Dynamic stability analysis of porous functionally graded beams under hygro-thermal loading using nonlocal strain gradient integral model

We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law model.Unlike most studies on this topic,we consider both the bending deformation of the beams and the hygro-thermal load as size-dependent,simultaneously,by adopting the equivalent differential forms of the well-posed nonlocal strain gradient integral theory(NSGIT)which are strictly equipped with a set of constitutive boundary conditions(CBCs),and through which both the stiffness-hardening and stiffness-softening effects of the structures can be observed with the length-scale parameters changed.All the variables presented in the differential problem formulation are discretized.The numerical solution of the dynamic instability region(DIR)of various bounded beams is then developed via the generalized differential quadrature method(GDQM).After verifying the present formulation and results,we examine the effects of different parameters such as the nonlocal/gradient length-scale parameters,the static force factor,the functionally graded(FG)parameter,and the porosity parameter on the DIR.Furthermore,the influence of considering the size-dependent hygro-thermal load is also presented.

Unified two-phase nonlocal formulation for vibration of functionally graded beams resting on nonlocal viscoelastic Winkler-Pasternak foundation

A nonlocal study of the vibration responses of functionally graded(FG)beams supported by a viscoelastic Winkler-Pasternak foundation is presented.The damping responses of both the Winkler and Pasternak layers of the foundation are considered in the formulation,which were not considered in most literature on this subject,and the bending deformation of the beams and the elastic and damping responses of the foundation as nonlocal by uniting the equivalently differential formulation of well-posed strain-driven(ε-D)and stress-driven(σ-D)two-phase local/nonlocal integral models with constitutive constraints are comprehensively considered,which can address both the stiffness softening and toughing effects due to scale reduction.The generalized differential quadrature method(GDQM)is used to solve the complex eigenvalue problem.After verifying the solution procedure,a series of benchmark results for the vibration frequency of different bounded FG beams supported by the foundation are obtained.Subsequently,the effects of the nonlocality of the foundation on the undamped/damping vibration frequency of the beams are examined.

Thermal-induced snap-through buckling of simply-supported functionally graded beams

The instability of functionally graded material(FGM)structures is one of the major threats to their service safety in engineering applications.This paper aims to clarify a long-standing controversy on the thermal instability type of simply-supported FGM beams.First,based on the Euler-Bernoulli beam theory and von K′arm′an geometric nonlinearity,a nonlinear governing equation of simply-supported FGM beams under uniform thermal loads by Zhang’s two-variable method is formulated.Second,an approximate analytic solution to the nonlinear integro-differential boundary value problem under a thermal-induced inhomogeneous force boundary condition is obtained by using a semiinverse method when the coordinate axis is relocated to the bending axis(physical neutral plane),and then the analytical predictions are verified by the differential quadrature method(DQM).Finally,based on the free energy theorem,it is revealed that the symmetry breaking caused by the material inhomogeneity can make the simply-supported FGM beam under uniform thermal loads occur snap-through postbuckling only in odd modes;furthermore,the nonlinear critical load of thermal buckling varies non-monotonically with the functional gradient index due to the stretching-bending coupling effect.These results are expected to provide new ideas and references for the design and regulation of FGM structures.

Large deflection of flexible tapered functionally graded beam

In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear equations governing the non-linear deformation,a curvilinear coordinate system is introduced.A general non-linear second order differential equation that governs the shape of a deflected beam is derived based on the geometric nonlinearities,infinitesimal local displacements and local rotation concepts with remarkable physical properties of functionally graded materials.The solutions obtained from semi-analytical methods are numerically compared with the existing elliptic integral solution for the case of a flexible uniform cantilever functionally graded beam.The effects of taper ratio,inclined end load angle and material property gradient on large deflection of the beam are evaluated.The Adomian decomposition method will be useful toward the design of tapered functionally graded compliant mechanisms driven by smart actuators.

Bending and free vibrational analysis of bi-directional functionally graded beams with circular cross-section

The bending and free vibrational behaviors of functionally graded(FG)cylindrical beams with radially and axially varying material inhomogeneities are investigated.Based on a high-order cylindrical beam model,where the shear deformation and rotary inertia are both considered,the two coupled governing differential motion equations for the deflection and rotation are established.The analytical bending solutions for various boundary conditions are derived.In the vibrational analysis of FG cylindrical beams,the two governing equations are firstly changed to a single equation by means of an auxiliary function,and then the vibration mode is expanded into shifted Chebyshev polynomials.Numerical examples are given to investigate the effects of the material gradient indices on the deflections,the stress distributions,and the eigenfrequencies of the cylindrical beams,respectively.By comparing the obtained numerical results with those obtained by the three-dimensional(3D)elasticity theory and the Timoshenko beam theory,the effectiveness of the present approach is verified.

