Experimental measurement and numerical analysis of fused taper shape for optical fiber coupler

To find out the effect of the shape of fused taper region on the optical fiber coupler, the fiber couplers were fabricated at different drawing speeds with a six-axes fiber coupler machine. The results, which were obtained fi＇om the shape of fused taper region measured with microscope, show that there is a close correlation between the cone angle and optical performance of fiber coupler. High-performance fiber coupler cannot be obtained until rheological shape is controlled accurately. The numerical analysis model, which was built based on generalized Maxwell viscoelastic theory, is resolved with ANSYS software. The calculated results accord with the experimental data. It can apply a theoretic basis for forecasting the shape of fiber coupler fabricated under the conditions of different technological parameters.

All-fibre micro-ring resonator based on tapered microfibre

In this paper, bendloss characteristics of an optical fibre are investigated in detail, and the results show that the resonator with a smaller ring radius, wider free spectrum range （FSR）, higher fineness （f） and quality-factor （Q） can be achieved by using microfibres. Based on the improved fused taper technique, a high-quality microfibre with 5 ttm radius has been fabricated, and an all-fibre micro-ring resonator with a radius of only 500μm is realized using self-coiling coupling method. The good-resonant characteristic makes the all-fibre device be expected to avoid bendloss and connection loss associated with planar waveguide integration.

High-frequency fused high-voltage arc tapering process power supply for of fiber

The performance of the optical fiber coupler prepared with fused biconical taper method is determined by the quality of fused stretching. Besides, the stable high-temperature heat source is the essential guarantee for fused stretching process to go smoothly. The way of using AC （alternating current） arc as the heat source is proposed in this article. In addition, the paper also introduces high-frequency high-voltage power supply with the characteristics of constant current and restricted voltage, which is composed of preceding voltage regulation part and following inverter.

Surface-enhanced Raman scattering sensor based on fused biconical taper zone of optical fiber

In this paper, a novel surface-enhanced Raman scattering （SERS） sensor combined with fused biconical taper fiber （FBTF） and film coated with silver sols is proposed. This structure is designed to significantly increase the SERS active surface when the length of the taper is increased and the radius is reduced, since the penetration depth is inversely proportional to the taper radius and proportional to the taper length according to the fiber-optic evanescent-wave theory. Based on the SERS sensing principle, the feasibility of FBTF sensor is analyzed in this paper. As a result, the Raman spectrum of R6G is obtained from the fused biconical taper zone surface coating with the silver sols in our experiments. The detected concentration is up to 10-7mol/L.

Relationship between rheological manufacturing process and optical performance of optical fiber coupler

Through theoretical analysis and experiments, the viscoelastic mechanical model of optical fiber coupler in the process of fused biconical taper was established, and the numerical analysis in non-uniform temperature field was made. The results show that the rheological parameters, such as drawing speed and fused temperature, have a tremendous influence on stress distribution and performance of optical fiber coupler, especially the influence of fused temperature. The change of fused temperature by 5℃ can lead to the change of the maximum stress by 30% and stress difference by 20% in the same cross section. The change of temperature gradient by 3% can result in the change of stress difference by 90%. In the present condition of rheological technology, rheological defects such as crystallizations and microcracks are easy to generate in the optical fiber coupler.

Structure analysis of optical fiber coupler with infrared spectrometry

To obtain excellent performance optical fiber couplers, the structural difference of SiO2 in couplers with different manufacturing techniques was investigated. With 740-FT-IR infrared spectrometric analyzer, the infrared absorption spectrum of SiO2 in couplers at different drawing velocities was measured, and two characteristic peaks in the wavenumber range of 6502000 cm-1 were observed. One characteristic peak is at about 943 cm-1, which is （attributed） to Si—O—Si bond asymmetric stretching vibration, the other is at about 773 cm-1, which is attributed to （Si—O—Si） bond symmetric stretching vibration. From the infrared spectrum, it is found that the intensity and wavenumber of the characteristic peaks are related to the manufacturing technique of couplers. The characteristic peak at （about） 943 cm-1 becomes steeper when increasing the drawing velocity. At the drawing velocity of 150 μm/s, the distance between the two characteristic peaks is maximum, and then the optical fiber coupler has excellent performance, indicating that the performance of the optical fiber coupler has a close relationship with the wavenumber of the two characteristic peaks.

Effect of technological parameters on optical performance of fiber coupler

To find out the influence of technological parameters on optical performance of fused optical fiber device, the fiber coupler was served as subject investigated by using the fused biconical taper machining as experimental setup. Fused fiber coupler's optical performances such as insertion loss, excess loss, directivity and uniformity were tested with the optical test system that was constituted of tunable laser and optical spectrum analyzer. Especially the relationship between optical performance and drawing speed was investigated. The experimental results show that the optical performance is closely related to process conditions. At fused temperature of 1 200 ℃, there exists a drawing speed of 150 μms, which makes the device's performance optimum. Out of this speed region, the optical performance drops quickly. At drawing speed of 200 μms, the excess loss is relatively small when the fused temperature is above 1 200 ℃. So the technological parameters have close relationship with optical performance of the coupler, and the good performance coupler can't get until the drawing speed and fused temperature match accurately.

Tunable and wavelength interval precisely controlled erbium-doped fiber laser by employing the fused taper technology

A tunable multi-wavelength erbium-doped fiber laser with precise wavelength interval control is reported theoretically and experimentally in this paper.It is made up of a Mach-Zehnder interferometer [MZI] filter and a Sagnac filter and supplemerited by the four-wave-mixing effect.Compared with other filters,the proposed MZI filter based on the fused taper technology can change the wavelength interval more flexibly.The experiment result shows that wavelength tuning can be achieved,and the tuning range can reach-15 nm.Moreover,the variation in the number of wavelengths is also realized.The maximum side-mode suppression ratio can reach 39 dB.

Novel Fused Taper 1x4 Star Coupler for Full-Band Operation

A novel fused taper 1×4 coupler for full-band operation is proposed. Wavelength flattened characteristics and excellent branching uniformity less than 0.4 dB have been achieved in wavelength range from 1200 nm to 1700 nm.

Effect of Scanning Beam Profile to Fabricate Fused Fiber Tapers by CO_2 Laser Irradiation Method

Beam uniformity is a crucial building block of CO2 experiments aimed at fusing and stretching optical fibers in a lossless manner. When the irradiation beam is expanded through a galvanometer mirror, ways to achieve beam uniformity are investigated.