STUDY ON PRODUCTION SYSTEM OPERATION REGULARITY OF FULLY MECHANIZED SUBLEVEL CAVING MINING AND SEQUENTIAL OPERATION

According to a lot of practical data in Liujialiang Mine and reliability theory and result of computer simulation, operation regularity of fully mechanized sublevel caving mining production system in the condition of gently inclined complicated geological structure and production shortcomings are found out and reliability of system and output of the working face are predicted finally.

Similar material simulation research on movement law of roof over-lying strata in stope of fully mechanized caving face with large mining height

Similar material simulation test W9-15 101 fully mechanized caving face with was carried out in a geological model of large mining height in the Liuhuanggou Colliery, in Xinjiang Uigur Autonomous Region. The roof overlying strata movement law in the stope of a fully mechanized caving face with large mining height was studied and show that the roof overlying strata in the stope of a fully mechanized caving face with large mining height can be formed into a stable arch structure; the fracture rock beam is formed resembling a ＂bond beam＂, but it has essentially the structure of ＂multi-span beams＂ under the big structure of the stable arch. The roof overlying strata movement law in the stope of a fully mechanized caving face with large mining height is similar to that of the common, fully mechanized caving stope, which is determined by the deformation and instability of the structure of ＂multi-span beams＂. But because of the differences between the mining heights, the peak pressure in the stope of a fully mechanized caving face with large mining height is smaller while the affected area of abutment pressure is wider in the front of the working face; this is the obvious difference in abutment pressure between the stope of a fully mechanized caving face with large mining height and that of the common.

Technological optimization of fully mechanized caving mining face with large mining heights

Fully mechanized cave mining with large mining height is a new mining method, due to its large mining thickness and lower roadway excavation, the technology has been widely used in China＇s thick seam mining. In order to improve the top-coal recovery ratio of fully mechanized cave mining with large mining height, a study was conducted on optimizing the caving process, based on the mechanized caving face 1302N in Longgu Coal Mine. This was achieved by improving the PFC numerical calculation methods, and establishing a more accurate model system. On this basis, the recovery ratio of the top coal in different drawing intervals and technologies was investigated in order to achieve a reasonable caving process. The top-coal tracking system was used for practical surveying of the recovery ratio of top coal.

Study on dangers of methane in the gob of fully mechanized caving mining

Divided the gob gas in different types according to falling structure and spatial patterns of gob of the fully mechanized caving mining and analyzed its main form of harm. This passage preliminarily studied the law of unusual gush of gob gas of the fully mechanized caving mining. According to the basic condition for the gas explosion, made comprehensive analysis and appraisal about the oxygen condition, gas concentration distribute and fire source conditions. And find that there is the dangerous district of gas explosion in a certain area of the producing gob and give the three zone theory of gob gas explosion.

Back-and-forth mining for hard and thick coal seams—research about the mining technology for fully mechanized caving working face of Datong Mine

The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the systemic design and working face out-play, tried to perfect the caving mining technology of hard-thick coal seams further.

Development and prospect on fully mechanized mining in Chinese coal mines

Fully mechanized mining(FMM)technology has been applied in Chinese coal mines for more than 40 years.At present,the output of a FMM face has reached 10-million tons with Chinese-made equipment.In this study,the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced.The automatic FMM technology for thin seams,complete sets of FMM technology with ultra large shear height of 7 m for thick seams,complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m,complete sets of FMM technology for complex and difficult seams,including steeply inclined seams,soft coal seams with large inclination angle,and the mechanized filling mining technology and equipment are presented.Some typical case studies are also introduced.Finally,the existing problems with the FMM technology are discussed,and prospect of FMM technology and equipment applied in Chinese coal mines is put forward.

Developing Technology of Fully Mechanized Mining with Sublevel Caving Posititvely and Reasonably

ＤｅｖｅｌｏｐｉｎｇＴｅｃｈｎｏｌｏｇｙｏｆＦｕｌｌｙＭｅｃｈａｎｉｚｅｄＭｉｎｉｎｇｗｉｔｈＳｕｂｌｅｖｅｌＣａｖｉｎｇＰｏｓｉｔｉｔｖｅｌｙａｎｄＲｅａｓｏｎａｂｌｙ￥ＬｉｕＸｉｕｙｕｏｎ１Ｄｅｖｅｌｏｐｍｅｎｔａｎｄｐｒｃｓｅｎｔｓｉｔｕａｔｉ...

