A direct numerical simulation(DNS) method is used to calculate the partitioned convection system with Ra number ranging from 10^7 to 2×10^9.Using the boundary layer thickness to normalize the height of gaps d, we...A direct numerical simulation(DNS) method is used to calculate the partitioned convection system with Ra number ranging from 10^7 to 2×10^9.Using the boundary layer thickness to normalize the height of gaps d, we find a strong consistency between the variation of the TD number(the average value of the temperature in each heat transfer channel is averaged after taking the absolute values) with the change of the height of gaps and the variation of the TD number with the change of Ra number in partitioned convection.For a given thickness of partition, heights of gaps are approximately equal to 0.5 or 1 time of the thermal boundary layer thickness λθ at different Ra numbers.TD number representing temperature characteristics is almost the constant value, which means that TD number is a function of d/λθ only.Analysis of local temperature field of area in gaps shows that the temperature distribution in the gaps are basically the same when d/λθ is certain.The heat transfer Nu number of the system at d/λθ≈ 0.5 is larger than that of d/λθ≈ 1, both of them have the same scaling law with Ra number and Nu^Ra^0.25.展开更多
Infectious disease departments in hospitals require pressure gradient to create unidirectional airflow to prevent the spread of contaminants,typically by creating active air infiltration through the difference between...Infectious disease departments in hospitals require pressure gradient to create unidirectional airflow to prevent the spread of contaminants,typically by creating active air infiltration through the difference between supply and exhaust air volumes.The door gap is the channel of air flow between rooms,so its height has an important influence on the pressure difference and infiltration air volume of the room.There is still a lack of research on setting reasonable ventilation strategies according to the different heights of door gaps at different positions in the building.In this study,model of a set of isolation wards was established and analyzed using the multi-zone simulation software CONTAM,and the ventilation strategies with different heights of door gaps were applied to the actual infection diseases department.The results show that in a building with ventilation system divided by functional area,the difference in the height of the door gaps requires different active infiltration air volumes.Pressure fluctuations in the medical and patient corridors are greater than in other rooms.The significance of this study is to understand the active infiltration of air to guide the design and operation of ventilation systems in infectious disease hospitals or building remodeled to isolate close contacts of COVID-19 patients.It is also instructive for the design of pressure gradients in clean workshops,biological laboratories,and other similar buildings.展开更多
For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body&#...For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body's compression ratio. Horizontal roof gap, as a key parameter of backfilling characteristics, may impact the backfilling effect from the aspects of control of roof subsidence in advance, support stress, backfilling process and the support design. Firstly, the reason why horizontal roof gap exists was analyzed and its definition, causes and connotation were introduced, then adopting the Pro/E 3D simulation software, three typical 3D entity models of backfill hydraulic supports were built, based on the influence of horizontal roof gap on backfilling effect, and influence rules of four factors, i.e. support height, suspension height, suspension angle and tamping angle, were emphatically analyzed on horizontal roof gap. The results indicate that, the four factors all have significant impacts on horizontal roof gap, but show differences in influence trend and degree, showing negative linear correlation, positive linear correlation, positive semi-parabolic correlation and negative semi-parabolic correlation, respectively. Four legs type is the most adaptive to the four factors, while six legs(II) type has the poorest adaptability, and the horizontal roof gap is small under large support height, small suspension height, small suspension angle and large tamping angle situation. By means of optimizing structure components and their positional relation and suspension height of backfill scrape conveyor in the process of support design and through controlling working face deployment, roof subsidence in advance, mining height and backfilling during engineering application, the horizontal roof gap is optimized. The research results can be served as theoretical basis for support design and guidance for backfill support to have better performance in backfilling.展开更多
We demonstrate that the insertion of a graphene tunnel barrier between Heusler alloy Co_2MnSi and the germanium（Ge） channel modulates the Schottky barrier height and the resistance–area product of the spin diode. W...We demonstrate that the insertion of a graphene tunnel barrier between Heusler alloy Co_2MnSi and the germanium（Ge） channel modulates the Schottky barrier height and the resistance–area product of the spin diode. We confirm that the Fermi level is depinned and a reduction in the electron Schottky barrier height（SBH） occurs following the insertion of the graphene layer between Co_2MnSi and Ge. The electron SBH is modulated in the 0.34 eV–0.61 eV range. Furthermore,the transport mechanism changes from rectifying to symmetric tunneling following the insertion. This behavior provides a pathway for highly efficient spin injection from a Heusler alloy into a Ge channel with high electron and hole mobility.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11772362 and 11452002)the Special Scientific Research Fund for Super Computing in the Joint Fund of the National Natural Science Foundation of China and the People’s Government of Guangdong Province,China(Phase Ⅱ,nsfc2015_570)
文摘A direct numerical simulation(DNS) method is used to calculate the partitioned convection system with Ra number ranging from 10^7 to 2×10^9.Using the boundary layer thickness to normalize the height of gaps d, we find a strong consistency between the variation of the TD number(the average value of the temperature in each heat transfer channel is averaged after taking the absolute values) with the change of the height of gaps and the variation of the TD number with the change of Ra number in partitioned convection.For a given thickness of partition, heights of gaps are approximately equal to 0.5 or 1 time of the thermal boundary layer thickness λθ at different Ra numbers.TD number representing temperature characteristics is almost the constant value, which means that TD number is a function of d/λθ only.Analysis of local temperature field of area in gaps shows that the temperature distribution in the gaps are basically the same when d/λθ is certain.The heat transfer Nu number of the system at d/λθ≈ 0.5 is larger than that of d/λθ≈ 1, both of them have the same scaling law with Ra number and Nu^Ra^0.25.
