Statistic constitutive equation of top-coal damage for fully mechanized coal face with sublevel caving

Under the action of abutment pressure in front of fully mechanized coal face with sublevel caving(CFSC),top-coal over CFSC deformed.In the process of whole de- formation of top-coal,it changed from continuum elastic mass to non-continuum plastic mass contained fissures,become a loose body.According to its bearing characteristics and mechanical properties,top-coal mass can be divided into four deformation zones along the winning direction of CFSC,i.e.initial stress zone,elastic zone,plastic zone and loose zone.Top-coal in plastic zone located in the post-peak zone of the stress-strain curve for top-coal.With equivalent strain principle of damage mechanics and mathemati- cal theory of statistic,combining the movement law of top-coal,set up a constitutive equa- tion with damage statistics for top-coal in different position in CFSC.The equation illus- trated the mathematical relationship among top-coal bearing capacity,horizontal confining pressure along the winning direction of CFSC and mechanical properties of top-coal mate- rial.The conclusions not only provide a basis for numerical computer simulations on damage deformation and failure mechanism for top-coal,but also further promote the ap- plication of damage mechanics in CFSC.

Similar material simulation research on movement law of roof over-lying strata in stope of fully mechanized caving face with large mining height

Similar material simulation test W9-15 101 fully mechanized caving face with was carried out in a geological model of large mining height in the Liuhuanggou Colliery, in Xinjiang Uigur Autonomous Region. The roof overlying strata movement law in the stope of a fully mechanized caving face with large mining height was studied and show that the roof overlying strata in the stope of a fully mechanized caving face with large mining height can be formed into a stable arch structure; the fracture rock beam is formed resembling a ＂bond beam＂, but it has essentially the structure of ＂multi-span beams＂ under the big structure of the stable arch. The roof overlying strata movement law in the stope of a fully mechanized caving face with large mining height is similar to that of the common, fully mechanized caving stope, which is determined by the deformation and instability of the structure of ＂multi-span beams＂. But because of the differences between the mining heights, the peak pressure in the stope of a fully mechanized caving face with large mining height is smaller while the affected area of abutment pressure is wider in the front of the working face; this is the obvious difference in abutment pressure between the stope of a fully mechanized caving face with large mining height and that of the common.

Technological optimization of fully mechanized caving mining face with large mining heights

Fully mechanized cave mining with large mining height is a new mining method, due to its large mining thickness and lower roadway excavation, the technology has been widely used in China＇s thick seam mining. In order to improve the top-coal recovery ratio of fully mechanized cave mining with large mining height, a study was conducted on optimizing the caving process, based on the mechanized caving face 1302N in Longgu Coal Mine. This was achieved by improving the PFC numerical calculation methods, and establishing a more accurate model system. On this basis, the recovery ratio of the top coal in different drawing intervals and technologies was investigated in order to achieve a reasonable caving process. The top-coal tracking system was used for practical surveying of the recovery ratio of top coal.

STUDY ON PRODUCTION SYSTEM OPERATION REGULARITY OF FULLY MECHANIZED SUBLEVEL CAVING MINING AND SEQUENTIAL OPERATION

According to a lot of practical data in Liujialiang Mine and reliability theory and result of computer simulation, operation regularity of fully mechanized sublevel caving mining production system in the condition of gently inclined complicated geological structure and production shortcomings are found out and reliability of system and output of the working face are predicted finally.

Study on rock burst of fully mechanized sublevel caving mining in deep mine

The theoretical analysis, numerical simulation and field observation were used to study distribution characters of abutment pressure of fully mechanized sublevel caving face in deep mine, fully mechanized sublevel caving and pressure relief in entries along goaf to the influence of rock burst. The results show that： （1） With the increasing of mining depth, the abutment pressure zone is larger, its peak point is transferred to the front of face, the danger area occurring rock burst in the two fully mechanized sublevel caving entries is larger, and its position is far from the face; （2） There is larger failure area in the upper coal in front of the fully mechanized caving face, and strata possibly occurring rock burst transferred to the upwards or far from faces because of the main roof＇s buffer effect to the dynamic pressure burst, then possibility and strength reduced; （3） The position occurring rock burst is stress concentration zones （abutment pressure along the goaf and residual tectonic stress） and zones with geological structure; （4） Strenuous activities of roof is the inducing factor occurring rock burst.