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent years.Bamboo fibers are renowned for their good mechanical properties,abundance,and short cycle growth.As beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic foundation.Three different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the thickness.The elastic properties of the composite are determined with the law of mixture.Employing Hamilton’s principle,the governing equations of motion are obtained.The generalized differential quadrature method(GDQM)is then applied to the equations to obtain the results.The achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam change.Furthermore,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber distribution.Eventually,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

Cross-sectional warping and precision of the first-order shear deformation theory for vibrations of transversely functionally graded curved beams

The warping may become an important factor for the precise transverse vibrations of curved beams.Thus,the first aim of this study is to specify the structural design parameters where the influence of cross-sectional warping becomes great and the first-order shear deformation theory lacks the precision necessary.The outof-plane vibrations of the first-order shear deformation theory are compared with the warping-included vibrations as the curvature and/or thickness increase for symmetric and asymmetric transversely-functionally graded(TFG)curved beams.The second aim is to determine the influence of design parameters on the vibrations.The circular/exact elliptical beams are formed via curved mixed finite elements(MFEs)based on the exact curvature and length.The stress-free conditions are satisfied on three-dimensional(3D)constitutive equations.The variation of functionally graded(FG)material constituents is considered based on the power-law dependence.The cross-sectional warping deformations are defined over a displacement-type FE formulation.The warping-included MFEs(W-MFEs)provide satisfactory 3D structural characteristics with smaller degrees of freedom(DOFs)compared with the brick FEs.The Newmark method is used for the forced vibrations.

Direct Multiscale Analysis of Stability of an Axially Moving Functionally Graded Beam with Time-Dependent Velocity

In this study,the transverse vibration of a traveling beam made of functionally graded material was analyzed.The material gradation was assumed to vary continuously along the thickness direction of the beam in the form of power law exponent.The effect of the longitudinally varying tension due to axial acceleration was highlighted,and the dependence of the tension on the finite support rigidity was also considered.A complex governing equation of the functionally graded beam was derived by the Hamilton principle,in which the geometric nonlinearity,material properties and axial load were incorporated.The direct multiscale method was applied to the analysis process of an axially moving functionally graded beam with timedependent velocity,and the natural frequency and solvability conditions were obtained.Based on the conditions,the stability boundaries of subharmonic resonance and combination resonance were obtained.It was found that the dynamic behavior of axial moving beams could be tuned by using the distribution law of the functional gradient parameters.

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material （FGM） beams is studied based on the Levinson beam theory （LBT）. Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.

Homogenized and classical expressions for static bending solutions for functionally graded material Levinson beams

The exact relationship between the bending solutions of functionally graded material （FGM） beams based on the Levinson beam theory and those of the correspond- ing homogenous beams based on the classical beam theory is presented for the material properties of the FGM beams changing continuously in the thickness direction. The de- flection, the rotational angle, the bending moment, and the shear force of FGM Levinson beams （FGMLBs） are given analytically in terms of the deflection of the reference ho- mogenous Euler-Bernoulli beams （HEBBs） with the same loading, geometry, and end supports. Consequently, the solution of the bending of non-homogenous Levinson beams can be simplified to the calculation of transition coefficients, which can be easily deter- mined by variation of the gradient of material properties and the geometry of beams. This is because the classical beam theory solutions of homogenous beams can be eas- ily determined or are available in the textbook of material strength under a variety of boundary conditions. As examples, for different end constraints, particular solutions are given for the FGMLBs under specified loadings to illustrate validity of this approach. These analytical solutions can be used as benchmarks to check numerical results in the investigation of static bending of FGM beams based on higher-order shear deformation theories.

High Heat Flux Testing of B_4C/Cu and SiC/Cu Functionally Graded Materials Simulated by Laser and Electron Beam

B4C, SiC and C, Cu functionally graded-materials (FGMs) have been developed by plasma spraying and hot pressing. Their high-heat flux properties have been investigated by high energy laser and electron beam for the simulation of plasma disruption process of the future fusion reactors, And a study on eroded products of B4C/Cu FGM under transient thermal load of electron beam was performed. In the experiment, SEM and EDS analysis indicated that B4C and SiC were decomposed, carbon was preferentially evaporated under high thermal load, and a part of Si and Cu were melted, in addition, the splash of melted metal and the particle emission of brittle destruction were also found. Different erosive behaviors of carbon-based materials (CBMs) caused by laser and electron beam were also discussed.

