Optimal fuzzy PID controller with adjustable factors based on flexible polyhedron search algorithm

A new kind of optimal fuzzy PID controller is proposed, which contains two parts. One is an on line fuzzy inference system, and the other is a conventional PID controller. In the fuzzy inference system, three adjustable factors x p, x i , and x d are introduced. Their functions are to further modify and optimize the result of the fuzzy inference so as to make the controller have the optimal control effect on a given object. The optimal values of these adjustable factors are determined based on the ITAE criterion and the Nelder and Mead′s flexible polyhedron search algorithm. This optimal fuzzy PID controller has been used to control the executive motor of the intelligent artificial leg designed by the authors. The result of computer simulation indicates that this controller is very effective and can be widely used to control different kinds of objects and processes.

An Improved Non-isolated LED Converter with Power Factor Correction and Average Current Mode Control

A new type of high power LED drivers is proposed by adopting an improved two-stages non-isolated configuration. In order to improve power factor and achieve accurate average current control under universal input voltages ranging from 100 Vrms to 240 Vrms, the power factor correction and average current mode control methods operating in continuous current conduction mode are designed and implemented. With the LUMILEDS emitter type LEDs, a laboratory prototype is built and measured. And from the measured results, it could be concluded that the proposed driver has many better performances such as high power factor, low current harmonic, accurate average current control and switch protection.

Accurate Reactive Power Controller and Power Factor Correction Using Fuzzy Logic

This paper presents the use of fuzzy logic technique to control the reactive power of load and hence improve the source power factor. A shunt compensator is proposed, which consists of a voltage controlled reactor by full-wave thyristor bridge in parallel with a capacitor. The proposed voltage control technique composed of two independent fuzzy controllers, primary and secondary. The PFC （primary fuzzy controller） is designed based on linearization method to introduce to the network the nearest value of reactive power （VAR） required to correct the power factor. The SFC （secondary fuzzy controller） is designed to achieve accurate compensation for the required VAR to achieve the pre-set power factor value. Simulations for 15 different practical study cases are presented to evaluate the performance of the controller, and the results show how the designed controller is fast and accurate. Harmonics analyses are carried out up to the 13th harmonic to determine the requirement of harmonics filter.

APPLICATION OF FUZZY CONTROL METHOD WITH SELF-TUNING FACTOR IN JIGGER'S DISCHARGING

Adopting the strategy of fuzzy control with self tuning factor within whole universe of discourse, a kind of fuzzy control method for jigger discharging is put forward. This method has many advantages over the conventional PID controller in terms of response speed, stability and robustness. It is effective to restrain the jig bed from over thick or empty, and the stability of the bed is markedly improved. The good results are obtained in factory tests.

New Asymmetric Fuzzy PID Control for Pneumatic Position Control System

A fuzzy control algorithm of asymmetric fuzzy strategy is introduced for a servo-pneumatic position system. It can effectively solve the difficult problems of single rod low friction cylinders, which are mainly caused by asymmetric structures and different friction characteristics in two directions. On the basis of this algorithm, a traditional PID control is used to improve dynamic performance. Furthermore, a new asymmetric fuzzy PID control with α factor is advanced to improve the self-adaptability and robustness of the system. Both the theoretical analyses and experimental results prove that, with this control strategy, the dynamic performance of the system can be greatly improved. The system using this control algorithm has strong robustness and it obtains desired overshoot and repeatability in both transient and steady-state responses.

A Novel Evolutionary-Fuzzy Control Algorithm for Complex Systems

This paper presents an adaptive fuzzy control scheme based on modified genetic algorithm. In the control scheme, genetic algorithm is used to optimze the nonlinear quantization functions of the controller and some key parameters of the adaptive control algorithm. Simulation results show that this control scheme has satisfactory performance in MIMO systems, chaotic systems and delay systems.

Calculation of impact factor of vibrator oscillation in offset printing based on fuzzy controller and genetic algorithm

In the inking system of an offset printing press,a vibrator roller distributes ink not only in the circumferential direction but also in the axial direction.In the control process,if ink amount is determined only by the dot area coverage without considering the impact of vibrator roller's oscillation,the printing colour quality will be reduced.This paper describes a method of calculating the impact factor of vibrator roller' s oscillation.First,the oscillation performance is analyzed and sample data of impact factor is got.Then,a fuzzy controller used for the calculation of the impact factor is designed,and genetic algorithm is used to optimize membership functions and obtain the fuzzy control rules automatically.This fuzzy controller can be used to calculate impact factors for any printing condition,and the impact factors can be used for ink amount control in printing process and it is important for higher printing colour quality and lowering ink and paper waste.