Study on dangers of methane in the gob of fully mechanized caving mining

Divided the gob gas in different types according to falling structure and spatial patterns of gob of the fully mechanized caving mining and analyzed its main form of harm. This passage preliminarily studied the law of unusual gush of gob gas of the fully mechanized caving mining. According to the basic condition for the gas explosion, made comprehensive analysis and appraisal about the oxygen condition, gas concentration distribute and fire source conditions. And find that there is the dangerous district of gas explosion in a certain area of the producing gob and give the three zone theory of gob gas explosion.

Analysis of factors of top coal caving in fully mechanized sublevel caving face in soft coal and control

According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based on the above research, one effective method by using field monitoring was brought forward to determine the controlling factor. Then some related key technologies were provided, such as keeping the integrality of the top-coal, raising the horizontal resistance of supports and decreasing the real end-face distance etc.. At last one application of this method was presented, and it was proved to be an effective method.

Arrangement of anchor reinforcement in roadway for fully mechanized sublevel caving

Bolting of mining roadway for fully mechanized sublevel caving has been practised successfully in Hebi mining area.It provides a new method for roadway support and settles the problem of support difficulty radically for sublevel caving in Hebi mining area.Where anchor reinforcement holds an important station in roadway support.This article brings forward the arrangement project of anchor based on theoretic analysis.Compared with arranged in the middle of the entry, anchor arranged in the vertex of the entry can reduces the length of anchor,shortens the anchor installation time,and heightens the reliability of anchor installation.

Back-and-forth mining for hard and thick coal seams—research about the mining technology for fully mechanized caving working face of Datong Mine

The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the systemic design and working face out-play, tried to perfect the caving mining technology of hard-thick coal seams further.

Development and prospect on fully mechanized mining in Chinese coal mines

Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced.The automatic FMM technology for thin seams,complete sets of FMM technology with ultra large shear height of 7 m for thick seams,complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m,complete sets of FMM technology for complex and difficult seams,including steeply inclined seams,soft coal seams with large inclination angle,and the mechanized filling mining technology and equipment are presented.Some typical case studies are also introduced.Finally,the existing problems with the FMM technology are discussed,and prospect of FMM technology and equipment applied in Chinese coal mines is put forward.

Developing Technology of Fully Mechanized Mining with Sublevel Caving Posititvely and Reasonably

ＤｅｖｅｌｏｐｉｎｇＴｅｃｈｎｏｌｏｇｙｏｆＦｕｌｌｙＭｅｃｈａｎｉｚｅｄＭｉｎｉｎｇｗｉｔｈＳｕｂｌｅｖｅｌＣａｖｉｎｇＰｏｓｉｔｉｔｖｅｌｙａｎｄＲｅａｓｏｎａｂｌｙ￥ＬｉｕＸｉｕｙｕｏｎ１Ｄｅｖｅｌｏｐｍｅｎｔａｎｄｐｒｃｓｅｎｔｓｉｔｕａｔｉ...

多频雷达融合的顶煤结构精准探测技术

顶煤结构的准确探测是实现综放智能化开采的重要依据,然而我国煤层结构复杂且内部常含多层夹矸,易影响综放智能化开采的水平。为此,提出一种多频雷达融合的顶煤结构精准探测方法,可提高雷达天线探测深度内的浅部探测精度,同时对顶煤内部的结构信息进行解释。主要研究步骤如下:首先,对不同频率的雷达数据进行预处理和空间对齐,建立不同频率雷达数据之间的空间对应关系;其次,利用滑动窗口与小波变换加权融合方法对多频率雷达数据进行处理,根据窗口内各分段小波信号的能量占比确定各频率信号的时变权重值,并引入边缘检测算法来提高小波变换对雷达数据的融合效率,实现多频雷达数据有效融合;最后,根据煤-矸-岩的介电常数差异和电磁波传播的衰减特性,建立顶煤内部回波强度模型,并利用分层识别方法计算出顶煤内部煤-矸-岩之间的界面信息,进而反演出顶煤内部结构(包括顶煤厚度、夹矸厚度及层数、夹矸层间距等)。试验结果表明:所提出的方法能有效地将不同频率雷达数据进行融合,并能有效地探测出顶煤内部结构特征,且顶煤厚度、夹矸厚度和夹矸层间距的探测误差均小于10%。该方法有助于实现顶煤结构的精准探测,为综放智能化开采提供理论技术支撑。

