Insight of the Structures and Properties on 2-Thioxanthine Complexes with One Hg^(2+)and Two Cl^-Ions:a Theoretical Investigation

The molecular structures of fifteen possible 2-thioxanthine（2TX） complexes with one Hg^2＋ and two Cl-ions were fully optimized using density functional theory B3PW91/6-311＋＋G^＊＊ method. The effective pseudo potential LANL2DZ basis set was used for metal Hg^2＋ion. The vibrational analysis was also carried out at the same level. The bond lengths, bond angles, zero point energies, Gibbs free energies, thermodynamic energies and relative energies of all the complexes were obtained. The NBO analysis for natural charge and the second order perturbation energy values was carried out for three stable complexes and the IR spectroscopy of the two complexes was assigned to the experimental data. The results show that the 2-thioxanthine complexes with one Hg^2＋ and two Cl^-ions were formed and the complexes resulting from the thione tautomer are more stable than that of the thiol ones. The order of three complexes with relative lower energy is 2TX（1,3,7）-Hg^2＋-2, 2 TX（1,3,7）-Hg^2＋-1 and 2 TX（1,3,9）-Hg^2＋. The calculated IR spectroscopy of the two complexes agreed with the experimental data.

Computational Prooving of Riemann’s Hypothesis

Formulated in 1859 by the mathematician Bernhard Riemann, the Riemann hypothesis is a conjecture. She says that the Riemann’s Zeta function non-trivial zeros of all have real part . This demonstration would improve the prime numbers distribution knowledge. This conjecture constitutes one of the most important mathematics unsolved problems of the 21st century: it is one of the famous Hilbert problems proposed in 1900. In this article, a method for solving this conjecture is given. This work has been started by finding an analytical function which gives a best accurate 10-8 of particular zeros sample that this number has increased gradually and finally prooving that this function is always irrational. This demonstration is important as allows Riemann’s zeta function to be a model function in the Dirichlet series theory and be at the crossroads of many other theories. Also, it is going to serve as a motivation and guideline for new studies.

Exact analytic solutions for an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal

Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors （SIFs） for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.

Antiplane response of isosceles triangular hill to incident SH waves

In this paper, antiplane response of an isosceles triangular hill to incident SH waves is studied based on the method of complex function and by using moving coordinate system. The standing wave function, which can satisfy the governing equation and boundary condition, is provided. Furthermore, numerical examples are presented; the influences of wave number and angle of the incident waves and the angle of the hill’s peak on ground motion are discussed.

Scattering of SH waves by a scalene triangular hill

The influence of local landforms on ground motion is an important problem. The antiplane response of a scalene triangular hill to incident SH waves is studied in this paper by using a complex function, moving coordinates and auxiliary functions. First, the model is divided into two domains： a scalene triangular hill with a semi-circular bottom; and a half space with a semi-circular canyon. Wave functions that satisfy the zero-stress condition at the triangular wedges and at the horizontal surface are constructed in both domains. Then, considering the displacement continuity and stress equilibrium, algebraic equations are established. Finally, numerical examples are provided to illustrate the influence of the geometry of the hill and the characteristics of the incident waves on the ground motions.

Two kinds of contact problems in three-dimensional icosahedral quasicrystals

Two kinds of contact problems, i.e., the frictional contact problem and the adhesive contact problem, in three-dimensional （3D） icosahedral quasicrystals are dis- cussed by a complex variable function method. For the frictional contact problem, the contact stress exhibits power singularities at the edge of the contact zone. For the adhe- sive contact problem, the contact stress exhibits oscillatory singularities at the edge of the contact zone. The numerical examples show that for the two kinds of contact problems, the contact stress exhibits singularities, and reaches the maximum value at the edge of the contact zone. The phonon-phason coupling constant has a significant effect on the contact stress intensity, while has little impact on the contact stress distribution regu- lation. The results are consistent with those of the classical elastic materials when the phonon-phason coupling constant is 0. For the adhesive contact problem, the indentation force has positive correlation with the contact displacement, but the phonon-phason cou- pling constant impact is barely perceptible. The validity of the conclusions is verified.

INTEGRAL EQUATION METHOD'S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.