Model Predictive Yaw Control Using Fuzzy-Deduced Weighting Factor for Large-Scale Wind Turbines

Yaw control system plays an important role in helping large-scale horizontal wind turbines capture the wind energy.To track the stochastic and fast-changing wind direction,the nacelle is rotated by the yaw control system.Therein,a difficulty consists in the variation speed of the wind direction much faster than the rotation speed of the nacelle.To deal with this difficulty,model predictive control has been recently proposed in the literature,in which the previewed wind direction is employed into the predictive model,and the estimated captured energy and yaw actuator usage are two contradictive objectives.Since the performance of the model predictive control strat-egy relies largely on the weighting factor that is designed to balance the two objectives,the weighting factor should be carefully selected.In this study,a fuzzy-deduced scheme is proposed to derive the weighting factor of the mod-el predictive yaw control.For the proposed fuzzy-deduced strategy,the variation degree and the increment of the wind direction during the predictive horizon are used as the inputs,and the weighting factor is the output,which is dynamically adjusted.The proposed model predictive yaw control is demonstrated by some simulations using real wind data and its performance is compared with the conventional model predictive control with thefixed weighting factor.Comparison results confirm the outweighing performance of the proposed control strategy over the conventional one.

Power Factor Correction Rectifier with a Variable Frequency Voltage Source in Vehicular Application

This paper presents a PFCVF (Power Factor Correction) rectifier that uses a variable frequency source for alternators for electric and hybrid vehicles application. In such application, the frequency of the signal in the alternator changes according to the vehicle speed, more over the loading effect on the alternator introduces harmonic currents and increases the alternator apparent power requirements. To overcome these problems and aiming more stability and better design of the alternator, a new third harmonic injection technique is proposed. This technique allows to preserve a good THD (Total Harmonic Distortion) of the input source at any frequency and to decrease losses in semiconductors switches, thereby allowing more stability and reducing the apparent power requirements. A comparative study between the standard and the new technique is made and highlights the effectiveness of the new design. A detailed analysis of the proposed topology is presented and simulations as well as experimental results are shown.

Fuzzy logic control strategy for submerged arc automatic welding of digital controlling

A microcomputer control system based on 80C320 and a switching regulation of wire feeder were designed. A correction factor based double model fuzzy logic controller （FLC） was introduced to achieve welding digital and intellectualized control by means of wire feeding speed feedback. The controller has many functions such as keyboard input, light emitting diode （LED） display and real-time intellectualized control of welding process etc. The controlling performance influenced by the coefficient of correction function was discussed. It was concluded by the experiments the relation between the coefficient of correction function and welding quality, when the coefficient of correction function is great, the dynamic character of controller is better, when the coefficient of correction function is small, the sensitivity character of controller is better. Experimental results also show that digital and fuzzy logic control method enable the improvement of appearance of weld and stability of welding process to be achieved in submerged arc automatic welding.

ACS algorithm-based adaptive fuzzy PID controller and its application to CIP-I intelligent leg

Based on the ant colony system （ACS） algorithm and fuzzy logic control, a new design method for optimal fuzzy PID controller was proposed. In this method, the ACS algorithm was used to optimize the input/output scaling factors of fuzzy PID controller to generate the optimal fuzzy control rules and optimal real-time control action on a given controlled object. The designed controller, called the Fuzzy-ACS PID controller, was used to control the CIP-Ⅰ intelligent leg. The simulation experiments demonstrate that this controller has good control performance. Compared with other three optimal PID controllers designed respectively by using the differential evolution algorithm, the real-coded genetic algorithm, and the simulated annealing, it was verified that the Fuzzy-ACS PID controller has better control performance. Furthermore, the simulation results also verify that the proposed ACS algorithm has quick convergence speed, small solution variation, good dynamic convergence behavior, and high computation efficiency in searching for the optimal input/output scaling factors.

