We report accurate, calculated electronic, transport, and bulk properties of zinc blende gallium arsenide (GaAs). Our ab-initio, non-relativistic, self-con-sistent calculations employed a local density approximation (...We report accurate, calculated electronic, transport, and bulk properties of zinc blende gallium arsenide (GaAs). Our ab-initio, non-relativistic, self-con-sistent calculations employed a local density approximation (LDA) potential and the linear combination of atomic orbital (LCAO) formalism. We strictly followed the Bagayoko, Zhao, and William (BZW) method, as enhanced by Ekuma and Franklin (BZW-EF). Our calculated, direct band gap of 1.429 eV, at an experimental lattice constant of 5.65325 Å, is in excellent agreement with the experimental values. The calculated, total density of states data reproduced several experimentally determined peaks. We have predicted an equilibrium lattice constant, a bulk modulus, and a low temperature band gap of 5.632 Å, 75.49 GPa, and 1.520 eV, respectively. The latter two are in excellent agreement with corresponding, experimental values of 75.5 GPa (74.7 GPa) and 1.519 eV, respectively. This work underscores the capability of the local density approximation (LDA) to describe and to predict accurately properties of semiconductors, provided the calculations adhere to the conditions of validity of DFT.展开更多
GaAs nanocrystals were prepared via a simple mechanical ball milling technique. The prepared GaAs nanocrystals have high purity and could form colloidal ethanol suspension without any surfactant additives. The colloid...GaAs nanocrystals were prepared via a simple mechanical ball milling technique. The prepared GaAs nanocrystals have high purity and could form colloidal ethanol suspension without any surfactant additives. The colloidal GaAs nanocrystal suspension displayed excellent two-photon absorption property over the visible and near-infrared region from 490 nm to 1064 nm, which enables it to become a promising broadband optical limiting material.展开更多
This review article discusses the development of gallium arsenide(GaAs)-based resonant tunneling diodes(RTD)since the 1970s.To the best of my knowledge,this article is the first review of GaAs RTD technology which cov...This review article discusses the development of gallium arsenide(GaAs)-based resonant tunneling diodes(RTD)since the 1970s.To the best of my knowledge,this article is the first review of GaAs RTD technology which covers different epitaxialstructure design,fabrication techniques,and characterizations for various application areas.It is expected that the details presented here will help the readers to gain a perspective on the previous accomplishments,as well as have an outlook on the current trends and future developments in GaAs RTD research.展开更多
Ultrafast laser inscription(ULI)inside semiconductors offers new perspectives for 3D monolithic structures to be fabricated and new functionalities to be added in electronic and photonic microdevices.However,important...Ultrafast laser inscription(ULI)inside semiconductors offers new perspectives for 3D monolithic structures to be fabricated and new functionalities to be added in electronic and photonic microdevices.However,important challenges remain because of nonlinear effects such as strong plasma generation that distort the energy delivery at the focal point when exposing these materials to intense infrared light.Up to now,the successful technological demonstrations have primarily concentrated on silicon(Si).In this paper,we target at another important semiconductor:gallium arsenide(GaAs).With nonlinearities higher than those of Si,3D-machining of GaAs with femtosecond pulses becomes even harder.However,we show that the difficulty can be circumvented by burst-mode irradiation.We generate and apply trains of pulses at terahertz repetition rates for efficient pulse-to-pulse accumulation of laser-induced free carriers in the focal region,while avoiding an overdose of prefocal excitations.The superior performance of burst-mode irradiation is confirmed by a comparative study conducted with infrared luminescence microscopy.The results indicate a successful reduction of the plasma density in the prefocal region so that higher pulse energy reaches the focal spot.The same method is applied to identify optimum irradiation conditions considering particular cases such as asymmetric pulse trains and aberrated beams.With 64-pulse trains,we successfully manage to cross the writing threshold providing a solution for ULI inside GaAs.The application potential is finally illustrated with a stealth dicing demonstration by taking benefit of the burst mode.The irradiation method opens wide possibilities for 3D structuring inside GaAs by ULI.展开更多
Negative thermal expansion of gallium arsenide has been investigated through temperature dependent Extended X-ray Absorption Fine Structure (EXAFS) measurements. The bond thermal expansion coefficient αbond has been ...Negative thermal expansion of gallium arsenide has been investigated through temperature dependent Extended X-ray Absorption Fine Structure (EXAFS) measurements. The bond thermal expansion coefficient αbond has been evaluated and compared to negative expansion coefficient αtens due to tension effects. The overall thermal expansion coefficient is the sum?of?αbond?and αtens. Below 60 K, αtens is greater than αbond? yielding to a negative expansion in this temperature region. Tension effects are progressively overcome by the stretching effects in the region 60 - 300 K. The asymmetry of nearest neighbors distribution is not negligible since the gaussian approximation underestimates the bond expansion by about 0.00426 Å. This error decreases when the temperature is lowered. The accuracy in the thermal expansion evaluation and the connection between third cumulant and thermal expansion are discussed.展开更多