Dynamic stress concentration and scattering of SH-wave by interface elliptic cylindrical cavity

In this paper,the dynamic stress concentration and scattering of SH-waves by bi-material structures that possess an interface elliptic cavity are investigated.First,by using the complex function method,the Green's function is constructed.This yields the solution of the displacement field for an elastic half space with a semi-elliptic canyon impacted by an anti-plane harmonic line source loading on the horizontal surface.Then,the problem is divided into an upper and lower half space along the horizontal interface,regarded as a harmony model.In order to satisfy the integral continuity condition, the unknown anti-plane forces are applied to the interface.The integral equations with unknown forces can be established through the continuity condition,and after transformation,the algebraic equations are solved numerically.Finally,the distribution of the dynamic stress concentration factor(DSCF)around the elliptic cavity is given and the effect of different parameters on DSCF is discussed.

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.

Exact solutions of two semi-infinite collinear cracks in piezoelectric strip

Using the complex variable function method and the conformal mapping technique, the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface. Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable. The results can be reduced to the well-known solutions for a purely elastic material in the absence of an electric load. Moreover, when the distance between the two crack tips tends to infinity, analytic solutions of a semi-infinite crack in a piezoelectric strip can be obtained. Numerical examples are given to show the influence of the loaded crack length, the height of the strip, the distance between the two crack tips, and the applied mechanical/electric loads on the mechanical strain energy release rate. It is shown that the material is easier to fail when the distance between two crack tips becomes shorter, and the mechanical/electric loads have greater influence on the propagation of the left crack than those of the right one.

FRACTURE CALCULATION OF BENDING PLATES BY BOUNDARY COLLOCATION METHOD

Fracture of Kirchhoff plates is analyzed by the theory of complex variables and boundary collocation method. The deflections, moments and shearing forces of the plates are assumed to be the functions of complex variables. The functions can satisfy a series of basic equations and governing conditions, such as the equilibrium equations in the domain, the boundary conditions on the crack surfaces and stress singularity at the crack tips. Thus, it is only necessary to consider the boundary conditions on the external boundaries of the plate, which can be approximately satisfied by the collocation method and least square technique. Different boundary conditions and loading cases of the cracked plates are analyzed and calculated. Compared to other methods, the numerical examples show that the present method has many advantages such as good accuracy and less computer time. This is an effective semi_analytical and semi_numerical method.

Complex-Valued Neural Networks:A Comprehensive Survey

Complex-valued neural networks(CVNNs)have shown their excellent efficiency compared to their real counterparts in speech enhancement,image and signal processing.Researchers throughout the years have made many efforts to improve the learning algorithms and activation functions of CVNNs.Since CVNNs have proven to have better performance in handling the naturally complex-valued data and signals,this area of study will grow and expect the arrival of some effective improvements in the future.Therefore,there exists an obvious reason to provide a comprehensive survey paper that systematically collects and categorizes the advancement of CVNNs.In this paper,we discuss and summarize the recent advances based on their learning algorithms,activation functions,which is the most challenging part of building a CVNN,and applications.Besides,we outline the structure and applications of complex-valued convolutional,residual and recurrent neural networks.Finally,we also present some challenges and future research directions to facilitate the exploration of the ability of CVNNs.

SOLUTION OF DIFFERENT HOLES SHAPE BORDERS OF FIBRE REINFORCED COMPOSITE PLATES BY INTEGRAL EQUATIONS

Accurate boundary conditions of composite material plates with different holes are founded to settle boundary condition problems of complex holes by conformal mapping method upon the nonhomogeneous anisotropic elastic and complex function theory. And then the two stress functions required were founded on Cauchy integral by boundary conditions. The final stress distributions of opening structure and the analytical solution on composite material plate with rectangle hole and wing manholes were achieved. The influences on hole-edge stress concentration factors are discussed under different loads and fiber direction cases, and then contrast calculates are carried through FEM.

Resolution of Grandi’s Paradox as Extended to Complex Valued Functions

Grandi’s paradox, which was posed for a real function of the form 1/(1+ x), has been resolved and extended to complex valued functions. Resolution of this approximately three-hundred-year-old paradox is accomplished by the use of a consistent truncation approach that can be applied to all the series expansions of Grandi-type functions. Furthermore, a new technique for improving the convergence characteristics of power series with alternating signs is introduced. The technique works by successively averaging a series at different orders of truncation. A sound theoretical justification of the successive averaging method is demonstrated by two different series expansions of the function 1/(1+ ex ) . Grandi-type complex valued functions such as 1/(i + x) are expressed as consistently-truncated and convergence-improved forms and Fagnano’s formula is established from the series expansions of these functions. A Grandi-type general complex valued function is introduced and expanded to a consistently truncated and successively averaged series. Finally, an unorthodox application of the successive averaging method to polynomials is presented.

