Fuzzy Control Optimization of Loading Paths for Hydroforming of Variable Diameter Tubes

The design of the loading path is one of the important research contents of the tube hydroforming process.Optimization of loading paths using optimization algorithms has received attention due to the inefficiency of only finite element optimization.In this paper,the hydroforming process of 5A02 aluminum alloy variable diameter tube was as the research object.Fuzzy control was used to optimize the loading path,and the fuzzy rule base was established based on FEM.The minimum wall thickness and wall thickness reduction rate were determined as input membership functions,and the axial feeds variable value of the next step was used as output membership functions.The results show that the optimized loading path greatly improves the uniformity of wall thickness and the forming effect compared with the linear loading path.The round corner lamination rate of the tube is 91.2%under the fuzzy control optimized loading path,which was increased by 47.1%and 22.6%compared with linear loading Path 1 and Path 2,respectively.Based on the optimized loading path in the experiment,the minimum wall thickness of the variable diameter tube was 1.32 mm and the maximum thinning rate was 12.4%.The experimental results were consistent with the simulation results,which verified the accuracy of fuzzy control.The research results provide a reference for improving the forming quality of thin-walled tubes and plates.

Fuzzy-GA PID controller with incomplete derivation and its application to intelligent bionic artificial leg

An optimal PID controller with incomplete derivation is proposed based on fuzzy inference and the geneticalgorithm, which is called the fuzzy-GA PID controller with incomplete derivation. It consists of the off-line part andthe on-line part. In the off-line part, by taking the overshoot, rise time, and settling time of system unit step re-sponse as the performance indexes and by using the genetic algorithm, a group of optimal PID parameters K*p , Ti* ,and Tj are obtained, which are used as the initial values for the on-line tuning of PID parameters. In the on-linepart, based on K; , Ti* , and T*d and according to the current system error e and its time derivative, a dedicatedprogram is written, which is used to optimize and adjust the PID parameters on line through a fuzzy inference mech-anism to ensure that the system response has optimal dynamic and steady-state performance. The controller has beenused to control the D. C. motor of the intelligent bionic artificial leg designed by the authors. The result of computersimulation shows that this kind of optimal PID controller has excellent control performance and robust performance.

Automobile active suspension system with fuzzy control

A quarter-automobile active suspension model was proposed. High speed on/off solenoid valves were used as control valves and fuzzy control was chosen as control method . Based on force analyses of system parts, a mathematical model of the active suspension system was established and simplified by linearization method. Simulation study was conducted with Matlab and three scale coefficients of fuzzy controller (ke, kec, ku) were acquired. And an experimental device was designed and produced. The results indicate that the active suspension system can achieve better vibration isolation performance than passive suspension system, the displacement amplitude of automobile body can be reduced to 55%. Fuzzy control is an effective control method for active suspension system.

CRUISE FUZZY CONTROL FOR AUTOMOBILE WITH CVT

To develop cruise control system of an automobile with the metal pushing V-belt type CVT,the dynamic model of automobile travelling longitudinally is established, and the fuzzy controller of control system is designed. Considering uncertainty system parameter and exterior resistance disturbances, the stability of controller is investigated by simulating. The results of its simulation show that the fuzzy controller designed has practicability.

Optimal fuzzy PID controller with adjustable factors based on flexible polyhedron search algorithm

A new kind of optimal fuzzy PID controller is proposed, which contains two parts. One is an on line fuzzy inference system, and the other is a conventional PID controller. In the fuzzy inference system, three adjustable factors x p, x i , and x d are introduced. Their functions are to further modify and optimize the result of the fuzzy inference so as to make the controller have the optimal control effect on a given object. The optimal values of these adjustable factors are determined based on the ITAE criterion and the Nelder and Mead′s flexible polyhedron search algorithm. This optimal fuzzy PID controller has been used to control the executive motor of the intelligent artificial leg designed by the authors. The result of computer simulation indicates that this controller is very effective and can be widely used to control different kinds of objects and processes.

Active Force with Fuzzy Logic Control of a Two-Link Arm Driven by Pneumatic Artificial Muscles

In this paper, the practicality and feasibility of Active Force Control （AFC） integrated with Fuzzy Logic（AFCAFL） applied to a two link planar arm actuated by a pair of Pneumatic Artificial Muscle （PAM） is investigated. The study emphasizes on the application and control of PAM actuators which may be considered as the new generation of actuators comprising fluidic muscle that has high-tension force, high power to weight ratio and high strength in spite of its drawbacks in the form of high nonlinearity behaviour, high hysteresis and time varying parameters. Fuzzy Logic （FL） is used as a technique to estimate the best value of the inertia matrix of robot arm essential for the AFC mechanism that is complemented with a conventional Propor- tional-Integral-Derivative （PID） control at the outermost loop. A simulation study was first performed followed by an experi- mental investigation for validation. The experimental study was based on the independent joint tracking control and coordinated motion control of the arm in Cartesian or task space. In the former, the PAM actuated arm is commanded to track the prescribed trajectories due to harmonic excitations at the joints for a given frequency, whereas for the latter, two sets of trajectories with different loadings were considered. A practical rig utilizing a Hardware-In-The-Loop Simulation （HILS） configuration was developed and a number of experiments were carried out. The results of the experiment and the simulation works were in good agreement, which verified the effectiveness and robustness of the proposed AFCAFL scheme actuated by PAM.

