Improved control of intelligent excavator using proportional-integral-plus gain scheduling

Consider the design and implementation of an electro-hydraulic control system for a robotic excavator, namely the Lancaster University computerized and intelligent excavator (LUCIE). The excavator was developed to autonomously dig trenches without human intervention. One stumbling block is the achievement of adequate, accurate, quick and smooth movement under automatic control, which is difficult for traditional control algorithm, e.g. PI/PID. A gain scheduling design, based on the true digital proportional-integral-plus (PIP) control methodology, was utilized to regulate the nonlinear joint dynamics. Simulation and initial field tests both demonstrated the feasibility and robustness of proposed technique to the uncertainties of parameters, time delay and load disturbances, with the excavator arm directed along specified trajectories in a smooth, fast and accurate manner. The tracking error magnitudes for oblique straight line and horizontal straight line are less than 20 mm and 50 mm, respectively, while the velocity reaches 9 m/min.

Gain Scheduling Control of Nonlinear Shock Motion Based on Equilibrium Manifold Linearization Model

The equilibrium manifold linearization model of nonlinear shock motion is of higher accuracy and lower complexity over other models such as the small perturbation model and the piecewise-linear model. This paper analyzes the physical significance of the equilibrium manifold linearization model, and the self-feedback mechanism of shock motion is revealed. This helps to describe the stability and dynamics of shock motion. Based on the model, the paper puts forwards a gain scheduling control method for nonlinear shock motion. Simulation has shown the validity of the control scheme.

Using Adaptive Gain Scheduling LQR Method Control of Arm Driven Inverted Pendulum System Based on PIC18F4431

The arm driven inverted pendulum system is a highly nonlinear model, muhivariable and absolutely unstable dynamic system so it is very difficult to obtain exact mathematical model and balance the inverted pendulum with variable position of the ann. To solve this problem, this paper presents a mathematical model for arm driven inverted pendulum in mid-position configuration and an adaptive gain scheduling linear quadratic regulator control method for the stabilizing the inverted pendulum. The proposed controllers for arm driven inverted pendulum are simulated using MATLAB-SIMULINK and implemented on an experiment system using PIC 18F4431 mieroeontroller. The result of experiment system shows the control performance to be very good in a wide range stabilization of the arm position.

Missile robust gain scheduling autopilot design using full block multipliers

Reduction of conservatism is one of the key and difficult problems in missile robust gain scheduling autopilot design based on multipliers.This article presents a scheme of adopting linear parameter-varying（LPV） control approach with full block multipliers to design a missile robust gain scheduling autopilot in order to eliminate conservatism.A model matching design structure with a high demand on matching precision is constructed based on the missile linear fractional transformation（LFT） model.By applying full block S-procedure and elimination lemma,a convex feasibility problem with an infinite number of constraints is formulated to satisfy robust quadratic performance specifications.Then a grid method is adopted to transform the infinite-dimensional convex feasibility problem into a solvable finite-dimensional convex feasibility problem,based on which a gain scheduling controller with linear fractional dependence on the flight Mach number and altitude is derived.Static and dynamic simulation results show the effectiveness and feasibility of the proposed scheme.

Motion stability and control of supercavitating vehicle with variable cavitation number

Cavitation number and speed are capable of variation during the motion of supercavitating vehicle underwater, for example, under the condition of accelerated motion stage and external disturbance. The dynamic model and control challenge associated with the longitudinal motion of supereavitating vehicle with variable cavitation number and speed have been explored. Based on the principle of cavity expansion independence the properties of cavity and the influence on planning force of body were researched. Calculation formula of efficiency of the fin was presented. Nonlinear dynamics model of variable cavitation number and speed supercavitating vehicle was established. Stabilities of the open-loop systems of different situations were analyzed. The simulations results of open-loop systems show that it is necessary to design a control method to control a supereavitating vehicle. A gain schedule controller with guaranteed H∞ performance was designed to stabilize the dive-plane dynamics of supercavitating vehicle under changing conditions.

基于参数依赖的直升机LPV鲁棒变增益控制

针对直升机飞行状态量在全飞行包线内动态变化的问题,设计了一种鲁棒变增益控制方法。在直升机非线性模型的基础上,研究了直升机前飞状态下的纵向线性参数变化(LPV)模型,并引入参考输入,将已建立的模型增广为仿射参数依赖LPV模型;运用鲁棒变增益仿射参数依赖Lyapunov函数的方法对该模型进行控制律设计,并验证了其稳定性;最后通过数值仿真验证了所设计控制器的实时性与鲁棒性。研究结果表明,该方法有效降低了单一Lyapunov函数所带来的保守性,可以用于直升机LPV模型的鲁棒控制与状态量跟踪。