This research paper is on Density Functional Theory (DFT) within Local Density Approximation. The calculation was performed using Fritz Haber Institute Ab-initio Molecular Simulations (FHIAIMS) code based on numerical...This research paper is on Density Functional Theory (DFT) within Local Density Approximation. The calculation was performed using Fritz Haber Institute Ab-initio Molecular Simulations (FHIAIMS) code based on numerical atomic-centered orbital basis sets. The electronic band structure, total density of state (DOS) and band gap energy were calculated for Gallium-Arsenide and Aluminium-Arsenide in diamond structures. The result of minimum total energy and computational time obtained from the experimental lattice constant 5.63 A for both Gallium Arsenide and Aluminium Arsenide is -114,915.7903 eV and 64.989 s, respectively. The electronic band structure analysis shows that Aluminium-Arsenide is an indirect band gap semiconductor while Gallium-Arsenide is a direct band gap semiconductor. The energy gap results obtained for GaAs is 0.37 eV and AlAs is 1.42 eV. The band gap in GaAs observed is very small when compared to AlAs. This indicates that GaAs can exhibit high transport property of the electron in the semiconductor which makes it suitable for optoelectronics devices while the wider band gap of AlAs indicates their potentials can be used in high temperature and strong electric fields device applications. The results reveal a good agreement within reasonable acceptable errors when compared with the theoretical and experimental values obtained in the work of Federico and Yin wang [1] [2].展开更多
For the last several years, the linear array x-ray detector for x-ray imaging with gallium arsenide direct conversion sensitive elements has been developed and tested at the In-stitute for High Energy Physics. The arr...For the last several years, the linear array x-ray detector for x-ray imaging with gallium arsenide direct conversion sensitive elements has been developed and tested at the In-stitute for High Energy Physics. The array consists of 16 sensitive modules. Each module has 128 gallium arsenide (GaAs) sensitive elements with 200 μm pitch. Current article describes two key program procedures of initial dark current compensation of each sensitive element in the linear array, and sensitivity adjustment for alignment of strip pattern in the raw image data. As a part of evaluation process a modular transfer function (MTF) was measured with the slanted sharp-edge object under RQA5 technique as it described in the International Electrotechnical Commission 62220-1 standard (high voltage 70 kVp, additional aluminium filter 21 mm) for images with compensated dark currents and adjusted sensitivity of detector elements. The 10% level of the calculated MTF function has spatial resolution within 2 - 3 pair of lines per mm for both vertical and horizontal orientation.展开更多
本文从理论上分析了实现 In Ga As/Ga As/Al Ga As应变量子阱激光器高光功率转换效率、高输出功率的有效途径 ,并优化了器件结构 ,可以同时获得低的腔面光功率密度和小的垂直于结平面远场发散角 .利用分子束外延生长构成了高质量 In Ga ...本文从理论上分析了实现 In Ga As/Ga As/Al Ga As应变量子阱激光器高光功率转换效率、高输出功率的有效途径 ,并优化了器件结构 ,可以同时获得低的腔面光功率密度和小的垂直于结平面远场发散角 .利用分子束外延生长构成了高质量 In Ga As/Ga As/Al Ga As应变量子阱激光器 ,其最高光功率转换效率为 53%、最大输出功率为 3.7W,垂直于结平面方向远场发散角为展开更多
文摘We report accurate, calculated electronic, transport, and bulk properties of zinc blende gallium arsenide (GaAs). Our ab-initio, non-relativistic, self-con-sistent calculations employed a local density approximation (LDA) potential and the linear combination of atomic orbital (LCAO) formalism. We strictly followed the Bagayoko, Zhao, and William (BZW) method, as enhanced by Ekuma and Franklin (BZW-EF). Our calculated, direct band gap of 1.429 eV, at an experimental lattice constant of 5.65325 Å, is in excellent agreement with the experimental values. The calculated, total density of states data reproduced several experimentally determined peaks. We have predicted an equilibrium lattice constant, a bulk modulus, and a low temperature band gap of 5.632 Å, 75.49 GPa, and 1.520 eV, respectively. The latter two are in excellent agreement with corresponding, experimental values of 75.5 GPa (74.7 GPa) and 1.519 eV, respectively. This work underscores the capability of the local density approximation (LDA) to describe and to predict accurately properties of semiconductors, provided the calculations adhere to the conditions of validity of DFT.
基金The work was financially supported by the National Natural Science Foundation of China (Nos. 10104003, 10204003, 90206003, and 90101027) and the National Key Basic Research Special Foundation of China (No.TG1999075207).
文摘GaAs nanocrystals were prepared via a simple mechanical ball milling technique. The prepared GaAs nanocrystals have high purity and could form colloidal ethanol suspension without any surfactant additives. The colloidal GaAs nanocrystal suspension displayed excellent two-photon absorption property over the visible and near-infrared region from 490 nm to 1064 nm, which enables it to become a promising broadband optical limiting material.