综放工作面动态注氮参数研究及数值模拟

针对目前防灭火注氮工程中存在的资源浪费、效率低等问题,本文提出了一种动态注氮的防灭火方法。围绕朱仙庄矿884工作面,开展采空区自燃“三带”测定,通过连续监测束管数据获得氧气浓度。依据氧气浓度含量,利用Fluent模拟软件构建计算模型,模拟不同注氮位置和注氮流量对自燃“三带”分布的影响,确定动态注氮工艺参数。结果表明:注氮位置在进风侧距离工作面30~60 m,注氮量为440~500 m^(3)/h时,动态注氮防灭火效果最佳,效益最好。

综放开采下煤层底板采动破坏深度预测

以淮南顾北煤矿12121工作面为工程研究背景,收集了22个综放工作面地质资料和底板破坏深度实测值,通过线性回归分析建立新的预测模型,得出了底板采动破坏深度的拟合公式,准确计算出底板采动破坏的深度,并将计算值及3个传统统计公式计算结果与现场实测值进行对比分析,得出新预测模型拟合公式比传统统计公式预测精度更高、误差更小,更接近实测值,基本可以满足现场需要。研究成果对淮南矿区煤层综放开采水害防治具有较高的实用价值,为类似工作面的水害防治提供更为科学的依据。

综放工作面液压支架快速回撤技术研究

以11203综放工作面液压支架回撤为工程背景,在分析采面地质、开采设备配备基础上,构建末采期间顶板控制及设备回撤方案并进行工程应用。在11203综放工作面回撤期间采用全断面掩护支架法可提高回撤通道顶板稳定性,同时使用架前撤架装置+铲板车+框式支架车协同方式提高液压支架回撤机械化程度、效率,实现液压支架回撤环节平行作业。现场应用后,11203综放工作面液压支架回撤效率得以明显提高,实现了快速回撤、减人增效的目标。

Ground pressure and overlying strata structure for a repeated mining face of residual coal after room and pillar mining

To investigate the abnormal ground pressures and roof control problem in fully mechanized repeated mining of residual coal after room and pillar mining, the roof fracture structural model and mechanical model were developed using numerical simulation and theoretical analysis. The roof fracture characteristics of a repeated mining face were revealed and the ground pressure law and roof supporting condi- tions of the repeated mining face were obtained. The results indicate that when the repeated mining face passes the residual pillars, the sudden instability causes fracturing in the main roof above the old goal and forms an extra-large rock block above the mining face. A relatively stable ＂Voussoir beam＂ structure is formed after the advance fracturing of the main roof. When the repeated mining face passes the old goaf, as the large rock block revolves and touches gangue, the rock block will break secondarily under overburden rock loads. An example calculation was performed involving an integrated mine in Shanxi province, results showed that minimum working resistance values of support determined to be reason- able were respectively 11,412 kN and 10,743 kN when repeated mining face passed through residual pillar and goaf. On-site ground pressure monitoring results indicated that the mechanical model and support resistance calculation were reasonable.

综放工作面围岩控制与智能化放煤技术现状及展望

分析了厚及特厚煤层智能化综放工作面围岩控制技术与智能化放顶煤技术发展现状及存在的问题,从巷道围岩高效支护、工作面超前支护、坚硬特厚顶煤冒放性、液压支架位姿监测及智能化放顶煤5个方面提出了工程实际需求。针对综放工作面实现安全、高效、智能化开采存在的技术难题与工程需求,对综放工作面围岩控制技术、智能化放煤技术进行了研究:构建了坚硬特厚煤层顶煤悬臂梁力学模型,研发了提高顶煤冒放性及放出率关键技术,实现了坚硬特厚煤层超大采高综放开采;研发了单元式超前液压支架顶梁可旋转自复位装置,实现了液压支架顶梁根据巷道顶板倾斜角度自动旋转支护,有效提高了单元式超前液压支架对巷道顶底板的适应性;提出了采用巷道支护液压支架替代传统锚网支护结构的思路,具有支护效率高、成本低、节省工作面超前支护等优点;开发了基于立柱与尾梁千斤顶行程的综放液压支架支护姿态监测装置与算法,提高了液压支架支护姿态解算效率与精度;提出了基于透明地质模型、煤量监测装置与煤矸识别装置融合的智能放煤控制方法,可有效解决多夹矸层特厚顶煤智能化放煤技术难题。提出智能地质保障技术、机器视觉精准测量与智能感知技术、综放工作面设备智能精准自适应控制技术、综放工作面数字孪生技术等是智能化综放开采技术与装备的发展趋势。

