Design and simulation about a self-Tuning fuzzy-PID controller

Fuzzy logic has attracted the attention of structural control engineers during the last few years,because fuzzy logic can handle nonlinearities,uncertainties,and heuristic knowledge effectively and easily.In this paper,a self-Tuning fuzzy-PID control method which used the technology of the fuzzy control and PID control unified is presented.These techniques can visualize the results and processes for structure stress.These techniques will also provide convenience for engineers and users,and have high practical values.The MATLAB simulation result shows that the system precision and the efficiency are very high and the static error is small,and robustness was also validated.

Fuzzy self-tuning PID control of the operation temperatures in a two-staged membrane separation process

A two-staged membrane separation process for hydrogen recovery from refinery gases is introduced. The principle of the gas membrane separation process and the influence of the operation temperatures are analyzed. As the conventional PID controller is difficult to make the operation temperatures steady, a fuzzy self-tuning PID control algorithm is proposed. The application shows that the algorithm is effective, the operation temperatures of both stages can be controlled steadily, and the operation flexibility and adaptability of the hydrogen recovery unit are enhanced with safety. This study lays a foundation to optimize the control of the membrane separation process and thus ensure the membrane performance.

Self-adaptive PID controller of microwave drying rotary device tuning on-line by genetic algorithms

The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.

Stabilization of CSTR w ith Self-tuning Sliding Mode Controller Using T-S Fuzzy Linearization

A self-tuning reaching law based sliding mode control(SMC)theory is proposed to stabilize the nonlinear continuous stirred tank reactor(CSTR).T-S fuzzy logic is used to build a global fuzzy state-space linear model.Combing the traits of SMC and CSTR,three fuzzy rules can meet the requirements of controlled system.The self-tuning switch control law which can drive the state variables to the sliding surface as soon as possible is designed to ensure the robustness of uncertain fuzzy system.Lyapunov equation is applied to proving the stability of the sliding surface.The simulations show that the proposed approach can achieve desired performance with less chattering problem.

A Design of a PID Self-Tuning Controller Using LabVIEW

In this paper a trial has been made to design a simple self-tuning LabVIEW-based PID controller. The controller uses an open-loop relay test, calculates the tuned parameters in an open loop mode of operation before it updates controller parameters and runs the process as a closed-loop system. The controller reacts on a persistent offset error value as a result of load disturbance or a set point change. Practical results show that such a controller may be recommended to control a variety of industrial processes. A GUI was developed to facilitate control-mode selection, the setting of controller parameters, and the display of control system variables. GUI makes it possible to put the controller in manual or self-tuning mode.

Adaptive Self‐Tuning Fuzzy Controller for a Soft Rehabilitation Machine Actuated by Pneumatic Artificial Muscles

Pneumatic artificial muscles (PAMs) have the highest power to weight and power to volume ratios of any actuator. Therefore, they can be used not only in rehabilitation engineering, but also as actuators in robots, including industrial and therapy robots. Because PAMs have highly nonlinear and time‐varying behavior associated with gas compression and the nonlinear elasticity of bladder containers, achieving excellent tracking performance using classical controllers is difficult. An adaptive self‐tuning fuzzy controller (ASTFC) including adaptive fuzzy sliding mode control (AFSMC) and functional approximation (FA) was developed in this study for overcoming the aforementioned problems. The FA technique was used to release the model‐based requirements and the update laws for the coefficients of the Fourier series function parameters were derived using a Lyapunov function to guarantee control system stability. The experimental results verified that the proposed approach can achieve excellent control performance despite external disturbance.

Robust PID Controller Design on Quantum Fuzzy Inference: Imperfect KB Quantum Self-Organization Effect-Quantum Supremacy Effect

The new method of robust self-organized PID controller design based on a quantum fuzzy inference algorithm is proposed.The structure and mechanism of a quantum PID controller(QPID)based on a quantum decision-making logic by using two K-gains of classical PID(with constant K-gains)controllers are investigated.Computational intelligence toolkit as a soft computing technology in learning situations is applied.Benchmark’s simulation results of intelligent robust control are demonstrated and analyzed.Quantum supremacy demonstrated.

Development of an Enhanced Self-Tuning RBF-PID Controller for Achieving Higher Energy-Efficient Process Control

Proportional, integral and derivative (PID) control strategy has been widely applied in heating systems in decades. To improve the accuracy and the robustness of PID control, self-tuning radial-basis-function neural network PID (RBF-PID) is developed and used. Even though being popular, during the control process both of PID and RBF-PID control strategy are inadequate in achieving simultaneous high energy-efficiency and good control accuracy. To address this problem, in this paper we develop and report an enhanced self-tuning radial-basis-function neural network PID (e-RBF-PID) controller. To identify the superiority of e-RBF-PID, following works are conducted and reported in this paper. Firstly, four controllers, i.e., on-off, PID, RBF-PID and e-RBF-PID are designed. Secondly, in order to test the performance of the e-RBF-PID controller, an experimental water heating system is constructed for being controlled. Finally, the energy consumption for the four controllers under the three control scenarios is investigated through experiments. The experimental results indicate that in the three scenarios, the developed e-RBF-PID controller outperforms on-off controller as having higher accuracy. Compared to the PID controller, the e-RBF-PID controller has higher speed in control, and the experimental results show that settling time savings is between 12.6% - 49.0%. Most importantly, less control energy consumption is obtained if using the e-RBF-PID controller. It is found that up to 28.5% energy consumption can be saved. Therefore, it is concluded that the proposed e-RBF-PID is capable of enhancing energy efficiency during control process.

