A rearrangeable nonblocking thermo-optic 4×4 switching matrix,which consists of five 2×2 multimode interference-based Mach-Zehnder interferometer(MMI-MZI) switch elements,is designed and fabricated.The minim...A rearrangeable nonblocking thermo-optic 4×4 switching matrix,which consists of five 2×2 multimode interference-based Mach-Zehnder interferometer(MMI-MZI) switch elements,is designed and fabricated.The minimum and maximum excess loss for the matrix are 6.6 and 10.4dB,respectively.The crosstalk in the matrix is measured to be between -12 and -19.8dB.The switching speed of the matrix is less than 30μs.The power consumption for the single switch element is about 330mW.展开更多
In this paper, we address the stabilization problem for linear periodically time-varying switched systems. Using discretization technique, we derive new conditions for the global stabilizability in terms of the soluti...In this paper, we address the stabilization problem for linear periodically time-varying switched systems. Using discretization technique, we derive new conditions for the global stabilizability in terms of the solution of matrix inequalities. An algorithm for finding stabilizing controller and switching strategy is presented.展开更多
The first path-independent insertion-loss（PILOSS） strictly non-blocking 4×4 silicon electro–optic switch matrix is reported. The footprint of this switch matrix is only 4.6 mm×1.0 mm. Using single-arm mod...The first path-independent insertion-loss（PILOSS） strictly non-blocking 4×4 silicon electro–optic switch matrix is reported. The footprint of this switch matrix is only 4.6 mm×1.0 mm. Using single-arm modulation, the crosstalk measured in this test is-13 dB --27 dB. And a maximum crosstalk deterioration of 6d B caused by two-path interference is also found.展开更多
Quantum dot cellular automata(QCA)technology is emerging as a future technology which designs the digital circuits at quantum levels.The tech-nology has gained popularity in terms of designing digital circuits,which o...Quantum dot cellular automata(QCA)technology is emerging as a future technology which designs the digital circuits at quantum levels.The tech-nology has gained popularity in terms of designing digital circuits,which occupy very less area and less power dissipation in comparison to the present comple-mentary metal oxide semiconductor(CMOS)technology.For designing the rou-ters at quantum levels with non-blocking capabilities various multi-stage networks have been proposed.This manuscript presents the design of the N×NClos switch matrix as a multistage interconnecting network using quantum-dot cellular automata technology.The design of the Clos switch matrix presented in the article uses three input majority gates(MG).To design the 4×4 Clos switch matrix,a basic 2×2 switch architecture has been proposed as a basic mod-ule.The 2×2 switching matrix(SM)design presented in the manuscript utilizes three input majority gates.Also,the 2×2 SM has been proposed usingfive input majority gates.Two different approaches(1&2)have been presented for designing 2×2 SM usingfive input majority gates.The 2×2 SM design based on three input majority gate utilizes four zone clocking scheme to allow signal transmis-sion.Although,the clocking scheme used in 2×2 SM using three input MG and in 2×2 SM approach 1 usingfive input MG is conventional.The 2×2 SM approach 2 design,utilizes the clocking scheme in which clocks can be applied by electricfield generators easily and in turn the switch element becomes physically realizable.The simulation results conclude that the 2×2 SM is suitable for designing a 4×4 Clos network.A higher order of input-output switching matrix,supporting more number of users can utilize the proposed designs.展开更多
Based on the output-voltage error function, a novel time discrete modulation technique is proposed for matrix converters （MCs） and time-discrete difference equations of a MC circuit are derived. Switch states of MC ...Based on the output-voltage error function, a novel time discrete modulation technique is proposed for matrix converters （MCs） and time-discrete difference equations of a MC circuit are derived. Switch states of MC are obtained when the output voltage error function is minimized, thus the optimum combination of switch states is derived for the closed-loop control of MC. Meanwhile, advantages of the least calculation workload, the simple process, and the convenient for implementation are brought while switch states are described as space vectors in the α-β coordination system. Simulation and experimental results demonstrate the validity of the time-discrete modulation technique and the feasibility of the control approach.展开更多