A double closed loop APFC control with feed-forward

In order to improve the steady state performance,dynamic response and power factor of traditional power factor correction(PFC)digital control method and reduce the harmonic distortion of input current,a double closed loop active power factorcorrection(APFC)control method with feed-forward is proposed.Firstly,the small signal model of Boost PFC control systemis built and the system transfer function is deduced,and then the parameters of the main device with Boost topology is estimated.By means of the feed-forward,the system can quickly respond to the change in input voltage.Furthermore,the use ofvoltage loop and current loop can achieve input current and output voltage regulation Simulink modeling shows that this methodcan effectively control the output voltage in case of input voltage largely fluctuating,improve the system dynamic response abilityand input power factor,and reduce the input current harmonic distortion

New DCM Operated Single Phase Bridgeless Cuk Derived Converters for Power Factor Correction

This paper presents a power factor corrected (PFC) new bridgeless (BL) Cuk Topologies for low power applications. A BL configuration of Cuk converter is proposed which eliminates the usage of diode bridge rectifier at the front end of the PFC converter, thus reducing the switching and conduction losses coupled with it. This new BL Cuk converter has two semiconductors switches. The current flow during each switching cycle interval of the converter reduces the conduction losses compared to the conventional Cuk PFC converter. It also reduces the input current ripple and Electromagnetic Interference (EMI). The inrush current during the starting period is limited and the input, output currents of the converter are continuous with minimum current ripple. Hence it is preferred mostly compared to other PFC circuits. The proposed topology works in the Discontinuous Conduction Mode (DCM) with simple control circuitry to achieve almost a unity power factor with less distortion in the input AC current. The switching of the power switches is done under zero current. The proposed PFC topologies are theoretically investigated and performance comparisons are made with the conventional rectifiers. The proposed PFC converter is simulated in MATLAB/SIMULINK with Fuzzy Logic Controller (FLC) and results are demonstrated to evaluate the effectiveness of the controller.

自调整比例因子Fuzzy-P控制在焊缝跟踪中的应用

介绍了自调整比例因子Ｆｕｚｚｙ—Ｐ控制理论及其在非接触超声传感焊缝跟踪系统中的应用。试验表明，该系统具有良好的控制特性，能满足焊接工程应用的要求。

一种改进Fuzzy-PID技术的飞行器姿态控制系统设计

为了克服飞行器模型不精确以及在飞行过程中各种随机因素带来的干扰,提高飞行器姿态控制精度和稳定性能,提出了一种改进的Fuzzy-PID技术飞行器姿态控制系统,并进行数学仿真。根据姿态角大小决定采用Fuzzy控制或PID控制。同时,在Fuzzy控制器中引入自动修正因子n对模糊控制器的参数进行在线修改,增强参数在线自调整能力。实验仿真结果表明该方法能够迅速减小姿态角偏差,改善系统的动态响应特性,提高飞行器自适应能力。

基于自调整因子 Fuzzy 规则的专家控制器

针对传统控制理论的不足，介绍一种基于自调整因子Ｆｕｚｚｙ规则的专家控制器。通过仿真和在应力冻结箱控制中实时运行，取得了满意的效果。

基于Fuzzy-PID算法的电子装配设备温控策略研究

运用模糊控制理论与PID算法合成了模糊自校正PID控制器,该控制器既具有模糊控制灵活性、适应性强的优点,又具有PID控制器精度高的特点。将其成功应用于一类电子装配设备的温控系统中,实现了对PID参数的实时在线修正,在控制稳定性方面获得了比常规PID控制更好的调温效果。应用基于MODBUS协议的单片机加触摸屏的主从式控制方案组建结构简单、性能稳定的系统,在此平台上实验验证了Fuzzy-PID温控策略的可实施性。

焊缝跟踪系统中的自调整比例因子Fuzzy-P控制器的研究

本文介绍了自调整比例因子Ｆｕｚｚｙ－Ｐ控制理论，及非接触超声传感焊缝跟踪的原理．在理论分析和试验的基础上，确定焊缝跟踪系统的模糊控制规则，研制出焊缝跟踪系统中的自调整比例因子Ｆｕｚｚｙ－Ｐ控制器，并设计了控制器的硬件及软件．实验证明，该控制器提高了焊缝跟踪系统的响应速度和跟踪精度。