Development of seam tracking system with ultrasonic sensor using self-tuning fuzzy control

One kind of the SAW seam tracking system with contactless ultrasonic sensor is presented in this paper. The new contactless ultrasonic sensor for seam tracking and the working principle of the seam tracking with the sensor are introduced. Based on the experiments, the optimal values of the fuzzy control parameters α and k 3 are defined by means of the off line adjusting method. Because the self tuning fuzzy control is adopted in the seam tracking system, the overshoot of the system is restrained, the steady state error is reduced, and the system's response speed is improved effectively. The results of the SAW seam tracking experiments show that this system's tracking accuracy is up to ±0.5 mm and the system can satisfy the requirements of the engineering application.

AUTOMATIC TUNING OF PID CONTROLLERS IN THE THERMAL POWER UNIT LOAD CONTROL SYSTEM

A method of measuring the interactions in a multivariable control sys-tem(MVCS)in time domain is defined in this paper.An intelligent decoupling com-pensator is designed in terms of the concept of fuzzy control,so that the auto-tuningof controllers’ parameters in a 2×2 MVCS can be turned into that of two independentsingle-loop control systems(SLCS).The method presented in the paper has success-fully been used in a simulation experiment on the automatic tuning of a coordinatedcontrol system(CCS)in the drum-boiler turbogenerating unit(DBTU)and the simu-lation results axe satisfactory.

A method of tuning PID parameters for P-GMAW based on physical experiments

To improve welding quality, a method of proportional-integral-differential （PlD） parameters tuning based on pulsed gas metal arc welding （P-GMAW） control was put forward. Aiming at the request of dynamic responsiveness of PGMA W constant current control, a self-developed welding waveform wavelet analyzer was employed. By tuning the proportional parameter, integration time and differential time in sequence, the optimal PID parameters could be achieved. The results showed that, due to the PID parameters tuned by this method, the welding process was stable and the weld bead appearance was nice. The requirement of dynamic responsiveness of P-GMAW constant current control was fully met.

APPLICATION OF FUZZY CONTROL METHOD WITH SELF-TUNING FACTOR IN JIGGER'S DISCHARGING

Adopting the strategy of fuzzy control with self tuning factor within whole universe of discourse, a kind of fuzzy control method for jigger discharging is put forward. This method has many advantages over the conventional PID controller in terms of response speed, stability and robustness. It is effective to restrain the jig bed from over thick or empty, and the stability of the bed is markedly improved. The good results are obtained in factory tests.

SWISS整流器分数阶PID控制策略

针对SWISS整流器的传统整数阶PID控制策略动态响应速度较慢、鲁棒性较差的问题,提出一种基于分数阶PID的SWISS整流器控制策略。基于SWISS整流器的工作原理建立其小信号模型,得到SWISS整流器的等效传递函数,并设计基于分数阶PID电压控制的双闭环控制结构。为简化分数阶PID的阶次参数设计,采用整数阶PID参数预整定的方法得到参数初值,并利用粒子群算法对分数阶PID控制器参数进行进一步设计优化。仿真和实验结果表明,分数阶PID控制策略下的SWISS整流器发生参考电压突变时电压稳定时间小于7 ms、超调量小于2%,发生负载扰动时电压稳定时间小于4 ms、超调量小于3%,动态性能优于整数阶PID控制策略。

炼油化工装置PID性能评测与优化系统的设计与实现

根据对装置对象定义分区与KPI,并通过管理端和控制端2个工作平台进行集中、分散部署的方案设计思想,研究开发炼化装置PID性能评测与优化系统,为企业重点生产装置建立PID回路多尺度性能监测与预警、PID控制故障诊断与预知性维护、PID参数自动调优以及PID回路档案等功能应用。该系统能够实时监控PID性能KPI指标值,并智能推荐最优PID参数。试点装置应用效果的标定测试结果表明,PID系统的实际应用效果达到了技术设计指标,模型和算法的适用性、软件的成熟度得到了验证,具备在炼化装置中规模化扩展应用的条件,具有很好的推广应用价值。

