the construction of traditional Sichuan brocade was composed of basic-weave, the surface of the fabric shows a regular interweaving planar texture and is difficult to represent a three-dimensional effect. Inspired by embroidery handcraft, this paper attempts to achieve the embroidery-like effect on the fabric through the jacquard process. Based on the multi-backed structure of traditional Sichuan brocade, we adopted the zoned-combination design mode and added extra free-floats interlacing weave in the area where we want to show the embroidered effect and arranged the interlacing points by referring to the feature of the pattern. As a result, designed Sichuan brocades by this method are capable of displaying embroidered effect with high realism and three-dimensionality. This approach improves the artistic effect of the traditional Sichuan brocade and provides a technical reference for further texture design of jacquard fabrics.

Method of Weave Design Using the Concept of Auxiliary Dobby Shaft

The craft of auxiliary dobby shaft is one of methods used in the traditional figured woven textiles and especially brocade in China.Based on the principle of auxiliary dobby shaft,a new method of weave design was proposed.The relevant arrangement of warp and weave design were discussed.It is shown that this method can be applied on one electronic jacquard loom with single warp beam for new product development and production.And this effect will open up a new way to reproduce traditional fabrics in order to protect and develop Chinese traditional culture.

3D Woven Structures and Their Weave Design with Changing Cross-section on Warp and Weft Direction

With 3D orthogonal and pseudo-orthogonal weaves, woven sructures with lengthwise and widthwise changing cross section on one side or both sides of the structure can be constructed. The weave formation and the looming draft creation are discussed in this paper which can be used as references to manufacture woven preforms with changing cross sections.

Influence of Weave on Fabric Wrinkle Recovery Property before and after Resin Treatment

Cotton fabrics with different weaves are designed and the influence of weave on wrinkle recovery property and tensile property is analyzed. Weave type plays a prominent part in determining fabric wrinkle recovery property and tensile property. Weave factor C is in direct relation to wrinkle recovery angle and in inverse relation to tensile property. This trend also exists after resin treatment. 3/1 left-twill fabric shows good wrinkle recovery angle and lest tensile loss after resin treatment.

STUDY ON THE MATHEMATICAL MODEL FOR FABRIC WEAVE DESIGN AND ITS APPLICATIONS

In the light of the mapping between[0,1]matrixes of fab-ric weaves,we establish in this paper a mathematical modelfor fabric weave design- One type of non- associative al-gebra composed of 7 basic transformations in a 2- elementfield.In view of practice,we expand the generative set ofmapping of this matematical model to cover the generaltransformation methods in traditional weave design.Takingthe algorethm of" Kronecker product" as an example,wefurthermore illustrate applied potentialities of the generativeset of mapping in the CAD of fabic weaves.

Lei Zu and Can Cong Weaved the Splendid Brocade and the Belt and Road Is Writing a Brilliant Chapter——The Chengdu Consensus of the Academic Seminar on the Land of Abundance and the Silk Road

'Dawn sees saturated reds;the town’s heavy with blooms.'We,more than 90 experts and scholars from home and abroad,attended The Academic Seminar on the Land of Abundance and the Silk Road held by the Association of Chinese Historians,the Guangming Daily Press,the Society for Chinese Archaeology,the Chinese Society on Ancient Capitals,the School of Archaeology and Museology of Peking University,and Sichuan Academy of

Non-woven Industry Weaves a Beautiful Pattern

As one of the three backbone con- sumptions (apparel, home-textile, tech- textile or industrial applications), non- woven textile industry performed well in 2005, but problems still remain. An official from the State Development and Reform Commission - China’s top planner, mapped out economic blue- prints for this fast-growing sector in 2006.