A novel gain-scheduled switching control method for the longitudinal motion of a flexible air-breathing hypersonic vehicle （FAHV） is proposed. Firstly, velocity and altitude are selected as scheduling variables, a p...A novel gain-scheduled switching control method for the longitudinal motion of a flexible air-breathing hypersonic vehicle （FAHV） is proposed. Firstly, velocity and altitude are selected as scheduling variables, a polytopic linear parameter varying （LPV） model is developed to represent the complex nonlinear longitudinal dynamics of the FAHV. Secondly, based on the obtained polytopic LPV model, the flight envelope is divided into four smaller subregions, and four gain-scheduled controllers are designed for these parameter subregions. Then, by the defined switching characteristic function, these gain-scheduled controllers are switched in order to guarantee the closed-loop FAHV system to be asymptotically stable and satisfy a given tracking error performance criterion. The condition of gain-scheduled switching controller synthesis is given in terms of linear matrix inequalities （LMIs） which can be easily solved by using standard software packages. Finally, simulation results show the effectiveness of the presented method.展开更多
We consider quadratic stabilization for a class of switched systems which are composed of a finite set of continuoustime linear subsystems with norm bounded uncertainties. Under the assumption that there is no single ...We consider quadratic stabilization for a class of switched systems which are composed of a finite set of continuoustime linear subsystems with norm bounded uncertainties. Under the assumption that there is no single quadratically stable subsystem, if a convex combination of subsystems is quadratically stable, then we propose a state-dependent switching law, based on the convex combination of subsystems, such that the entire switched linear system is quadratically stable. When the state information is not available, we extend the discussion to designing an outputdependent switching law by constructing a robust Luenberger observer for each subsystem.展开更多
This paper deals with the problem of switching between an open-loop estimator and a close-loop estimator for compensating transmission error and packet dropout of networked control systems. Switching impulse is consid...This paper deals with the problem of switching between an open-loop estimator and a close-loop estimator for compensating transmission error and packet dropout of networked control systems. Switching impulse is considered in order to reduce the error between theory and application, a sufficient condition for exponential stabilization of networked control systems under a given switching rule is presented by multiple Lyapunov-like functions. These results are presented for both continuous-time and discrete-time domains. Controllers are designed by means of linear matrix inequalities. Sim- ulation results show the feasibility and efficiency of the proposed method.展开更多
文摘A rearrangeable nonblocking thermo-optic 4×4 switching matrix,which consists of five 2×2 multimode interference-based Mach-Zehnder interferometer(MMI-MZI) switch elements,is designed and fabricated.The minimum and maximum excess loss for the matrix are 6.6 and 10.4dB,respectively.The crosstalk in the matrix is measured to be between -12 and -19.8dB.The switching speed of the matrix is less than 30μs.The power consumption for the single switch element is about 330mW.
基金This work was supported by the Basic Program in Natural Sciences, Vietnam and Thai Research Fund Grant, Thailand
文摘In this paper, we address the stabilization problem for linear periodically time-varying switched systems. Using discretization technique, we derive new conditions for the global stabilizability in terms of the solution of matrix inequalities. An algorithm for finding stabilizing controller and switching strategy is presented.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB301701)the National High Technology Research and Development Program of China(Grant Nos.2013AA014402+2 种基金2012AA012202and 2015AA016904)the National Natural Science Foundation of China(Grant Nos.61275065 and 61107048)
文摘The first path-independent insertion-loss（PILOSS） strictly non-blocking 4×4 silicon electro–optic switch matrix is reported. The footprint of this switch matrix is only 4.6 mm×1.0 mm. Using single-arm modulation, the crosstalk measured in this test is-13 dB --27 dB. And a maximum crosstalk deterioration of 6d B caused by two-path interference is also found.