SPACES OF ANALYTIC FUNCTIONS REPRESENTED BY DIRICHLET SERIES OF TWO COMPLEX VARIABLES

We consider the space X of all analytic functionsof two complex variables s1 and s2, equipping it with the natural locally convex topology and using the growth parameter, the order of f as defined recently by the authors. Under this topology X becomes a Frechet space Apart from finding the characterization of continuous linear functionals, linear transformation on X, we have obtained the necessary and sufficient conditions for a double sequence in X to be a proper bases.

Synthesis, Crystal Structure of [(MeC_5H_4)_2Ln(μ-OCH_2CH_2NMe_2)]_2 (Ln=Sm, Y, Nd) and Their Catalytic Activity for Ring-Opening Polymerization of ε-Caprolactone

Reaction of (MeC 5H 4) 3Ln with HOCH 2CH 2NMe 2 in tetrahydrofuran(THF) gives the new complexes [(MeC 5H 4) 2Ln(μ OCH 2CH 2NMe 2)] 2 (Ln=Sm, Y, Nd) with nitrogen functionalized μ alkoxide ligand. The complexes were characterized by elemental analysis and IR, and [(MeC 5H 4) 2Sm(μ OCH 2CH 2NMe 2)] 2 was structurally characterized by the X ray diffraction to be a dimer formed by two unsymmetric oxygen bridges. The complex has a tricyclic skeleton with the additional two Sm-N bonds via intramolecular coordination of OCH 2CH 2NMe 2. The coordination number of the central metal Sm is nine. The title complexes show good catalytic activity for ring opening polymerization of ε caprolactone.

INFLUENCE OF COUPLE-STRESSES ON STRESS CONCENTRATIONS AROUND THE CAVITY

The complex function method was used in the solution of micropolar elasticity theory around cavity in an infinite elasticity plane. In complex plane, the general solution of two dimension micropolar elasticity theory is given. The solution comes from analytic function and 'Zonal Function'. The boundary conditions of non-circular cavity are satisfied by using the conformal mapping method. Based on the method, a general approach solving the stress concentration in micropolar elasticity theory is established. Finally, the numerical calculation is carried out to the stress concentration coefficient of circular cavity.

PROBLEMS OF COLLINEAR CRACKS BETWEEN BONDED DISSIMILAR MATERIALS UNDER ANTIPLANE CONCENTRATED FORCES

In this paper problems of collinear cracks between bonded dissimilar materials under antiplane concentrated forces are dealt with. General solutions of the problems are formulated by applying extended Schwarz principle integrated with the analysis of the singularity of complex stress functions. Closed-form solutions of several typical problems are obtained and the stress intensity factors are given. These solutions include a series of original results and some results of previous researches. It is found that under symmetrical loads the solutions for the dissimilar materials are the same as those for the homogeneous materia[7]

DYNAMIC PROPAGATION PROBLEM ON DUGDALE MODEL OF MODE Ⅲ INTERFACE CRACK

By the theory of complex functions, the dynamic propagation problem on Dugdale model of mode Ⅲ interface crack for nonlinear characters of materials was studied. The general expressions of analytical solutions are obtained by the methods of self-similar functions. The problems dealt with can be easily transformed into Riemann-Hilbert problems and their closed solutions are attained rather simply by this approach. After those solutions were utilized by superposition theorem, the solutions of arbitrarily complex problems could be obtained.

Scattering of SH-waves on triangular hill joined bysemi-cylindrical canyon

Scattering of SH-waves on the triangular hill joined by semi-cylindrical canyon in half-space is studied using the method of complex function and moving coordinates. The model being studied is divided into two domains. The wave functions satisfying the required condition at each wedge are constructed in each equation. The equations are solved with Fourier expansion. Numerical results are provided to discuss the influence of scattering of SH-waves.