Aiming at the deficiencies of analysis capacity from different levels and fuzzy treating method in product function modeling of conceptual design, the theory of quotient space and universal triple I fuzzy reasoning me...Aiming at the deficiencies of analysis capacity from different levels and fuzzy treating method in product function modeling of conceptual design, the theory of quotient space and universal triple I fuzzy reasoning method are introduced, and then the function modeling algorithm based on the universal triple I fuzzy reasoning method is proposed. Firstly, the product function granular model based on the quotient space theory is built, with its function granular representation and computing rules defined at the same time. Secondly, in order to quickly achieve function granular model from function requirement, the function modeling method based on universal triple I fuzzy reasoning is put forward. Within the fuzzy reasoning of universal triple I method, the small-distance-activating method is proposed as the kernel of fuzzy reasoning; how to change function requirements to fuzzy ones, fuzzy computing methods, and strategy of fuzzy reasoning are respectively investigated as well; the function modeling algorithm based on the universal triple I fuzzy reasoning method is achieved. Lastly, the validity of the function granular model and function modeling algorithm is validated. Through our method, the reasonable function granular model can be quickly achieved from function requirements, and the fuzzy character of conceptual design can be well handled, which greatly improves conceptual design.展开更多
According to the Fick＇s second law of diffusion, six analytical solutions of chloride profile in concrete were studied and discussed with regard to different boundary and initial conditions. In those analytical solut...According to the Fick＇s second law of diffusion, six analytical solutions of chloride profile in concrete were studied and discussed with regard to different boundary and initial conditions. In those analytical solutions, the most prevailing error-function solution which is based on semi-infinite assumption is the simple one, but may under-estimate the chloride content in concrete and over-rate the life time prediction of concrete structures. The experimental results show that compared with other solutions, the chloride content in concrete predicted by error-function model is the minimum, and the calculation difference produced by different analytical models should not be ignored. The influence of models on chloride content prediction is more than other environment and material coefficients in some time. In order to get a more realistic prediction model, modification to error-function model is suggested based on analysis and calculation examples concerning the boundary and edge effect.展开更多
CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. There...CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs（AAG） is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System（FSMARS）, is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.展开更多
An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least ...An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%～20% and the piles' bearing state is improved greatly.展开更多
The paper describes research aimed at developing a configuration system to support theconceptual design of mechanical fasteners. A prototype configuration system has been developedwhich allows designers to interactive...The paper describes research aimed at developing a configuration system to support theconceptual design of mechanical fasteners. A prototype configuration system has been developedwhich allows designers to interactively configure fastener designs using geometric and functionalicons , freely without regard to physical constraints, with the aim of forming candidate designs.Candidate designs are then passed to the qualitative modeller which uses qualrtative reasoningtechniques to evaluate the configuration. Supporting the above design procedure is a knowledgebase which contains object descriptions of fasteners and fastener features (given in terms ofgeometry, function, performance, material,installation). Design rules (expressing spatial andcasual relationships of fastener features),which are required during the evaluation of candidatefastener configurations, are also contained in the knowledge base.展开更多
针对部分机电产品在概念设计阶段未综合考虑客户和环境的需求,进而影响产品详细设计的问题,提出了一种基于功能—结构—客户和环境需求(function‒structure‒requirements of customer and environment,FSRce)模型的机电产品绿色概念设...针对部分机电产品在概念设计阶段未综合考虑客户和环境的需求,进而影响产品详细设计的问题,提出了一种基于功能—结构—客户和环境需求(function‒structure‒requirements of customer and environment,FSRce)模型的机电产品绿色概念设计方案生成方法。首先,从案例库中选择合适的功能和结构对现有产品设计树中的节点进行扩展和关联;同时通过数据挖掘、专家打分等方法获得产品的客户和环境需求重要度,以构建基于FSRce模型的产品概念设计空间。然后,先利用加权区间粗糙数法对客户和环境需求重要度进行分析,得到需求相对重要度,再运用模糊质量功能展开(fuzzy quality function deployment,FQFD)将需求相对重要度转化为产品的工程特性权重。最后,利用物元理论构建基于工程特性的产品物元域和各结构物元集,并结合工程特性权重得到各结构的满意度分值,通过比较满意度优选得到满足客户和环境需求的产品概念设计方案。以某小型工业吹风机为例,基于上述方法对其概念设计方案进行优化。相比于原始方案,优化后的吹风机在能源消耗上降低了15.38%,在碳排放上降低了15.32%,且客户满意度提高了44.66%,由此验证了所提出方法的可行性与有效性。所提出的方法为机电产品概念设计方案的生成提供了一种新思路,能更好地辅助设计人员实现对机电产品的绿色设计。展开更多
基金Supported by Chinese National Science Foundation(61070124)Fundamental Research Funds for the Central Universities(2010HGBZ0565, 2010HGZY0001)Talented Youth Foundation of Anhui universities(2010SQRL013ZD)
文摘Aiming at the deficiencies of analysis capacity from different levels and fuzzy treating method in product function modeling of conceptual design, the theory of quotient space and universal triple I fuzzy reasoning method are introduced, and then the function modeling algorithm based on the universal triple I fuzzy reasoning method is proposed. Firstly, the product function granular model based on the quotient space theory is built, with its function granular representation and computing rules defined at the same time. Secondly, in order to quickly achieve function granular model from function requirement, the function modeling method based on universal triple I fuzzy reasoning is put forward. Within the fuzzy reasoning of universal triple I method, the small-distance-activating method is proposed as the kernel of fuzzy reasoning; how to change function requirements to fuzzy ones, fuzzy computing methods, and strategy of fuzzy reasoning are respectively investigated as well; the function modeling algorithm based on the universal triple I fuzzy reasoning method is achieved. Lastly, the validity of the function granular model and function modeling algorithm is validated. Through our method, the reasonable function granular model can be quickly achieved from function requirements, and the fuzzy character of conceptual design can be well handled, which greatly improves conceptual design.