文摘Quantum dot cellular automata(QCA)technology is emerging as a future technology which designs the digital circuits at quantum levels.The tech-nology has gained popularity in terms of designing digital circuits,which occupy very less area and less power dissipation in comparison to the present comple-mentary metal oxide semiconductor(CMOS)technology.For designing the rou-ters at quantum levels with non-blocking capabilities various multi-stage networks have been proposed.This manuscript presents the design of the N×NClos switch matrix as a multistage interconnecting network using quantum-dot cellular automata technology.The design of the Clos switch matrix presented in the article uses three input majority gates(MG).To design the 4×4 Clos switch matrix,a basic 2×2 switch architecture has been proposed as a basic mod-ule.The 2×2 switching matrix(SM)design presented in the manuscript utilizes three input majority gates.Also,the 2×2 SM has been proposed usingfive input majority gates.Two different approaches(1&2)have been presented for designing 2×2 SM usingfive input majority gates.The 2×2 SM design based on three input majority gate utilizes four zone clocking scheme to allow signal transmis-sion.Although,the clocking scheme used in 2×2 SM using three input MG and in 2×2 SM approach 1 usingfive input MG is conventional.The 2×2 SM approach 2 design,utilizes the clocking scheme in which clocks can be applied by electricfield generators easily and in turn the switch element becomes physically realizable.The simulation results conclude that the 2×2 SM is suitable for designing a 4×4 Clos network.A higher order of input-output switching matrix,supporting more number of users can utilize the proposed designs.
文摘Based on the output-voltage error function, a novel time discrete modulation technique is proposed for matrix converters （MCs） and time-discrete difference equations of a MC circuit are derived. Switch states of MC are obtained when the output voltage error function is minimized, thus the optimum combination of switch states is derived for the closed-loop control of MC. Meanwhile, advantages of the least calculation workload, the simple process, and the convenient for implementation are brought while switch states are described as space vectors in the α-β coordination system. Simulation and experimental results demonstrate the validity of the time-discrete modulation technique and the feasibility of the control approach.
基金supported by the National Outstanding Youth Science Foundation(61125306)the National Natural Science Foundation of Major Research Plan(91016004+2 种基金61034002)the Specialized Research Fund for the Doctoral Program of Higher Education of China (20110092110020)the Scientific Research Foundation of Graduate School of Southeast University(YBJJ1103)
文摘A novel gain-scheduled switching control method for the longitudinal motion of a flexible air-breathing hypersonic vehicle （FAHV） is proposed. Firstly, velocity and altitude are selected as scheduling variables, a polytopic linear parameter varying （LPV） model is developed to represent the complex nonlinear longitudinal dynamics of the FAHV. Secondly, based on the obtained polytopic LPV model, the flight envelope is divided into four smaller subregions, and four gain-scheduled controllers are designed for these parameter subregions. Then, by the defined switching characteristic function, these gain-scheduled controllers are switched in order to guarantee the closed-loop FAHV system to be asymptotically stable and satisfy a given tracking error performance criterion. The condition of gain-scheduled switching controller synthesis is given in terms of linear matrix inequalities （LMIs） which can be easily solved by using standard software packages. Finally, simulation results show the effectiveness of the presented method.
基金supported in part by the Japan Ministry of Education,Sciences and Culture under Grants-in-Aid for Scientific Research(C)(21560471)the Green Industry Leading Program of Hubei University of Technology(CPYF2017003)the National Natural Science Foundation of China(1160147411461082)
文摘We consider quadratic stabilization for a class of switched systems which are composed of a finite set of continuoustime linear subsystems with norm bounded uncertainties. Under the assumption that there is no single quadratically stable subsystem, if a convex combination of subsystems is quadratically stable, then we propose a state-dependent switching law, based on the convex combination of subsystems, such that the entire switched linear system is quadratically stable. When the state information is not available, we extend the discussion to designing an outputdependent switching law by constructing a robust Luenberger observer for each subsystem.
基金This work was supported by the National Natural Science Foundation of China (No.60574013, 60274009), and the Natural Science Fundation ofLiaoning Province (No.20032020).
文摘This paper deals with the problem of switching between an open-loop estimator and a close-loop estimator for compensating transmission error and packet dropout of networked control systems. Switching impulse is considered in order to reduce the error between theory and application, a sufficient condition for exponential stabilization of networked control systems under a given switching rule is presented by multiple Lyapunov-like functions. These results are presented for both continuous-time and discrete-time domains. Controllers are designed by means of linear matrix inequalities. Sim- ulation results show the feasibility and efficiency of the proposed method.