文摘This review article discusses the development of gallium arsenide(GaAs)-based resonant tunneling diodes(RTD)since the 1970s.To the best of my knowledge,this article is the first review of GaAs RTD technology which covers different epitaxialstructure design,fabrication techniques,and characterizations for various application areas.It is expected that the details presented here will help the readers to gain a perspective on the previous accomplishments,as well as have an outlook on the current trends and future developments in GaAs RTD research.
基金This research has received funding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program(Grant Agreement No.724480).
文摘Ultrafast laser inscription(ULI)inside semiconductors offers new perspectives for 3D monolithic structures to be fabricated and new functionalities to be added in electronic and photonic microdevices.However,important challenges remain because of nonlinear effects such as strong plasma generation that distort the energy delivery at the focal point when exposing these materials to intense infrared light.Up to now,the successful technological demonstrations have primarily concentrated on silicon(Si).In this paper,we target at another important semiconductor:gallium arsenide(GaAs).With nonlinearities higher than those of Si,3D-machining of GaAs with femtosecond pulses becomes even harder.However,we show that the difficulty can be circumvented by burst-mode irradiation.We generate and apply trains of pulses at terahertz repetition rates for efficient pulse-to-pulse accumulation of laser-induced free carriers in the focal region,while avoiding an overdose of prefocal excitations.The superior performance of burst-mode irradiation is confirmed by a comparative study conducted with infrared luminescence microscopy.The results indicate a successful reduction of the plasma density in the prefocal region so that higher pulse energy reaches the focal spot.The same method is applied to identify optimum irradiation conditions considering particular cases such as asymmetric pulse trains and aberrated beams.With 64-pulse trains,we successfully manage to cross the writing threshold providing a solution for ULI inside GaAs.The application potential is finally illustrated with a stealth dicing demonstration by taking benefit of the burst mode.The irradiation method opens wide possibilities for 3D structuring inside GaAs by ULI.
文摘Negative thermal expansion of gallium arsenide has been investigated through temperature dependent Extended X-ray Absorption Fine Structure (EXAFS) measurements. The bond thermal expansion coefficient αbond has been evaluated and compared to negative expansion coefficient αtens due to tension effects. The overall thermal expansion coefficient is the sum?of?αbond?and αtens. Below 60 K, αtens is greater than αbond? yielding to a negative expansion in this temperature region. Tension effects are progressively overcome by the stretching effects in the region 60 - 300 K. The asymmetry of nearest neighbors distribution is not negligible since the gaussian approximation underestimates the bond expansion by about 0.00426 Å. This error decreases when the temperature is lowered. The accuracy in the thermal expansion evaluation and the connection between third cumulant and thermal expansion are discussed.
文摘This research paper is on Density Functional Theory (DFT) within Local Density Approximation. The calculation was performed using Fritz Haber Institute Ab-initio Molecular Simulations (FHIAIMS) code based on numerical atomic-centered orbital basis sets. The electronic band structure, total density of state (DOS) and band gap energy were calculated for Gallium-Arsenide and Aluminium-Arsenide in diamond structures. The result of minimum total energy and computational time obtained from the experimental lattice constant 5.63 A for both Gallium Arsenide and Aluminium Arsenide is -114,915.7903 eV and 64.989 s, respectively. The electronic band structure analysis shows that Aluminium-Arsenide is an indirect band gap semiconductor while Gallium-Arsenide is a direct band gap semiconductor. The energy gap results obtained for GaAs is 0.37 eV and AlAs is 1.42 eV. The band gap in GaAs observed is very small when compared to AlAs. This indicates that GaAs can exhibit high transport property of the electron in the semiconductor which makes it suitable for optoelectronics devices while the wider band gap of AlAs indicates their potentials can be used in high temperature and strong electric fields device applications. The results reveal a good agreement within reasonable acceptable errors when compared with the theoretical and experimental values obtained in the work of Federico and Yin wang [1] [2].
文摘For the last several years, the linear array x-ray detector for x-ray imaging with gallium arsenide direct conversion sensitive elements has been developed and tested at the In-stitute for High Energy Physics. The array consists of 16 sensitive modules. Each module has 128 gallium arsenide (GaAs) sensitive elements with 200 μm pitch. Current article describes two key program procedures of initial dark current compensation of each sensitive element in the linear array, and sensitivity adjustment for alignment of strip pattern in the raw image data. As a part of evaluation process a modular transfer function (MTF) was measured with the slanted sharp-edge object under RQA5 technique as it described in the International Electrotechnical Commission 62220-1 standard (high voltage 70 kVp, additional aluminium filter 21 mm) for images with compensated dark currents and adjusted sensitivity of detector elements. The 10% level of the calculated MTF function has spatial resolution within 2 - 3 pair of lines per mm for both vertical and horizontal orientation.
文摘本文从理论上分析了实现 In Ga As/Ga As/Al Ga As应变量子阱激光器高光功率转换效率、高输出功率的有效途径 ,并优化了器件结构 ,可以同时获得低的腔面光功率密度和小的垂直于结平面远场发散角 .利用分子束外延生长构成了高质量 In Ga As/Ga As/Al Ga As应变量子阱激光器 ,其最高光功率转换效率为 53%、最大输出功率为 3.7W,垂直于结平面方向远场发散角为
