Effect of the concentration ratios of organosiloxane/initiator and treatment temperature on the characteristics of hydrophobic products obtained by modification of surface of fumed silica with poly(methylphenylsiloxan...Effect of the concentration ratios of organosiloxane/initiator and treatment temperature on the characteristics of hydrophobic products obtained by modification of surface of fumed silica with poly(methylphenylsiloxane) (PMPS) in the presence of dimethyl carbonate has been studied. Morphology, particle size, surface area and coating microstructure of modified silicas were analyzed by methods of transmission electron and atomic force microscopies, nitrogen adsorption-desorption data. Carbon contents in the grafted modifying layer of organosilicas were determined using IR spectroscopy and elemental analysis. Hydrophilic-hydrophobic properties of surface of the obtained modified silicas were estimated by measurements of contact angles of wetting. It was shown that modification of pyrogenic silicas with mixtures of poly(methylphenylsiloxane) and dimethyl carbonate allows to obtain the homogeneous hydrophobic products and serve their nanodispersity.展开更多
The synthesis procedures and physical properties of the ambient dried hydrophobic silica aerogels by using different contents of ethanol （EtOH）/trimethylchlorosilane （TMCS）/n-Hexane as surface modification agent w...The synthesis procedures and physical properties of the ambient dried hydrophobic silica aerogels by using different contents of ethanol （EtOH）/trimethylchlorosilane （TMCS）/n-Hexane as surface modification agent were investigated. One-step solvent exchange and surface modification were simultaneously progressed by immersing silica hydrogels in EtOH/TMCS/n-Hexane solution. It is found that microstructures as well as properties of silica aerogels like porosity, specific density and specific surface area are affected by the contents of surface modification agent in the sol from the results of SEM, TEM morphology, FT-IR chemical structure, BET surface area and BJH pore size analyses. The volume of TMCS is of 10% and 20% of hydrogels, and the final product is hydrophilic xerogels. When TMCS＇s percent （v/v） is elevated to 75 %-100%, hydrophobic silica aerogels with good performance are synthesized, the porosities of aerogels are in the range of 93.5%-95.8% and the average pore size diameter is less than 20 nm.展开更多
As a solid foam stabilizer, spherical silica particles with diameters ranging from 150 to 190 nm were prepared via an improved Stober methOd and were subsequently modified using three different silane coupling agents ...As a solid foam stabilizer, spherical silica particles with diameters ranging from 150 to 190 nm were prepared via an improved Stober methOd and were subsequently modified using three different silane coupling agents to attain the optimum surface hydrophobicity of the particles. Fourier transform infrared （FTIR） spectra and the measured contact angles were used to characterize the surface properties of the prepared particles. The foam stability was investigated by the foam drainage half-life and the expansion viscoelastic modulus of the liquid film. The results demonstrate that all of the modified silica nanoparticles effectively improve the foam stability. The surface hydrophobicity of the modified particles is found to be a key factor influencing the foam stability. The optimum contact angle of the particles lies in the ap- proximate range from 50° to 55°. The modifier molecular structure used can also influence the stabilizing foam property of the solid particles The foam system stabilized by （CH3）2SiCl2-modified silica particles exhibits the highest stability; its drainage half-life at maximum increases by 27% compared to that of the blank foam system and is substantially greater than those of the foam systems stabilized by KH570- and KH550-modified particles.展开更多
To improve the efficiency of coal seam water injection,the influence of nanofluids on coal surface wettability was studied based on the nano drag reduction and injection enhancement technology in the field of tertiary...To improve the efficiency of coal seam water injection,the influence of nanofluids on coal surface wettability was studied based on the nano drag reduction and injection enhancement technology in the field of tertiary oil recovery.The composition optimization and performance evaluation of nanofluids with nano-silica and sodium lauryl sulfate as the main components were carried out,and the effects of the nanofluid with the optimal ratio on coal wettability were studied through spontaneous upward imbibition experiments.The results show that the composite nanofluid has a lower surface tension,and the lowest value of the interfacial tension is 15.79 m N/m.Therefore,the composite nanofluid can enhance the wettability of coal.However,its effects on coal samples with different metamorphic degrees is different,that is,low rank coal is the largest,middle rank coal is the second,and high rank coal is the least.In addition,a functional relationship between time and imbibition height is found for pulverized coal with different particle sizes.When the particle size of pulverized coal is 60–80 mesh,the wettability of nanofluid to coal is best.The findings in this paper provide a new perspective for improving the water injection efficiency for coal seams with low permeability.展开更多
文摘Effect of the concentration ratios of organosiloxane/initiator and treatment temperature on the characteristics of hydrophobic products obtained by modification of surface of fumed silica with poly(methylphenylsiloxane) (PMPS) in the presence of dimethyl carbonate has been studied. Morphology, particle size, surface area and coating microstructure of modified silicas were analyzed by methods of transmission electron and atomic force microscopies, nitrogen adsorption-desorption data. Carbon contents in the grafted modifying layer of organosilicas were determined using IR spectroscopy and elemental analysis. Hydrophilic-hydrophobic properties of surface of the obtained modified silicas were estimated by measurements of contact angles of wetting. It was shown that modification of pyrogenic silicas with mixtures of poly(methylphenylsiloxane) and dimethyl carbonate allows to obtain the homogeneous hydrophobic products and serve their nanodispersity.