厚煤层大采高综放工作面覆岩断裂演化规律研究

大采高综放开采易形成强烈的矿压显现,上覆岩层的断裂演化规律对工作面安全生产至关重要。以羊场湾煤矿160206工作面为工程背景,运用相似模拟试验、数值模拟和理论分析的综合研究方法,对大采高综放工作面覆岩的断裂过程与覆岩运移规律进行系统研究。研究表明:导水裂隙带内岩层随工作面推进表现为“台阶下沉”,同层岩层下沉趋势沿走向表现为“急剧下降—稳定(最大值)—快速上升—稳定(最小值)”。工作面覆岩运动场由两区分布(加速下沉区、缓慢下沉区)演化为三区分布(加速下沉区、缓慢下沉区、稳定区)。对离层演化与地表下沉规律进行了定量描述,运用理论计算表达式深入地剖析了地表的动态下沉机理及其相关因素。结合相似模拟与数值模拟的试验结果,提出了覆岩断裂演化的形态变化特征:覆岩断裂形态由“单等腰梯形”演化为“双等腰梯形”,表土层影响区由“矩形”演化为“倒梯形”。分析了覆岩中垮落区、离层区、压实区、裂隙富集区的动态演化过程:垮落区逐渐增大至一定程度,高度小幅度降低并趋于稳定,离层区由下至上逐渐发育并随工作面向前移动,离层区逐渐闭合形成压实区,且压实区逐渐增大并最终保持稳定,裂隙富集区位于采空区前后端部并随工作面向前移动。

黄土梁峁地形大采高煤层开采地表移动规律数值模拟研究

相较于平原地区,黄土梁峁地形下的煤层开采地表移动特征存在明显不同。为分析并揭示梁峁地形下煤层开采地表沉陷异常形变机理,结合现场实测与数值模拟手段,以山西某矿1313工作面为研究对象,对黄土梁峁地形大采高综放开采引起的地表沉陷进行了现场实测,分析了地表移动特征及相关参数取值;利用Rhino软件建立考虑地形的三维模型,导入离散单元法软件3DEC进行数值模拟计算,分析了开采过程中的岩层移动以及梁峁内部塑性破坏演变。研究表明:1313工作面地表移动剧烈,地表下沉起动距小于30 m,超前影响距为73 m,超前影响角为68.7°,走向边界角与上山边界角为40.3°,走向移动角与上山移动角为37.8°,以水平拉伸变形2 mm/m为移动边界的危险移动范围明显大于以下沉值10 mm确定的地表移动盆地范围;利用数值模拟分析黄土梁峁采动滑移过程发现,当工作面自开切眼沿走向回采30 m时,采空区周围岩体应力平衡被打破,顶板在自重以及上覆岩层的载荷作用下产生剪切破坏,采空区周边岩体发生塑性屈服,当工作面回采到120 m时,煤层处于非充分开采阶段,梁峁底部岩体剪切破坏带出现贯通现象,坡体在重力作用下发生向邻空侧的剪切滑移,相较于地表坡度15°的截面,地表坡度18°和22°的截面X轴负方向最大水平移动提升了107.3%与246.5%。

6~10 m厚煤层超大采高液压支架及其工作面系统自适应智能耦合控制

厚煤层储量及产量占我国原煤总储量及产量的一半,通过梳理厚煤层开采历史沿革,总结了我国厚煤层开采40年来的技术及装备研发实践,系统分析了以高端大采高液压支架及围岩智能耦合理论为代表的6~10 m大采高综采高效智能化综采技术及装备研究进展,提出了大采高支护理论及围岩智能耦合控制的突破是厚煤层一次开采高度突破的首要因素,完善的感知体系建立是液压支架自适应支护的前提,数字技术的应用为大采高工作面高效推进及装备智能协同控制提供了新的技术途径;阐明了大采高综放液压支架与围岩耦合关系,剖析了采高增加对硬煤层冒放性的有利影响,提出了基于煤矸识别、放煤机构控制的“纯煤段记忆放煤+煤岩分界模糊段人工反馈式干预放煤”的智能放煤控制策略;分析了大采高开采“采–运”协同智能耦合控制关键技术,构建了基于采煤机牵引速度与刮板输送机链速间联动调节的工作面装备间多机异构耦合自适应协同控制模型;研发了厚煤层开采中10 m超大采高液压支架,分析了厚煤层开采不断突破开采高度极限的新认识,从开采装备、控制系统等方面提出厚煤层一次开采高度的突破的研发方向。