文摘Infectious disease departments in hospitals require pressure gradient to create unidirectional airflow to prevent the spread of contaminants,typically by creating active air infiltration through the difference between supply and exhaust air volumes.The door gap is the channel of air flow between rooms,so its height has an important influence on the pressure difference and infiltration air volume of the room.There is still a lack of research on setting reasonable ventilation strategies according to the different heights of door gaps at different positions in the building.In this study,model of a set of isolation wards was established and analyzed using the multi-zone simulation software CONTAM,and the ventilation strategies with different heights of door gaps were applied to the actual infection diseases department.The results show that in a building with ventilation system divided by functional area,the difference in the height of the door gaps requires different active infiltration air volumes.Pressure fluctuations in the medical and patient corridors are greater than in other rooms.The significance of this study is to understand the active infiltration of air to guide the design and operation of ventilation systems in infectious disease hospitals or building remodeled to isolate close contacts of COVID-19 patients.It is also instructive for the design of pressure gradients in clean workshops,biological laboratories,and other similar buildings.
基金Project(2014ZDPY02) supported by the Fundamental Research Funds for the Central Universities,ChinaProject supported by Qinglan Plan of Jiangsu Province,ChinaProject(SKLCRSM12X01) supported by State Key Laboratory of Coal Resources and Safe Mining(China University of Mining & Technology)
文摘For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body's compression ratio. Horizontal roof gap, as a key parameter of backfilling characteristics, may impact the backfilling effect from the aspects of control of roof subsidence in advance, support stress, backfilling process and the support design. Firstly, the reason why horizontal roof gap exists was analyzed and its definition, causes and connotation were introduced, then adopting the Pro/E 3D simulation software, three typical 3D entity models of backfill hydraulic supports were built, based on the influence of horizontal roof gap on backfilling effect, and influence rules of four factors, i.e. support height, suspension height, suspension angle and tamping angle, were emphatically analyzed on horizontal roof gap. The results indicate that, the four factors all have significant impacts on horizontal roof gap, but show differences in influence trend and degree, showing negative linear correlation, positive linear correlation, positive semi-parabolic correlation and negative semi-parabolic correlation, respectively. Four legs type is the most adaptive to the four factors, while six legs(II) type has the poorest adaptability, and the horizontal roof gap is small under large support height, small suspension height, small suspension angle and large tamping angle situation. By means of optimizing structure components and their positional relation and suspension height of backfill scrape conveyor in the process of support design and through controlling working face deployment, roof subsidence in advance, mining height and backfilling during engineering application, the horizontal roof gap is optimized. The research results can be served as theoretical basis for support design and guidance for backfill support to have better performance in backfilling.
基金Project supported by the National Natural Science Foundation of China(Grant No.61504107)the Fundamental Research Funds for the Central Universities,China(Grant Nos.3102014JCQ01059 and 3102015ZY043)
文摘We demonstrate that the insertion of a graphene tunnel barrier between Heusler alloy Co_2MnSi and the germanium（Ge） channel modulates the Schottky barrier height and the resistance–area product of the spin diode. We confirm that the Fermi level is depinned and a reduction in the electron Schottky barrier height（SBH） occurs following the insertion of the graphene layer between Co_2MnSi and Ge. The electron SBH is modulated in the 0.34 eV–0.61 eV range. Furthermore,the transport mechanism changes from rectifying to symmetric tunneling following the insertion. This behavior provides a pathway for highly efficient spin injection from a Heusler alloy into a Ge channel with high electron and hole mobility.