基金Funded by the National Mega-Project of Scientific & Technical Sup-porting Programs, Ministry of Science & Technology of China(No.2006BAJ04A 04)the Science Foundation of Liaoning Province,China (No.20062147)
文摘The synthesis procedures and physical properties of the ambient dried hydrophobic silica aerogels by using different contents of ethanol （EtOH）/trimethylchlorosilane （TMCS）/n-Hexane as surface modification agent were investigated. One-step solvent exchange and surface modification were simultaneously progressed by immersing silica hydrogels in EtOH/TMCS/n-Hexane solution. It is found that microstructures as well as properties of silica aerogels like porosity, specific density and specific surface area are affected by the contents of surface modification agent in the sol from the results of SEM, TEM morphology, FT-IR chemical structure, BET surface area and BJH pore size analyses. The volume of TMCS is of 10% and 20% of hydrogels, and the final product is hydrophilic xerogels. When TMCS＇s percent （v/v） is elevated to 75 %-100%, hydrophobic silica aerogels with good performance are synthesized, the porosities of aerogels are in the range of 93.5%-95.8% and the average pore size diameter is less than 20 nm.
基金financially supported by the National Natural Science Foundation of China(No.21276022)the China National Petroleum Corporation Innovation Foundation(No.2012D-5006-0208)
文摘As a solid foam stabilizer, spherical silica particles with diameters ranging from 150 to 190 nm were prepared via an improved Stober methOd and were subsequently modified using three different silane coupling agents to attain the optimum surface hydrophobicity of the particles. Fourier transform infrared （FTIR） spectra and the measured contact angles were used to characterize the surface properties of the prepared particles. The foam stability was investigated by the foam drainage half-life and the expansion viscoelastic modulus of the liquid film. The results demonstrate that all of the modified silica nanoparticles effectively improve the foam stability. The surface hydrophobicity of the modified particles is found to be a key factor influencing the foam stability. The optimum contact angle of the particles lies in the ap- proximate range from 50° to 55°. The modifier molecular structure used can also influence the stabilizing foam property of the solid particles The foam system stabilized by （CH3）2SiCl2-modified silica particles exhibits the highest stability; its drainage half-life at maximum increases by 27% compared to that of the blank foam system and is substantially greater than those of the foam systems stabilized by KH570- and KH550-modified particles.
基金supported by the National Natural Science Foundation of China(Nos.51974176,51934004,52174194)the Shandong Province Natural Science Foundation of Outstanding Youth Fund(ZR2020JQ22)+1 种基金the Shandong Province Colleges and Universities Youth Innovation and Technology Support Program(2019KJH006)the Special funds for Taishan scholar project(TS20190935)。
文摘To improve the efficiency of coal seam water injection,the influence of nanofluids on coal surface wettability was studied based on the nano drag reduction and injection enhancement technology in the field of tertiary oil recovery.The composition optimization and performance evaluation of nanofluids with nano-silica and sodium lauryl sulfate as the main components were carried out,and the effects of the nanofluid with the optimal ratio on coal wettability were studied through spontaneous upward imbibition experiments.The results show that the composite nanofluid has a lower surface tension,and the lowest value of the interfacial tension is 15.79 m N/m.Therefore,the composite nanofluid can enhance the wettability of coal.However,its effects on coal samples with different metamorphic degrees is different,that is,low rank coal is the largest,middle rank coal is the second,and high rank coal is the least.In addition,a functional relationship between time and imbibition height is found for pulverized coal with different particle sizes.When the particle size of pulverized coal is 60–80 mesh,the wettability of nanofluid to coal is best.The findings in this paper provide a new perspective for improving the water injection efficiency for coal seams with low permeability.