两次采动影响下小煤柱巷道切顶卸压围岩控制技术

为解决多次采动影响下留小煤柱巷道矿压显现剧烈、围岩变形量大的问题,提出了“切顶卸压+顶、帮锚索补强”联合控制技术。以贾家沟煤矿10115运输巷为工程背景,分析了切顶卸压位置、高度与巷道围岩垂直应力分布的关系,给出切顶卸压关键参数,并研究了留小煤柱巷道在切顶卸压后受两次采动影响下的矿压显现规律。结果表明:切顶卸压后,煤柱上的应力峰值随切顶深度的增加呈指数降低;10115运输巷在邻近工作面一次采动过程中巷道围岩变形依次呈现出无变形、缓慢变形、快速变形和围岩稳定的变化规律,本工作面二次采动过程中巷道围岩变形依次呈现出明显变形和剧烈变形的规律;巷道围岩在受二次采动影响时变形更加剧烈,巷道变形量为一次采动时的3.0~7.5倍。

深埋薄基岩下区段煤柱工作面综放开采可行性研究

赵固二矿在对二1煤层回采过程中,使用分层开采并留设较宽的区段煤柱。矿井拟对区段煤柱进行回采,以赵固二矿二盘区里侧煤柱工作面为工程背景,通过岩石物理力学测试、煤体裂隙观测及顶煤冒放性评价对工作面综放开采适应性进行综合分析,得出煤柱受临近工作面回采影响,裂隙发育,顶煤强度低,顶煤冒放性评价为好;针对深埋薄基岩等条件下煤柱综放开采进行了安全论证,得到了二盘区里侧煤柱工作面可实施综采放顶煤工艺的结论,并进行现场工业性试验,目前已实现安全回采。该研究可为实现区段煤柱综放开采提供成熟方案。

近距离煤层厚硬顶板综放开采强矿压显现规律研究

针对厚硬顶板大采高综放工作面回采过程中强矿压的现象,以神东矿区某矿井近距离煤层厚硬顶板综放工作面为背景,通过现场实测和室内试验等方式,研究工作面矿压显现规律及覆岩破断特征。研究表明:(1)42105综放工作面老顶初次来压步距大,来压强度高,远超工作面支架额定工作阻力,工作面呈现出中部来压集中、强度高且较为频繁的特征;(2)近距离厚硬顶板下回采工作面时,重复采动下工作面覆岩破坏高度更大,尤其是上位关键层破断后带动下位关键层同时破断,并带动其控制的上覆岩层及上方采空区同步下沉,岩层载荷逐层向下传导至工作面,上下位关键层破断的协同作用,从而造成了工作面来压强烈。

近距煤层合层综放工作面矿压显现规律研究

针对近距煤层合层综放开采覆岩移动破坏与矿压显现规律等问题,以涡北煤矿842首采综放工作面为工程背景,采用相似模拟试验和数值分析手段对工作面开采过程进行研究。结果表明:相似模拟试验下覆岩冒落带高度为38 m,开切眼附近裂隙带的高度为103.8 m,停采线附近裂隙带的高度为95.4 m,基本顶初次来压步距为28 m,周期来压步距为17.5 m。由数值分析得到采场围岩位移场与应力场的变化颇为相似,分析采场前方支承压力分布特征与相似模拟试验的结果相吻合。研究结果可为近距煤层合层综放工作面煤柱宽度、工作面支护参数设计提供技术指导。

24110工作面强制放顶安全管理

为减小24110综采工作面初次来压时顶板大面积垮落而形成的飓风,避免造成工作面设备和施工人员受伤,采用深孔预裂爆破技术强制放顶,根据煤层顶板破拆原理,并结合4上号煤层顶板实际情况,58个炮眼分别设计在工采面两条顺槽内,以保证工采面初压时的安全生产。