厚煤层大采高综放工作面覆岩断裂演化规律研究

大采高综放开采易形成强烈的矿压显现,上覆岩层的断裂演化规律对工作面安全生产至关重要。以羊场湾煤矿160206工作面为工程背景,运用相似模拟试验、数值模拟和理论分析的综合研究方法,对大采高综放工作面覆岩的断裂过程与覆岩运移规律进行系统研究。研究表明:导水裂隙带内岩层随工作面推进表现为“台阶下沉”,同层岩层下沉趋势沿走向表现为“急剧下降—稳定(最大值)—快速上升—稳定(最小值)”。工作面覆岩运动场由两区分布(加速下沉区、缓慢下沉区)演化为三区分布(加速下沉区、缓慢下沉区、稳定区)。对离层演化与地表下沉规律进行了定量描述,运用理论计算表达式深入地剖析了地表的动态下沉机理及其相关因素。结合相似模拟与数值模拟的试验结果,提出了覆岩断裂演化的形态变化特征:覆岩断裂形态由“单等腰梯形”演化为“双等腰梯形”,表土层影响区由“矩形”演化为“倒梯形”。分析了覆岩中垮落区、离层区、压实区、裂隙富集区的动态演化过程:垮落区逐渐增大至一定程度,高度小幅度降低并趋于稳定,离层区由下至上逐渐发育并随工作面向前移动,离层区逐渐闭合形成压实区,且压实区逐渐增大并最终保持稳定,裂隙富集区位于采空区前后端部并随工作面向前移动。

多频雷达融合的顶煤结构精准探测技术

顶煤结构的准确探测是实现综放智能化开采的重要依据,然而我国煤层结构复杂且内部常含多层夹矸,易影响综放智能化开采的水平。为此,提出一种多频雷达融合的顶煤结构精准探测方法,可提高雷达天线探测深度内的浅部探测精度,同时对顶煤内部的结构信息进行解释。主要研究步骤如下:首先,对不同频率的雷达数据进行预处理和空间对齐,建立不同频率雷达数据之间的空间对应关系;其次,利用滑动窗口与小波变换加权融合方法对多频率雷达数据进行处理,根据窗口内各分段小波信号的能量占比确定各频率信号的时变权重值,并引入边缘检测算法来提高小波变换对雷达数据的融合效率,实现多频雷达数据有效融合;最后,根据煤-矸-岩的介电常数差异和电磁波传播的衰减特性,建立顶煤内部回波强度模型,并利用分层识别方法计算出顶煤内部煤-矸-岩之间的界面信息,进而反演出顶煤内部结构(包括顶煤厚度、夹矸厚度及层数、夹矸层间距等)。试验结果表明:所提出的方法能有效地将不同频率雷达数据进行融合,并能有效地探测出顶煤内部结构特征,且顶煤厚度、夹矸厚度和夹矸层间距的探测误差均小于10%。该方法有助于实现顶煤结构的精准探测,为综放智能化开采提供理论技术支撑。

6~10 m厚煤层超大采高液压支架及其工作面系统自适应智能耦合控制

厚煤层储量及产量占我国原煤总储量及产量的一半,通过梳理厚煤层开采历史沿革,总结了我国厚煤层开采40年来的技术及装备研发实践,系统分析了以高端大采高液压支架及围岩智能耦合理论为代表的6~10 m大采高综采高效智能化综采技术及装备研究进展,提出了大采高支护理论及围岩智能耦合控制的突破是厚煤层一次开采高度突破的首要因素,完善的感知体系建立是液压支架自适应支护的前提,数字技术的应用为大采高工作面高效推进及装备智能协同控制提供了新的技术途径;阐明了大采高综放液压支架与围岩耦合关系,剖析了采高增加对硬煤层冒放性的有利影响,提出了基于煤矸识别、放煤机构控制的“纯煤段记忆放煤+煤岩分界模糊段人工反馈式干预放煤”的智能放煤控制策略;分析了大采高开采“采–运”协同智能耦合控制关键技术,构建了基于采煤机牵引速度与刮板输送机链速间联动调节的工作面装备间多机异构耦合自适应协同控制模型;研发了厚煤层开采中10 m超大采高液压支架,分析了厚煤层开采不断突破开采高度极限的新认识,从开采装备、控制系统等方面提出厚煤层一次开采高度的突破的研发方向。

两次采动影响下小煤柱巷道切顶卸压围岩控制技术

为解决多次采动影响下留小煤柱巷道矿压显现剧烈、围岩变形量大的问题,提出了“切顶卸压+顶、帮锚索补强”联合控制技术。以贾家沟煤矿10115运输巷为工程背景,分析了切顶卸压位置、高度与巷道围岩垂直应力分布的关系,给出切顶卸压关键参数,并研究了留小煤柱巷道在切顶卸压后受两次采动影响下的矿压显现规律。结果表明:切顶卸压后,煤柱上的应力峰值随切顶深度的增加呈指数降低;10115运输巷在邻近工作面一次采动过程中巷道围岩变形依次呈现出无变形、缓慢变形、快速变形和围岩稳定的变化规律,本工作面二次采动过程中巷道围岩变形依次呈现出明显变形和剧烈变形的规律;巷道围岩在受二次采动影响时变形更加剧烈,巷道变形量为一次采动时的3.0~7.5倍。