Buckling analysis of functionally graded nanobeams under non-uniform temperature using stress-driven nonlocal elasticity

In this work,the size-dependent buckling of functionally graded(FG)Bernoulli-Euler beams under non-uniform temperature is analyzed based on the stressdriven nonlocal elasticity and nonlocal heat conduction.By utilizing the variational principle of virtual work,the governing equations and the associated standard boundary conditions are systematically extracted,and the thermal effect,equivalent to the induced thermal load,is explicitly assessed by using the nonlocal heat conduction law.The stressdriven constitutive integral equation is equivalently transformed into a differential form with two non-standard constitutive boundary conditions.By employing the eigenvalue method,the critical buckling loads of the beams with different boundary conditions are obtained.The numerically predicted results reveal that the growth of the nonlocal parameter leads to a consistently strengthening effect on the dimensionless critical buckling loads for all boundary cases.Additionally,the effects of the influential factors pertinent to the nonlocal heat conduction on the buckling behavior are carefully examined.

Geometrically Nonlinear Bending Analysis of Metal-Ceramic Composite Beams under Thermomechanical Loading

A new method is developed to derive equilibrium equations of Metal-Ceramic beams based on first order shear deformation plate theory which is named first order shear deformation beam theory2(FSDBT2). Equilibrium equations obtained from conventional method (FSDBT1) is compared with FSDBT2 and the case of cylindrical bending of Metal-Ceramic composite plates for non-linear thermomechanical deformations and various loadings and boundary conditions. These equations are solved by using three different methods (analytical, perturbation technique and finite element solution). The through-thickness variation of the volume fraction of the ceramic phase in a Metal-Ceramic beam is assumed to be given by a power-law type function. The non-linear strain-displacement relations in the von-Kármán sense are used to study the effect of geometric non-linearity. Also, four other representative averaging estimation methods, the linear rule, Mori-Tanaka, Self-Consistent and Wakashima-Tsukamoto schemes, by comparing with the power-law type function are also investigated. Temperature distribution through the thickness of the beams in thermal loadings is obtained by solving the one-dimensional heat transfer equation. Finally it is concluded that for Metal-Ceramic composites, these two theories result in identical static responses. Also the displacement field and equilibrium equations in the case of cylindrical bending of Metal-Ceramic plates are the same as those supposed in FSDBT2.

On well-posedness of two-phase nonlocal integral models for higher-order refined shear deformation beams

Due to the conflict between equilibrium and constitutive requirements,Eringen’s strain-driven nonlocal integral model is not applicable to nanostructures of engineering interest.As an alternative,the stress-driven model has been recently developed.In this paper,for higher-order shear deformation beams,the ill-posed issue(i.e.,excessive mandatory boundary conditions(BCs)cannot be met simultaneously)exists not only in strain-driven nonlocal models but also in stress-driven ones.The well-posedness of both the strain-and stress-driven two-phase nonlocal(TPN-Strain D and TPN-Stress D)models is pertinently evidenced by formulating the static bending of curved beams made of functionally graded(FG)materials.The two-phase nonlocal integral constitutive relation is equivalent to a differential law equipped with two restriction conditions.By using the generalized differential quadrature method(GDQM),the coupling governing equations are solved numerically.The results show that the two-phase models can predict consistent scale-effects under different supported and loading conditions.

Buckling Analysis of Axially Functionally Graded and Non-Uniform Beams Based on Timoshenko Theory

In this paper,the buckling behaviors of axially functionally graded and non-uniform Timoshenko beams were investigated.Based on the auxiliary function and power series,the coupled governing equations were converted into a system of linear algebraic equations.With various end conditions,the characteristic polynomial equations in the buckling loads were obtained for axially inhomogeneous beams.The lower and higher-order eigenvalues were calculated simultaneously from the multi-roots due to the fact that the derived characteristic equation was a polynomial one.The computed results were in good agreement with those analytical and numerical ones in literature.

A Supersonic Aerodynamic Energy Harvester:A Functionally Graded Material Beam with a Giant Magnetostrictive Thin Film

In this study,a simply supported functionally graded material beam with a giant magnetostrictive thin film(GMF)was selected as an energy harvester.Based on the theory of large deformation and the Villari effect of GMF,piston theory was used to simulate the dynamic equation of the whole structure under supersonic aerodynamic pressure and in a thermal environment by using Hamilton^principle,and the energy harvesting effect of GMF was simulated by using a Runge-Kutta algorithm.Below the critical flutter velocity,the maximum voltage output and energy harvesting results were discussed as they were affected by external factors such as the geometric model of structure parameters,slenderness ratio,gradient index,number of turns of an electromagnetic coil,airflow velocity,and temperature.The electromechanical coupling coefficient/C33 was 71%.The results show that this proposed harvester can achieve an optimal harvesting effect by adjusting the parameters appropriately,and collect energy in thermal and supersonic environments using the GMF,which provides power to sensors of the health monitoring system of the aircraft’s own structure.