The accurate monitoring of optical thin-film thickness is a key technique for depositing optical thin-film. For existing coating equipments, which are low precision and automation level on monitoring thin-film thickne...The accurate monitoring of optical thin-film thickness is a key technique for depositing optical thin-film. For existing coating equipments, which are low precision and automation level on monitoring thin-film thickness, a new photoelectric control and analysis system has been developed. In the new system, main techniques include a photoelectric system with dual-light path, a dual-lock-phase circuit system and a comprehensive digital processing-control-analysis system.The test results of new system show that the static and dynamic stabilities and the control precision of thin-film thickness are extremely increased. The standard deviation of thin-film thickness, which indicates the duplication of thin-film thickness monitoring, is equal to or less than 0.72%. The display resolution limit on reflectivity is 0.02 %. In the system, the linearity of drift is very high, and the static drift ratio approaches zero.展开更多
A new novel function materials, structure self-monitoring asphalt-based composite was introduced. The results show that the output resistance of electrically conductive asphalt-based composites would change under cycl...A new novel function materials, structure self-monitoring asphalt-based composite was introduced. The results show that the output resistance of electrically conductive asphalt-based composites would change under cyclic loading and vehicle loading action. The resistance change of conductive asphalt-based composites was aroused by the variation of its interior structure. When the fatigue failure was studied, the larger cracks cut the continuous electrically conductive path and the electron is difficult to overcome the potential barrier of gap. In the early period, the slight deformation and microcrack may be recovered due to the viscoelasticity character of asphalt, which leads to some cracks close again, the output resistance changes a little. But with the shear process performs continuously, the cracks become larger and larger, which would cut the conductive path and block off the transition of electrons, and if the cracks are large enough, the pitch-matrix composites containing carbon fillers will lose electrically conductive function. When the rutting failure was studied, the flowage of conductive substance results in the decrease of substance due to electrically conducting and conductive path decreasing. The decrease of electron volume contribute to electrically conducting and large stone aggregate prevent the electron from transiting. In a word, the variation of output resistance is aroused by the variation of interior structure completely.展开更多
Monitoring the performance of any structure requires real-time measurements of the change of position of critical points. Different techniques can be used for this purpose, each one offering advantages and disadvantag...Monitoring the performance of any structure requires real-time measurements of the change of position of critical points. Different techniques can be used for this purpose, each one offering advantages and disadvantages. The technique based on satellite positioning systems (GPS, GLONASS and the future GALILEO) seems to be very promising at least for long period structures. The GPS in particular provides sampling rates that are able to track dynamic displacements with high accuracy. Its service ability is independent of atmospheric conditions, temperature variations and visibility of the monitored object. This paper investigates the reliability and accuracy of the measurements of dual frequency GPS receivers. A linear electromagnetic motor moves an object along a given direction. The changes of position are compared witb their estimates as recorded by a GPS receiver, whose antenna is located on the reference object. The comparison is based on sufficiently long records.展开更多
In light of demands for wireless monitoring and the characteristics of wireless channel,a complete deployment method containing channel survey,path loss estimation,and gradient grade of wireless relay nodes is propose...In light of demands for wireless monitoring and the characteristics of wireless channel,a complete deployment method containing channel survey,path loss estimation,and gradient grade of wireless relay nodes is proposed.It can be proved by experiments that under the premise of meeting the requirements of real-time and redundant-topology,the total number of relay nodes could be minimized by using the proposed method.展开更多
基金Sponsored by the Ordnance Industry Scientific Research Fund(ZZ9682-3).
文摘The accurate monitoring of optical thin-film thickness is a key technique for depositing optical thin-film. For existing coating equipments, which are low precision and automation level on monitoring thin-film thickness, a new photoelectric control and analysis system has been developed. In the new system, main techniques include a photoelectric system with dual-light path, a dual-lock-phase circuit system and a comprehensive digital processing-control-analysis system.The test results of new system show that the static and dynamic stabilities and the control precision of thin-film thickness are extremely increased. The standard deviation of thin-film thickness, which indicates the duplication of thin-film thickness monitoring, is equal to or less than 0.72%. The display resolution limit on reflectivity is 0.02 %. In the system, the linearity of drift is very high, and the static drift ratio approaches zero.
基金Project (2004ABB019) supported by the Outstanding Youth Foundation of Hubei Province, China project (NCET-05-0656) supported by the New Century Excellent Talents in Wuhan University
文摘A new novel function materials, structure self-monitoring asphalt-based composite was introduced. The results show that the output resistance of electrically conductive asphalt-based composites would change under cyclic loading and vehicle loading action. The resistance change of conductive asphalt-based composites was aroused by the variation of its interior structure. When the fatigue failure was studied, the larger cracks cut the continuous electrically conductive path and the electron is difficult to overcome the potential barrier of gap. In the early period, the slight deformation and microcrack may be recovered due to the viscoelasticity character of asphalt, which leads to some cracks close again, the output resistance changes a little. But with the shear process performs continuously, the cracks become larger and larger, which would cut the conductive path and block off the transition of electrons, and if the cracks are large enough, the pitch-matrix composites containing carbon fillers will lose electrically conductive function. When the rutting failure was studied, the flowage of conductive substance results in the decrease of substance due to electrically conducting and conductive path decreasing. The decrease of electron volume contribute to electrically conducting and large stone aggregate prevent the electron from transiting. In a word, the variation of output resistance is aroused by the variation of interior structure completely.
文摘Monitoring the performance of any structure requires real-time measurements of the change of position of critical points. Different techniques can be used for this purpose, each one offering advantages and disadvantages. The technique based on satellite positioning systems (GPS, GLONASS and the future GALILEO) seems to be very promising at least for long period structures. The GPS in particular provides sampling rates that are able to track dynamic displacements with high accuracy. Its service ability is independent of atmospheric conditions, temperature variations and visibility of the monitored object. This paper investigates the reliability and accuracy of the measurements of dual frequency GPS receivers. A linear electromagnetic motor moves an object along a given direction. The changes of position are compared witb their estimates as recorded by a GPS receiver, whose antenna is located on the reference object. The comparison is based on sufficiently long records.
基金provided by the Natinal Basic Research Program of China(No.2012CB026000)
文摘In light of demands for wireless monitoring and the characteristics of wireless channel,a complete deployment method containing channel survey,path loss estimation,and gradient grade of wireless relay nodes is proposed.It can be proved by experiments that under the premise of meeting the requirements of real-time and redundant-topology,the total number of relay nodes could be minimized by using the proposed method.
文摘集成门极换流晶闸管(integrated gate commutated thyristor,IGCT)换流路径杂散阻抗是评估其关断能力的重要参数,现有离线测量方法有诸多缺陷并且测试过程复杂,实时性差。该文主要针对IGCT换流路径杂散阻抗在线监测问题,结合IGCT关断过程,分析了换流路径杂散阻抗的构成;根据基尔霍夫电流定律(Kirchhoff’s current law,KCL)、基尔霍夫电压定律(Kirchhoff’s voltage law,KVL)推导了换流路径电压、电流方程,进而提出基于阴极集成印刷电路板(printed circuit board,PCB)式电流传感器的换流路径杂散参数在线监测方法;采用高速采集卡和LabVIEW软件,构建了测量系统;通过在高压、大电流加速老化测试平台上的实际测试,实现了mΩ级电阻与nH级电感的杂散阻抗准确提取,验证了在线监测方法的有效性。