TMAS is ready to weave success and growth in Vietnam

TMAS,Textile Machinery Association of Sweden,has established a local office in the 7th district of Ho Chi Minh City.Heading the office is Mr.Tran Phuoc Thanh,Business Development Representative for TMAS in Vietnam.Mr.Tran comes with experience from the

基于OBE理念的《交通运输规划》课程思政建设与实践——以西安建筑科技大学土木工程学院为例

以全面育人为根本出发点,结合西安建筑科技大学交通运输专业工程教育专业认证实际,将交通运输行业发展与国家历史发展进程紧密融合,坚持价值导向与知识传授过程有机融合,坚持个人能力发展与国家战略发展有机融合,将社会主义道路自信、家国情怀、社会担当、知识创新、以人为本等思政教育目标与交通运输发展历程、规划理念、未来需求等理论知识相融合。通过课程思政总体架构搭建、思政元素挖掘与编织、构建思政元素智慧树,切实有效地将“课程思政”的教学目标融入交通运输规划系统设计全过程,培养学生跨学科综合思维能力,引领学生从历史、现在和未来纵深角度思考国家的道路选择、自身的社会责任,努力造就具有家国情怀和历史担当的交通运输行业复合型人才。

数字乡村建设中非遗文化助力农村产业发展路径研究——以阜南县H镇柳编为例

在新一轮科技革命和产业变革的大背景下,数字经济在各个产业当中广泛渗透、深度融合,已然成为推动乡村振兴、重塑乡村经济结构的重要力量,同时其依托的数字技术也为柳编产业的转型升级和创新发展给予了有力支撑。以阜南县H镇非遗产业柳编为着眼点,研究发现非遗文化在助力乡村产业发展时存有如下短板:柳编传承面临困境、企业运行受到限制以及政策与环境的约束。为切实弥补现存短板,应当充分借助数字技术的优势,多措并施加强柳编文化传承;激发企业运行活力,提高企业创新能力;筑牢政策支持基础,优化发展环境,从而推动非遗文化有效助力农村产业发展。

小花楼织机织造技艺数字化教育设计研究

目的为了缓解小花楼织机织造技艺面临失传的问题,根据ARCS动机理论展开织造技艺数字化教育的设计研究,提升学习者在体验过程中的注意力和理解力,增强其掌握织造技艺的自信和满足感。方法结合ARCS动机理论和小花楼织机的织造技艺知识点,将数字化教育划分为三个教育单元,即小花楼织机的交互及展示设计、小花楼织机结构的模块化设计、实物模型控制及模拟设计,并在Unity平台中展开Arduino开发板以集成设计,由浅入深地构建数字化教育场景。结论对照实验结果表明,基于ARCS动机理论的数字化教育方式具有可行性和实践性,小花楼织机织造技艺的知识可达性和教育互动性有了显著提高,为蜀锦织造技艺的传承和发展提供了一定的参考价值和实践意义。

用户需求视角下湘西竹编纹样在家具设计中的应用

为探索湘西竹编纹样在家具设计中的传承应用,使其满足当代用户的需求,以圈椅为例进行剖析。首先通过调研和搜集资料构建圈椅样本库及湘西竹编元素库;其次通过问卷调查、文献检索和目标用户访谈法获取用户需求,利用熵权TOPSIS模型对用户需求进行整合,AHP计算用户需求的权重,以此为依据从圈椅样本库和湘西竹编元素库中确定初始形状;并通过形状文法的造型推演规则对各设计要素进行草图方案推演;最后基于灰色关联分析法得到方案评判关联度,确定最佳方案。结果表明,通过设计实践验证了使用AHP-熵权TOPSIS得到的用户需求较为准确,用形状文法将湘西竹编纹样运用在家具设计中的可行性。该设计方法的运用使竹编文化在家具设计中得到传承的同时,也能满足用户的需求,既提升了家具产品的文化内涵与美学价值,也为“以竹代塑”在家具行业的推行提供借鉴。

基于分形图案的透孔织物的设计和开发

为了丰富花式透孔织物的花纹种类,利用平纹和透孔组织的特点,采用分形图案设计,将平纹和简单透孔组织结合,形成有规律的花式透孔组织图案,以谢尔宾斯基地毯图案作为花式透孔组织的分形图案纹样,进行花式透孔织物的组织设计、上机设计及工艺参数设计等,并进行试织。结果得出:采用谢尔宾斯基地毯图案作为分形图案进行纹样设计,使平纹和透孔组织形成的花式透孔组织图案更有规律性,同时纹样新颖,具有装饰性,分形图案的使用也为多组织组合形成多种类的透孔花纹图案提供了新思路。