黄土梁峁地形大采高煤层开采地表移动规律数值模拟研究

相较于平原地区,黄土梁峁地形下的煤层开采地表移动特征存在明显不同。为分析并揭示梁峁地形下煤层开采地表沉陷异常形变机理,结合现场实测与数值模拟手段,以山西某矿1313工作面为研究对象,对黄土梁峁地形大采高综放开采引起的地表沉陷进行了现场实测,分析了地表移动特征及相关参数取值;利用Rhino软件建立考虑地形的三维模型,导入离散单元法软件3DEC进行数值模拟计算,分析了开采过程中的岩层移动以及梁峁内部塑性破坏演变。研究表明:1313工作面地表移动剧烈,地表下沉起动距小于30 m,超前影响距为73 m,超前影响角为68.7°,走向边界角与上山边界角为40.3°,走向移动角与上山移动角为37.8°,以水平拉伸变形2 mm/m为移动边界的危险移动范围明显大于以下沉值10 mm确定的地表移动盆地范围;利用数值模拟分析黄土梁峁采动滑移过程发现,当工作面自开切眼沿走向回采30 m时,采空区周围岩体应力平衡被打破,顶板在自重以及上覆岩层的载荷作用下产生剪切破坏,采空区周边岩体发生塑性屈服,当工作面回采到120 m时,煤层处于非充分开采阶段,梁峁底部岩体剪切破坏带出现贯通现象,坡体在重力作用下发生向邻空侧的剪切滑移,相较于地表坡度15°的截面,地表坡度18°和22°的截面X轴负方向最大水平移动提升了107.3%与246.5%。

深埋薄基岩下区段煤柱工作面综放开采可行性研究

赵固二矿在对二1煤层回采过程中,使用分层开采并留设较宽的区段煤柱。矿井拟对区段煤柱进行回采,以赵固二矿二盘区里侧煤柱工作面为工程背景,通过岩石物理力学测试、煤体裂隙观测及顶煤冒放性评价对工作面综放开采适应性进行综合分析,得出煤柱受临近工作面回采影响,裂隙发育,顶煤强度低,顶煤冒放性评价为好;针对深埋薄基岩等条件下煤柱综放开采进行了安全论证,得到了二盘区里侧煤柱工作面可实施综采放顶煤工艺的结论,并进行现场工业性试验,目前已实现安全回采。该研究可为实现区段煤柱综放开采提供成熟方案。

近距离煤层厚硬顶板综放开采强矿压显现规律研究

针对厚硬顶板大采高综放工作面回采过程中强矿压的现象,以神东矿区某矿井近距离煤层厚硬顶板综放工作面为背景,通过现场实测和室内试验等方式,研究工作面矿压显现规律及覆岩破断特征。研究表明:(1)42105综放工作面老顶初次来压步距大,来压强度高,远超工作面支架额定工作阻力,工作面呈现出中部来压集中、强度高且较为频繁的特征;(2)近距离厚硬顶板下回采工作面时,重复采动下工作面覆岩破坏高度更大,尤其是上位关键层破断后带动下位关键层同时破断,并带动其控制的上覆岩层及上方采空区同步下沉,岩层载荷逐层向下传导至工作面,上下位关键层破断的协同作用,从而造成了工作面来压强烈。

龙泉煤矿4301工作面导水裂隙带动态发育高度研究

针对龙泉煤矿4301大采高综放工作面顶板砂岩裂隙水易突水涌入工作面的开采难题,采用理论分析和数值模拟两种研究方法,探究了4301工作面开采过程中导水裂隙带发育高度的动态演化规律。数值模拟研究表明,4301工作面推进距离小于96 m时,导水裂隙带的发育高度随工作面推进而不断增加,发育最大高度约为75 m;工作面推进距离大于96 m后,导水裂隙带发育高度变化较小,基本稳定于75 m。该研究结果与理论分析所得导水裂隙带发育范围在57~75 m基本吻合,表明数值模拟结果具有一定合理性;工作面覆岩上方K4、K5含水砂岩层处于导水裂隙带发育范围内,保水开采中应重点考虑K4、K5含水砂岩层不被破坏。研究成果揭示了龙泉煤矿4#煤层开采导水裂隙带动态发育特征及其终态发育高度,对于4#煤层开采中覆岩含水层受扰动范围的确定具有重要意义。该研究成果可为类似条件下煤炭资源的安全与绿色开采提供一定参考。