Fuzzy adaptive learning control network with sigmoid membership function

To get simpler operation in modified fuzzy adaptive learning control network （FALCON） in some engineering application, sigmoid nonlinear function is employed as a substitute of traditional Gaussian membership function. For making the modified FALCON learning more efficient and stable, a simulated annealing （SA） learning coefficient is introduced into learning algorithm. At first, the basic concepts and main advantages of FALCON were briefly reviewed. Subsequently, the topological structure and nodes operation were illustrated; the gradient-descent learning algorithm with SA learning coefficient was derived; and the distinctions between the archetype and the modification were analyzed. Eventually, the significance and worthiness of the modified FALCON were validated by its application to probability prediction of anode effect in aluminium electrolysis cells.

Simulating a fuzzy level controller for flotation columns

Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters that traditional methods have difficulty controlling. We have applied fuzzy control methods to the flotation column and tested the performance of the design by Matlab/Simulink simulation. The simulations show that level control in the flotation column becomes smoother and more rapid with the fuzzy controller. Compared to PID control methods the overshoot in valve position, the adjustment time, and the robustness of the controller are all improved. This indicates that it is suitable to model fuzzy controllers in applications for the study of automatic control of flotation column.

HUMAN-SIMULATING VEHICLE STEERING CONTROL ALGORITHM

A new vehicle steering control algorithm is presented. Unlike the traditional methods do, the algorithm uses a sigmoid function to describe the principle of the human driver＇s steering strategy. Based on this function, a human simulating vehicle steering model, human-simulating steering control（HS） algorithm is designed. In order to improve the adaptability to different environments, a parameter adaptive adjustment algorithm is presented. This algorithm can online modify the value of the key parameters of the HS real time. HS controller is used on a vehicle equipped with computer vision system and computer controlled steering actuator system, the result from the automatic vehicle steering experiment shows that the HS algorithm gives good performance at different speed, even at the maximum speed of 172 km/h.

Self-learning fuzzy neural network control for backside width of weld pool in pulsed GTAW with wire filler

The weld pool shape control by intelligent strategy was studied. In order to improve the ability of self-learning and self-adaptation of the ordinary fuzzy control, a self-learning fuzzy neural network controller (FNNC) for backside width of weld pool in pulsed gas tungsten arc welding (GTAW) with wire filler was designed. In FNNC, the fuzzy system was expressed by an equivalence neural network, the membership functions and inference rulers were decided through the learning of the neural network. Then, the FNNC control arithmetic was analyzed, simulating experiment was done, and the validating experiments on varied heat sink workpiece and varied gap workpiece were implemented. The maximum error between the real value and the given one was 0.39mm, the mean error was 0.014mm, and the root-mean-square was 0.14mm. The real backside width was maintained around the given value. The results show that the self-learning fuzzy neural network control strategy can achieve a perfect control effect under different set values and conditions, and is suitable for the welding process with the varied structure and coefficients of control model.

Fuzzy Logic Strategy for Solving an Optimal Control Problem of Glucose and Insulin in Diabetic Human

This paper aims at the development of an approach integrating the fuzzy logic strategy for a glucose and insulin in diabetic human optimal control problem. To test the efficiency of this strategy, the author proposes a numerical comparison with the indirect method. The results are in good agreement with experimental data.

Fuzzy Simulation Human Intelligent Control System Design on Gyratory Breaker

In order to deal with the complex process that incurs serious time delay, enormous inertia and nonlinear problems, fuzzy simulation human intelligent control algorithm rules are established. The fuzzy simulation human intelligent controller and the hardware with the single-chip microcomputer are designed and the anti-interference measures to the whole system are provided.

Precision Point to Point Control of Proportional Valve Controlled Motor with a Time Varying Load

Aim In accordance with the positioning control for valve controlled motor electrohydraulic proportional servo systems driving the static load torque, the positioning performance was studied in the presence of the time? varying deadzone and gain. Methods The large positioning errors caused by the time varying deadzone were significantly reduced by using the dynamic compensation method for the deadzone; and the large overshoot caused by the time varying gain were dramatically reduced by using the three section intelligent control schemes. Results Experimental results demonstrated that the positioning performance of rapid response, high accuracy and smaller or even no overshoot was achieved under a wide variations of load torque. Conclusion The good positioning performance for valve controlled motor servo systems has been achieved in the presence of the time varying deadzone and gain.