模糊自整定PID的液压马达驱动机床主轴速度控制研究

液压马达驱动机床主轴系统具有参数时变和高度非线性,传统PID控制器控制精度不高。针对液压马达驱动机床主轴系统速度控制问题,采用模糊自整定PID控制器实现液压马达驱动机床主轴系统的有效控制,并对控制效果进行仿真验证。构造了液压马达驱动机床主轴系统模型简图,建立了液压马达驱动机床主轴系统数学模型。对传统PID控制器参数,用模糊控制器进行实时整定,开发了模糊自整定PID控制器。最后,采用MATLAB对液压马达驱动机床主轴系统进行仿真。同时,与传统PID控制器的计算结果进行对比和分析。仿真结果显示:采用模糊自整定PID控制器的液压马达驱动机床主轴转速超调量小,具有更快的响应时间,跟踪精度高,同时系统能耗减少20%左右;即使受到较大随机干扰,模糊自整定PID控制器也能快速消除干扰,使机床主轴转速处于受控状态。采用模糊自整定PID控制器可以有效提高液压马达驱动机床主轴系统的动态稳定性以及抗干扰能力。

基于STM32的密炼机自整定PID温控系统设计

针对密炼机温度控制系统中人工整定PID带来的系统响应不及时、误差大等问题,该文设计了一种基于STM32的自整定PID温度控制系统。对于电动阀只能单极性调节问题,通过设置适当的工艺点来控制继电输出。为提高震荡曲线的辨识,采用参数归一化方法计算震荡曲线的临界增益。考虑密炼机的工作环境和系统响应曲线的频率特性,加入带有临界滞环控制的继电控制方法,提高了特征参数的精确性,更好地整定了PID参数。应用结果表明,基于STM32的PID整定温度控制系统能够将温度误差控制在1℃左右,且控制时间相比于人工PID控制系统提高了30%,极大地满足了密炼机的温度控制要求,具有良好的实用价值。

足式机器人腿部关节改进单神经网络PID控制算法研究

为了满足液压足式机器人在复杂环境中实现精确、快速的腿部关节控制需求,把单神经网络PID能够实时调节参数的优点运用到足式机器人液压机械腿关节的控制中,在单神经网络PID的基础上增加机械腿关节的位置和速度控制算法,形成改进单神经网络PID,实现了对神经元比例参数自调整、PID参数的自整定,能够较好地适应内、外参数的变化,增强了腿部关节的快速性、精确性。在Simulink中进行建模仿真以及在设计的以STM32为中央处理芯片的控制平台上进行实验测试,结果表明:改进单神经网络PID在足式液压机器人的腿部关节控制中具有响应速度快、超调量小、控制精度高、鲁棒性强等优点。

基于继电反馈PID自整定的加热系统

某工厂对某种液体进行加热控制,针对某液体复杂的反应过程,设计出带自整定功能的PID自动调节加热设备。该设计以意法半导体公司(ST)的STM32F103C8T6为控制器,以PT100为温度采集元件,控制可控硅进行过零功率调节,通过MCGS触摸屏来显示,设定有关波形和参数,在控制过程中,可以根据有关加热要求选择多种整定参数,以满足液体的不同动态响应类型。该文主要介绍系统硬件组成原理框图,给出系统主要硬件电路图和自整定算法的工作流程,并对PID程序编制的一些关键点进行说明。实验证明加热系统能满足工厂要求。

Design of PID controller with incomplete derivation based on differential evolution algorithm

To determine the optimal or near optimal parameters of PID controller with incomplete derivation, a novel design method based on differential evolution （DE） algorithm is presented. The controller is called DE-PID controller. To overcome the disadvantages of the integral performance criteria in the frequency domain such as IAE, ISE, and ITSE, a new performance criterion in the time domain is proposed. The optimization procedures employing the DE algorithm to search the optimal or near optimal PID controller parameters of a control system are demonstrated in detail. Three typical control systems are chosen to test and evaluate the adaptation and robustness of the proposed DE-PID controller. The simulation results show that the proposed approach has superior features of easy implementation, stable convergence characteristic, and good computational efficiency. Compared with the ZN, GA, and ASA, the proposed design method is indeed more efficient and robust in improving the step response of a control system.

Design of PID controller with incomplete derivation based on ant system algorithm

A new and intelligent design method for PID controller with incomplete derivation is proposed based on the ant system algorithm ( ASA) . For a given control system with this kind of PID controller, a group of optimal PID controller parameters K p * , T i * , and T d * can be obtained by taking the overshoot, settling time, and steady-state error of the system's unit step response as the performance indexes and by use of our improved ant system algorithm. K p * , T i * , and T d * can be used in real-time control. This kind of controller is called the ASA-PID controller with incomplete derivation. To verify the performance of the ASA-PID controller, three different typical transfer functions were tested, and three existing typical tuning methods of PID controller parameters, including the Ziegler-Nichols method (ZN),the genetic algorithm (GA),and the simulated annealing (SA), were adopted for comparison. The simulation results showed that the ASA-PID controller can be used to control different objects and has better performance compared with the ZN-PID and GA-PID controllers, and comparable performance compared with the SA-PID controller.