基金Funded by the National Key Technology R&D Program(No.2011BAG07B04)
文摘According to the Fick＇s second law of diffusion, six analytical solutions of chloride profile in concrete were studied and discussed with regard to different boundary and initial conditions. In those analytical solutions, the most prevailing error-function solution which is based on semi-infinite assumption is the simple one, but may under-estimate the chloride content in concrete and over-rate the life time prediction of concrete structures. The experimental results show that compared with other solutions, the chloride content in concrete predicted by error-function model is the minimum, and the calculation difference produced by different analytical models should not be ignored. The influence of models on chloride content prediction is more than other environment and material coefficients in some time. In order to get a more realistic prediction model, modification to error-function model is suggested based on analysis and calculation examples concerning the boundary and edge effect.
基金Supported by National Natural Science Foundation of China (Grant No.51175287)National Science and Technology Major Project of China (Grant No.2011ZX02403)
文摘CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs（AAG） is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System（FSMARS）, is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.
基金TheworkwassupportedbytheNationalFoundationofHighPerformanceComputation (No .9810 0 5 )
文摘An optimization mathematical model of the pile forces for piled breasting dolphins in the open sea under various loading conditions is presented. The optimum layout with the well distributed pile forces and the least number of piles is achieved by the multiplier penalty function method. Several engineering cases have been calculated and compared with the result of the conventional design method. It is shown that the number of piles can be reduced at least by 10%～20% and the piles' bearing state is improved greatly.
文摘The paper describes research aimed at developing a configuration system to support theconceptual design of mechanical fasteners. A prototype configuration system has been developedwhich allows designers to interactively configure fastener designs using geometric and functionalicons , freely without regard to physical constraints, with the aim of forming candidate designs.Candidate designs are then passed to the qualitative modeller which uses qualrtative reasoningtechniques to evaluate the configuration. Supporting the above design procedure is a knowledgebase which contains object descriptions of fasteners and fastener features (given in terms ofgeometry, function, performance, material,installation). Design rules (expressing spatial andcasual relationships of fastener features),which are required during the evaluation of candidatefastener configurations, are also contained in the knowledge base.
文摘针对部分机电产品在概念设计阶段未综合考虑客户和环境的需求,进而影响产品详细设计的问题,提出了一种基于功能—结构—客户和环境需求(function‒structure‒requirements of customer and environment,FSRce)模型的机电产品绿色概念设计方案生成方法。首先,从案例库中选择合适的功能和结构对现有产品设计树中的节点进行扩展和关联;同时通过数据挖掘、专家打分等方法获得产品的客户和环境需求重要度,以构建基于FSRce模型的产品概念设计空间。然后,先利用加权区间粗糙数法对客户和环境需求重要度进行分析,得到需求相对重要度,再运用模糊质量功能展开(fuzzy quality function deployment,FQFD)将需求相对重要度转化为产品的工程特性权重。最后,利用物元理论构建基于工程特性的产品物元域和各结构物元集,并结合工程特性权重得到各结构的满意度分值,通过比较满意度优选得到满足客户和环境需求的产品概念设计方案。以某小型工业吹风机为例,基于上述方法对其概念设计方案进行优化。相比于原始方案,优化后的吹风机在能源消耗上降低了15.38%,在碳排放上降低了15.32%,且客户满意度提高了44.66%,由此验证了所提出方法的可行性与有效性。所提出的方法为机电产品概念设计方案的生成提供了一种新思路,能更好地辅助设计人员实现对机电产品的绿色设计。