FUZZY GLOBAL SLIDING MODE CONTROL BASED ON GENETIC ALGORITHM AND ITS APPLICATION FOR FLIGHT SIMULATOR SERVO SYSTEM

To alleviate the chattering problem, a new type of fuzzy global sliding mode controller （FGSMC） is presented. In this controller, the switching gain is estimated by fuzzy logic system based on the reachable conditions of sliding mode controller（SMC）, and genetic algorithm （GA） is used to optimize scaling factor of the switching gain, thus the switch chattering of SMC can be alleviated. Moreover, global sliding mode is realized by designing an exponential dynamic sliding surface. Simulation and real-time application for flight simulator servo system with Lugre friction are given to indicate that the proposed controller can guarantee high robust performance all the time and can alleviate chattering phenomenon effectively.

Real-time multi-step prediction control for BP network with delay

Real time multi step prediction of BP network based on dynamical compensation of system characteristics is suggested by introducing the first and second derivatives of the system and network outputs into the network input layer, and real time multi step prediction control is proposed for the BP network with delay on the basis of the results of real time multi step prediction, to achieve the simulation of real time fuzzy control of the delayed time system.

Fuzzy logic for large mining bucket wheel reclaimer motion control—from an engineer's perspective

The bucket wheel reclaimer(BWR) is a key piece of equipment which has been widely used for stacking and reclaiming bulk materials(i.e.iron ore and coal) in places such as ports,iron-steel plants,coal storage areas,and power stations from stockpiles.BWRs are very large in size,heavy in weight,expensive in price,and slow in motion.There are many challenges in attempting to automatically control their motion to accurately follow the required trajectories involving uncertain parameters from factors such as friction,turbulent wind,its own dynamics,and encoder limitations.As BWRs are always heavily engaged in production and cannot be spared very long for motion control studies and associated developments,a BWR model and simulation environment closely resembling real life conditions would be beneficial.The following research focused mainly on the implementation of fuzzy logic to a BWR motion control from an engineer's perspective.First,the modeling of a BWR including partially known parameters such as friction force and turbulence to the system was presented.This was then followed by the design of a fuzzy logic-based control built on a model-based control loop.The investigation provides engineers with an example of applying fuzzy logic in a model based approach to properly control the motion of a large BWR following defined trajectories,as well as to show possible ways of further improving the controller performance.The result indicates that fuzzy logic can be applied easily by engineers to overcome most motion control issues involving a large BWR.

Adaptive control of parallel manipulators via fuzzy-neural network algorithm

This paper considers adaptive control of parallel manipulators combined with fuzzy-neural network algorithms （FNNA）. With this algorithm, the robustness is guaranteed by the adaptive control law and the parametric uncertainties are eliminated. FNNA is used to handle model uncertainties and external disturbances. In the proposed control scheme, we consider modifying the weight of fuzzy rules and present these rules to a MIMO system of parallel manipulators with more than three degrees-of-freedom （DoF）. The algorithm has the advantage of not requiring the inverse of the Jacobian matrix especially for the low DoF parallel manipulators. The validity of the control scheme is shown through numerical simulations of a 6-RPS parallel manipulator with three DoF.

Controlling Torque Distribution for Parallel Hybrid Vehicle Based on Hierarchical Structure Fuzzy Logic

The Hierarchical Structure Fuzzy Logic Control (HSFLC) strategies of torque distribute for Parallel Hybrid Electric Vehicle (PHEV) in the mode of operation of the vehicle i. e. , acceleration, cruise, deceleration etc. have been studied. Using secondly developed the hybrid vehicle simulation tool ADVISOR, the dynamic model of PHEV has been set up by MATLAB/SIMULINK. The engine, motor as well as the battery characteristics have been studied. Simulation results show that the proposed hierarchical structured fuzzy logic control strategy is effective over the entire operating range of the vehicle in terms of fuel economy. Based on the analyses of the simulation results and driver’s experiences, a fuzzy controller is designed and developed to control the torque distribution. The controller is evaluated via hardware-in-the-loop simulator (HILS). The results show that controller verify its value.

HYBRID FUZZY CONTROL FOR ELECTRO-HYDRAULIC ACTIVE DAMPING SUSPENSION

A new control scheme, the hybrid fuzzy control method, for active dampingsuspension system is presented. The scheme is the result of effective combination of the statisticaloptimal control method based on the statistical property of suspension system, with the bang-bangcontrol method based on the real-time characteristics of suspension system. Computer simulations areperformed to compare the effectiveness of hybrid fuzzy control scheme with that of optimal dampingcontrol, bang-bang control, and passive suspension. It takes the effects of time-variant factorsinto full account. The superiority of the proposed hybrid fuzzy control scheme for active dampingsuspension to the passive suspension is verified in the experiment study.

Adaptive Fuzzy Control for CVT Vehicle

On the simple continuously variable transmission （CVT） driveline model, the design of adaptive fuzzy control system for CVT vehicle is presented. The adaptive fuzzy control system consists of a scaling factor self-tuning fuzzy-PI throttle controller, and a hybrid fuzzy-PID CVT ratio and brake controller. The presented adaptive fuzzy control strategy is vehicle model independent, which depends only on the instantaneous vehicle states, but does not depend on vehicle parameters. So it has good robustness against uncertain vehicle parameters and exogenous load disturbance. Simulation results show that the proposed adaptive fuzzy strategy has good adaptability and practicality value.